C4376 - Watch Candino - Free user manual and instructions

Product Type	Wristwatch
Brand	Candino
Model	C4376
Category	Quartz watch
Power Source	Battery (not specified, standard for quartz watch)
Movement	Analog quartz
Display	Hands for hours, minutes, seconds; chronograph subdials
Main Functions	Hour, minute, second, date, chronograph (simple, addition, split time)
Chronograph Subdials	60 seconds, 30 minutes, 1/10 second
Time Setting	Crown in position III (hack seconds)
Date Correction	By rotating crown in position II
Time Zones	Adjustment possible via crown in position II
Resetting Subdials	Via crown in position II or III, individual hand correction
Hack Seconds	Yes, when crown is in position III
Chronograph Type	Quartz mechanical
Care	Avoid shocks, water and magnetic fields
Cleaning	Soft, dry cloth
Battery Replacement	Have it done by a qualified watchmaker
Water Resistance	Not specified (daily water resistant?)
User Manual	26-page PDF available for free download

Frequently Asked Questions - C4376 Candino

How do I set the time on my Candino C4376 watch?

Pull the crown to position III. Turn it to set the hour and minute hands. The second hand stops in position III (hack seconds). Push the crown back in to start the watch.

How do I use the chronograph in simple mode?

Make sure the chronograph hands are at zero. Press the START/STOP pusher (position I) to start. Press again to stop and read the time. Press the reset pusher to reset.

How do I do time addition with the chronograph?

Start the chronograph with START. Press STOP to read a time, then press RESTART to continue timing without resetting. Repeat to accumulate times. Press the reset pusher to clear the total.

How do I use the split time function?

Start the chronograph. Press the SPLIT pusher to display an intermediate time (hands stop for reading). Press RESTART to resume timing. Repeat for each split. Press the reset pusher at the end.

How do I reset the chronograph subdials to zero?

Pull the crown to position II or III to access corrections. Use the pushers or crown to return each subdial hand (60 seconds, 30 minutes, 1/10 second) to its original position. Refer to the manual for precise adjustment.

How do I set the date on the watch?

Pull the crown to position II. Turn it to advance the date. The date corrects at each midnight passage. Do not set the date between 9 PM and 3 AM to avoid damaging the movement.

How do I replace the watch battery?

Battery replacement must be done by a professional watchmaker. Opening the case back requires specific tools. Consult an authorized Candino retailer.

My watch stops or runs slow, what should I do?

First check if the battery is dead. If not, reset the time following the procedure. If the problem persists, it may be a mechanical issue: take it to a watchmaker.

Is the watch water-resistant?

The manual does not specify a water resistance rating. Avoid any contact with water. Do not wear it while showering, swimming or diving. If in doubt, consult the manual or manufacturer.

Where can I download the manual for the Candino C4376?

The full 26-page manual is available for free in PDF format on notice-facile.com. You can also request a translation into your language by providing your email.

USER MANUAL C4376 Candino

2501 Bienne Switzerland

a company of the Festina Group

www.candino.com

CANDINO

SWISS WATCH

MANUAL DEL USUARIO

USER'S MANUAL

MODE D'EMPLOI

By virtue of the regulations pursuant to the handling of waste products deriving from electronic and electrical equipment, end of lifecycle watch making products must be selectively collected for processing. You may therefore dispose of your quartz watch making products at any of our retail outlets or any other authorized collection point. The selective collection, processing, rating and recycling of these products helps contribute to safeguarding the environment and protecting our health.

-Display 12
- Setting the timers to zero. 13
- Setting the time. 14
-Timing Mode. 15-18
- Correction Mode. 19

DISPLAY

WATCH HANDS

A Set the hand of the 60 seconds timer to zero.
B Setting crown
C Set the hand of the 1/10 second timer to zero
D Set the hand of the 30 minutes timer to zero

SETTING THE TIME

SETTING CROWN IN POSITION III

Correction of hour and minute hand and date every passing to midnight.

Note

Setting crown in position III: STOP-SECOND

TIMING MODE

SIMPLE TIMING FUNCTION
Setting crown in position I

1 START/STOP
Read time: -5 minutes -57 seconds -7/10 sec
3 Reset to zero
1 to 3 order of functions

WARNING

Before starting the time, put back the chronograph hands to their original position If necessary, see paragraph SETTING THE TIMERS TO ZERO.

TIMING MODE

ADD FUNCTION
Setting crown in position I

1E

1 to X order of functions

TIMING MODE

SPLIT-TIME OR INTERMEDIATE TIMES FUNCTION
Setting crown in position I

① to ③ order of functions

17

TIMING MODE

SPLIT-TIME OR INTERMEDIATE TIMES FUNCTION

4 to 7 order of functions

CORRECTION MODE

TIME ZONE CORRECTION CORRECTION OF DATE

Setting crown in position II

Note: Date correction every passing to midnight

MODE D'EMPLOI

Stellkrone in Position III:

SEKUNDEN-STOPP

ZEITMESSAGENS-MODUS

Stellkrone in Position I

1 START/ STOPP

1. Abiesen der Zeit

-5 Minutes

-57 Sekunden

-7/10 Sekunden

3 Nullstellung

FUNCTION ADD
Stellkrone in Position I

36