10029859 - Kettle Klarstein - Free user manual and instructions

Technical Features	Details not available
Usage	Details not available
Maintenance and Repair	Details not available
Safety	Details not available
General Information	Details not available

Frequently Asked Questions - 10029859 Klarstein

How do I connect the Klarstein 10029859?

Make sure the device is turned off, then plug it into an appropriate electrical outlet. Check that the voltage matches the one indicated on the device label.

Why won\u0027t my Klarstein 10029859 turn on?

Check that the device is properly plugged in and that the electrical outlet is working. If the device still won\u0027t turn on, you may need to contact customer service.

How do I clean the Klarstein 10029859?

Unplug the device before cleaning it. Use a soft, damp cloth to clean the exterior. Do not immerse the device in water and do not use abrasive products.

What accessories are included with the Klarstein 10029859?

Accessories may vary depending on the model, but check the contents list in the user manual provided with the device.

The device is making an unusual noise, what should I do?

If the device is making unusual noises, turn it off immediately and unplug it. Check if there are any objects stuck in the mechanism. If the problem persists, contact customer service.

How do I adjust the temperature on the Klarstein 10029859?

Check the device\u0027s control panel to find the temperature adjustment buttons. Follow the instructions in the user manual for precise adjustment.

The device is not heating, what should I do?

Check if the device is properly set and if the settings are appropriate. Also make sure it is properly plugged in. If the problem persists, contact customer service.

Where can I find the user manual for the Klarstein 10029859?

The user manual is usually included in the packaging. You can also download it from the official Klarstein website by searching for the model number.

How do I return a Klarstein product?

To return a product, please check the return policy on the Klarstein website or contact customer service for specific instructions.

What is the warranty for the Klarstein 10029859?

The standard warranty is usually two years, but please check the warranty certificate provided with your product for specific details.

USER MANUAL 10029859 Klarstein

Congratulations on purchasing this equipment. Please read this manual carefully and take care of the following hints to avoid damages. Any failure caused by ignoring the mentioned items and cautions mentioned in the instruction manual are not covered by our warranty and any liability.

Technical Data

Item number 10029859, 10029860, 10029861

Power supplay 220V 50Hz

Safety Instructions

General Hints

• To protect against ceramicical hazards do not immerse the mains plug, power base, or kettle in water or any other liquid.
• Do not use in the bathroom or near any source of water. Do not use outdoors.
• Do not touch hot surfaces. Use handles or knobs.
• Do not open the lid while the water is boiling.
  Take care when pouring pour slowly, and do not overfill the kettle.
• Water can remain hot for a considerable time after boiling and can present a scald hazard. Keep the kettle, the power base, and the mains lead away from the edge of worktops and out of the reach of children.
• Do not allow the mains lead to hang over the edge of the table or worktop, or any where it may be accidentally caught or tripped over.
• Close supervision is necessary when any appliance is used near children.
• Unplug the power base from the wall socket when not in use, before repositioning and before cleaning. Allow the kettle to cool down fully before cleaning and before storing away.
• Ensure that the lid is closed before switching the kettle on, otherwise it may not switch off.
• Check that the kettle is properly located on the power base before switching it on.
• Do not switch on unless the kettle contains at least 1 cupful of water, otherwise you may damage it.
• Remove the kettle from its power base before filling or pouring.
• Do not place the kettle, power base or mains lead on or near any hot surface, hotplate, hot hob or burner.
• Do not use the kettle for any purpose other than heating water.
• Use the kettle only with power base supplied (and vice versa)
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions. Or has been damaged in an manner. If the mains lead is damaged, it must be replaced be a special lead available from the Service department
• Ensure that the lid is closed before switch

Special Safety Notes

• As there is the risk of burns, always close the lid and lock it properly when you are going to turn the kettle on. Never open the lid while hot water is inside and/or the steam density is too high.
• Before switching on the kettle ensure that the water level is between 0.5 and 1.8 liter marks only.
• There is a cut-off device that works if the kettle is overheated. It switches the kettle off when there is no water inside or the water level is too low. Wait until the kettle cools down completely to start boiling after the cut-off device was activated. The kettle will not turn on while too hot. Before switching on the kettle always check that there is water inside the kettle and the water level is not too low.
• Fill the kettle with cold water only.
• Switch the kettle off before removing it from the base.
• The kettle must be used only with the base provided.
• If the kettle is overfilled, boiling water may be ejected.

Operation

NOTE: Boil and pour away water several times before using for the first time. See recommendations below on how to operate the kettle.

1. Place the kettle with its base on a dry, smooth and flat horizontal surface. Place the kettle on heat resistant surfaces only.
2. Take the kettle from the base, open the lid and fill the kettle with cold water.
3. Make sure that the water level is between the minimum and maximum marks on the water level scale. Do not switch on the kettle when empty.
4. Check and correct the filter's position before boiling the water.
5. Close the lid and place the kettle back on the base.
6. Plug to AC outlet with the voltage corresponded to the information on the product label.
7. Switch the kettle on by the on/off switch. The illumination light will go on showing that the water is being boiled.
8. When pouring out the water incline the kettle slightly and gradually. Do not forget that hot water is inside.

Cleaning and Care

1. Unplug the kettle and wait until it cools down completely before cleaning or storing.
2. To avoid the risk of electric shock, do not clean the exterior of the unit, its base or its power cord with water, and do not immerse it in water. The exterior of the kettle may be cleaned with a slightly damp non-abrasive lint-free cloth without additives.
3. The filter may be removed for cleaning purposes. To do this, place the filter vertically, pull upwards and draw out. Wash the outside of the filter in the water flow.
4. Refit all parts when they are completely dry.
5. In the hard water area, it is important to do the decalcification regularly to keep the kettle in good working condition, because too much scale inside may cause the kettle fail to work. For the best performance of your kettle, decalcify the unit from time to time. The frequency depends on the hardness of your tap water and how many times you have used the kettle. Decalcification will clean the interior of the unit.

Dscaling

Method 1: Vinegar

• Fill the kettle with 12 liter of 8% white vinegar.
• Leave to soak for 1 hour without boiling.
• Empty your kettle and rinse it two or three times with cold tap water.

Method 2: Cidric Acid

• Mix 25g of citric acid with 0.5 liter of boiling water.
• Pour the mixture in the kettle.
• Leave to soak for 15 minutes.
• Empty your kettle and rinse it two or three times with tap cold water.
• Repeat the process if needed.

Storage

The appliance should not be stored while hot or plugged in. When not in use, allow the kettle to cool, then put it back into the box and store out of reach of children in safe, dry place.

Hints on Disposal

According to the European waste regulation 2002/96/EG this symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council or your household waste disposal service.

Declaration of Conformity

Producer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.

This product is conform to the following European Directives:

2014/30/EU (EMC)

2014/35/EU (LVD)

2011/65/EU (RoHS)

Chere cliente, cher client,