SM400G.2 - Blender AFK - Free user manual and instructions

USER MANUAL SM400G.2 AFK

1. To protect against risk of electrical shock, do not put the blender housing,

cord or plug in water or liquid.

2. Close supervision is necessary when any appliance is used by near children.

3. Unplug from outlet when not in use, before putting on or taking off parts,

and before cleaning.

4. Avoid contact with moving parts.

5. Do not operate any appliance with a damaged cord or plug or after the

appliance malfunctions or is dro pped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or electrical or mechanical adjustment.

6. The use of attachments not recommended or sold by the manufacturer may

caused fire, electric shock, or injury.

7. Do not use outdoors.

8. Do not let cord hang over edge of table or counter or contact hot surfaces,

including the stove.

9. Keep hands and utensils out of container while blending to prevent the

possibility of severe personal injury or damage to the blender. Use a scraper only when the blender is not operating.

10. Blades are sharp. Handle carefully.

11. To avoid injury, neve

r place cutting blade assembly on base without container property attached.

12. Always operate blender with cover in place.

13. If the supply cord is damaged, it must be replaced by the manufacturer, its

service agent or similarly qualified persons in order to avoid a hazard. “This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. -Cleaning and user maintenance shall not be made by children unless they are older than 8 years and supervised.

Identification of parts

1. Place the container jug on the motor housing, then slightly twist it anti-

clockwise until it is locked.

2. Put the products for missing into the jug after dicing them, then add the

liquid, making sure not to go over the maximum level marked on the jug.

3. Put the lid on the jug, and put the lid stopper on the lid, then clip it on.

4. Put in the appliance and set the control switch to

5. Turn the appliance off by setting the control switch to “ 0 “, wait until the

appliance has completely stopped before rem oving the jug.

6. Remove the jug by twisting it in the clockwise direction.

1. After usage, you can clean the jug by using the setting.

2. Pour a little lukewarm water into the jug.

3. Choose the setting for a few seconds.

4. Remove the jug and rinse under running water.

5. Wipe clean the motor housing with a damp cloth; never immerse in water.

“Auto Clean” “4”“3”“2”“1” or “0” Keep the appliance and its cord out of reach of children less than 8 years.” The appliance is not intended to be operated by means of an external timer or separate remote-control system. The appliance is for indoor use only.Technical data Power : 400W Max Voltage : 220-240V~50Hz Maximum capacity ( jug ) : 1500ml

“Auto Clean” “Auto Clean”