PC300 - Controller Crestron - Free user manual and instructions

Product Type	Audiovisual System Controller
Brand	Crestron
Model	PC300
Dimensions (W x D x H)	48.3 x 27.9 x 4.4 cm (1U rack)
Weight	2.7 kg
Power Supply	100-240 V AC, 50/60 Hz, 30 W max
Processor	Series 3, 425 MHz
RAM	256 MB DDR3
Internal Storage	2 GB Flash
Control Ports	4 COM ports (RS-232), 8 IR/Serial ports, 8 relays, 8 infrared inputs/outputs, 1 Ethernet 10/100 port
Network Connectivity	Ethernet 10/100, supports DHCP, DNS, TCP/IP, UDP
Operating System	Crestron 3-Series Firmware
Programming Software	Simpl+ and Simpl# (compatible)
Cooling	Built-in fan, front-to-back airflow
Operating Temperature	0 to 40 °C
Operating Humidity	10% to 90% non-condensing
Rack Mounting	1U, mounting brackets included
Main Functions	Centralized control of AV equipment (projectors, screens, lighting, blinds, etc.), room automation, integration with video conferencing and access control systems
Maintenance and Cleaning	Regular dusting of ventilation grilles with a dry, lint-free cloth. Use a slightly damp cloth for the casing. Do not use solvents or abrasive products.
Safety	Power disconnected before any intervention. Overvoltage protection. Mandatory grounding (grounded outlet). Do not expose to water or moisture. No user-serviceable parts.
Spare Parts and Reparability	Repairs must be carried out by a qualified Crestron technician. Contact Crestron support for spare parts. Limited 2-year warranty (see terms at www.crestron.com/warranty).
General Information	Manufactured by Crestron Electronics, Inc. Certified CE, FCC Class B, WEEE compliant. For assistance, visit crestron.com or contact [e-mail].

Frequently Asked Questions - PC300 Crestron

What is the main function of the Crestron PC300 controller?

The Crestron PC300 is a 3-series controller designed for centralized management of audiovisual equipment in meeting rooms, classrooms, or conference spaces. It can control projectors, screens, lighting, blinds, and other devices via serial, IR, relay, and Ethernet ports.

How do I connect the PC300 to the network?

Use the Ethernet 10/100 port on the rear. Configure the IP address via DHCP (default) or manually. Ensure the network cable is properly connected. The PC300 supports TCP/IP, UDP, and Crestron protocols.

Can I program the PC300 with software other than Crestron?

Programming is primarily done with Simpl+ and Simpl# (C#) in the Crestron Studio environment. The PC300 is not compatible with third-party software.

What should I do if the power LED does not light up?

Check that the power cord is properly connected to the outlet and the unit. Try a different power outlet. If the problem persists, contact Crestron support.

The PC300 is noisy (fan): is this normal?

Yes, the PC300 is equipped with a fan for cooling. Some noise is normal. If the noise becomes excessive or intermittent, check that the ventilation grilles are not blocked and clean them if necessary. If the problem persists, consult a technician.

How do I reset the PC300 to factory settings?

Use the reset function in the configuration menu via the web interface or Crestron software. A hardware reset can be performed by holding down the reset button (if present) for 10 seconds. Refer to the manual for details.

What types of cables should I use for the serial ports (RS-232)?

Use standard DB9 serial cables. The pinout is typically DTE configuration. Refer to the manual for the exact pinout. Ensure the total length does not exceed 15 meters.

Can I mount the PC300 in a standard rack?

Yes, the PC300 has a height of 1U and is supplied with mounting brackets for a 19-inch rack. Ensure adequate ventilation around the unit.

Does the PC300 support modern control protocols (IP, WiFi, Bluetooth)?

The PC300 supports Ethernet (10/100) for IP control, but does not have built-in WiFi or Bluetooth. For wireless connectivity, use appropriate Crestron gateways.

How can I get a copy of the manual in French?

The manual is available for free in PDF format on notice-facile.com or on the official Crestron website. You can also request a translation by sending an email with your desired language.

USER MANUAL PC300 Crestron

Crestron Electronics, Inc.

The original language version of this document is U.S. English.

All other languages are a translation of the original document.

The product warranty can be found at www.crestron.com/warranty.

The specific patents that cover Crestron products are listed online at www.crestron.com/legal/pat Chinese: Crestron 产品所覆盖的特定专利列表可在线查看www.crestron.com/legal/patents。

Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron Elec Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and names may be used in this document to refer to either the entities claiming the marks and their products. Crestron disclaims any proprietary interest in the marks and names of others. Not responsible for errors in typography or photography.

©2023 Crestron Electronics, Inc.

English

Important Safety Instructions

• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

- Do not install near any heat sources radiators, heat registers, stoves, or ot apparatus (including amplifiers) that produce heat.

- Do not defeat the safety purpose of polarized or grounding-type plug. A polarized plug has two blades with a wider than the other. A grounding-type has two blades and a third grounding-prong. The wide blade or the third is provided for your safety. If the providing plug does not fit into your outlet, an electrician for replacement of the obso outlet.

- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

- Only use attachments/accessories specified by the manufacturer.

- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the equipment. When a cart is used, use of when moving the cart/equipment combination to avoid injury from tipping over.

- Unplug this apparatus during lightning storms or when unused for long periods of time.

- Refer all servicing to qualified service This is personnel. Servicing is required when the shall apparatus has been damaged in any way with an such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the device. This dev. apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

• Disconnect power prior to connecting or disconnecting equipment.
• Do not install in direct sunlight.
• The apparatus must be installed in a way that the power cord can be removed either from the wall outlet or from the device itself in order to disconnect the mains power.
• Prevent foreign objects from entering the device.

WARNING:

To reduce the risk of fire or electric shock, it is not exposed this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing. Objects filled with liquids, such as vases, should not be placed on the apparatus.

WARNING:

To prevent electric shock, do not remove cover. There are no user serviceable parts inside. Only qualified service personnel should perform service.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING:

an apparatus with Class I construction be connected to an electrical outlet earthing ground terminal.

IMPORTANT:

jects This device can be used with Class 2 output wiring.

Waste Electrical & Electronic Equipment Contact

Directive

If you have any questions, please contact

The Waste Electrical & Electronic Equipm@nestron.

(WEEE) directive marking on a product North and South America:

indicates that it should not be disposed Cefstron Electronics, Inc.

with general waste. Instead, you are 15 Volvo Drive

encouraged to reuse or recycle the product Rockleigh, NJ 07647 USA

accordance with Directive 2012/19/EU of the Europe, Middle East, and Africa:

European Union. Proper disposal of this Crestron Europe BV

product will help prevent potential negative effects on the environment and human Oude Keerbergsebaan 2,

effects on the environment and human 2820 Rijmenam, Belgium

health, which could otherwise be caused by VAT No. BE0699.717.121

Inappropriate waste handling. Penalties may be applicable for incorrect disposal of this Australia and New Zealand:

waste in accordance with your national Crestron ANZ PTY. Ltd.

legislation. For information about recycling Level 5, 15 Help Street,

this product, please contact your household Chatswood NSW 2067, Australia

waste disposal service, your original distributor, or Crestron.

Asia:

Crestron Singapore Pte. Ltd.

30, rue Cecil

21-05, Tour Prudential

049712 de Singapour

Phone:

Please visit crestron.com to find the phone

number for Crestron support in your region.

Email:

[e-mail] or

[e-mail]

North and South America:

Crestron Electronics, Inc.

15 Volvo Drive

Rockleigh, NJ 07647 USA

Europe, Middle East, and Africa:

Crestron Europe BV

2820 Rijmenam, Belgium

VAT No. BE0699.717.121

Australia and New Zealand:

Crestron ANZ PTY. Ltd.

Level 5, 15 Help Street,

Chatswood NSW 2067, Australia

Asia:

Crestron Singapore Pte. Ltd.

30, rue Cecil

21-05, Tour Prudential

049712 de Singapour

电话:

North and South America:

Crestron Electronics, Inc.

15 Volvo Drive

Rockleigh, NJ 07647 USA

Europe, Middle East, and Africa:

Crestron Europe BV

2820 Rijmenam, Belgium

VAT No. BE0699.717.121

Australia and New Zealand:

Crestron ANZ PTY. Ltd.

Level 5, 15 Help Street,

Chatswood NSW 2067, Australia

Asia:

Crestron Singapore Pte. Ltd.

30, rue Cecil

21-05, Tour Prudential

049712 de Singapour

電話:

North and South America:

Crestron Electronics, Inc.

15 Volvo Drive

Rockleigh, NJ 07647 USA

Europe, Middle East, and Africa:

Crestron Europe BV

2820 Rijmenam, Belgium

VAT No. BE0699.717.121

Australia and New Zealand:

Crestron ANZ PTY. Ltd.

Level 5, 15 Help Street,

Chatswood NSW 2067, Australia

Asia:

Crestron Singapore Pte. Ltd.

30, rue Cecil

21-05, Tour Prudential

049712 de Singapour

Telefon:

Europe, Middle East, and Africa:

ADVERTENCIA:

Australia and New Zealand:

Crestron ANZ PTY. Ltd.

Level 5, 15 Help Street,

Chatswood NSW 2067, Australia

Asia:

Level 5, 15 Help Street,

21-05, Tour Prudential

North and South America:

Crestron Electronics, Inc.

15 Volvo Drive

Rockleigh, NJ 07647 USA

Europe, Middle East, and Africa:

Crestron Europe BV

2820 Rijmenam, Belgium

VAT No. BE0699.717.121

Australia and New Zealand:

Crestron ANZ PTY. Ltd.

Level 5, 15 Help Street,

Chatswood NSW 2067, Australia

Asia:

Crestron Singapore Pte. Ltd.

30, rue Cecil

21-05, Tour Prudential

049712 de Singapour

電話:

North and South America:

deFestron Electronics, Inc.

95 Volvo Drive

Rockleigh, NJ 07647 USA

Europe, Middle East, and Africa:

2820 Rijmenam, Belgium

VAT No. BE0699.717.121

Australia and New Zealand:

en Crestron ANZ PTY. Ltd.

Level 5, 15 Help Street,

Chatswood NSW 2067, Australia

Asia:

Crestron Singapore Pte. Ltd.

30, rue Cecil

21-05, Tour Prudential

049712 de Singapour

Telefoon:

North and South America:

Crestron Electronics, Inc.

15 Volvo Drive

Rockleigh, NJ 07647 USA

Europe, Middle East, and Africa:

Crestron Europe BV

2820 Rijmenam, Belgium

VAT No. BE0699.717.121

Australia and New Zealand:

Crestron ANZ PTY. Ltd.

Level 5, 15 Help Street,

Chatswood NSW 2067, Australia

НИЕAsia:

Chestron Singapore Pte. Ltd.

30, Я rule Cecil

21005, Tour Prudential

049712 de Singapour

^T PT ^K елеф ^C он: