746 Rotary Phone - Phone GPO - Free user manual and instructions

USER MANUAL 746 Rotary Phone GPO

USER GUIDEContents English 3 German 7 French 11 Spanish 15 Dutch 193 English4

IMPORTANT SAFETY INSTRUCTIONS

• Never install telephone wiring during a lightning storm.

• Never install telephone jacks in wet locations, unless the jack is specically designed for wet locations.

• Never touch uninsulated telephone wires or terminals, unless the telephone line has been disconnected at the network interface.

• Do not place this product on an unstable cart, stand or table. The product may fall, causing damage to the product. INSTALLATION

• Connect the telephone line cord to the line jack (RJ11C). To ensure proper connection, press the locking tab rmly into the modular jack until a “click” sound is heard. ADJUSTMENT

• Set the phone to either tone or pulse system that your telephone services company supports

• Set the ringer volume lever selector to on (with sounds) or off to your own preference. TEL LINE TONE PULSE OFF ON5 OPERATION Making calls:

• Remove the receiver from the cradle.

• Press the numerical button to dial the desired Numbers Receiving call:

• When there is an incoming call, lift the receiver from the cradle and talk into the mouthpiece to begin your conversation.

• To terminate the conversation, replace the receiver back in the cradle6 CE STATEMENT This equipment conforms to the following european standards: Health & safety: EN60950-1:2001 (+A11:2004) EN50371:2002 Electromagnetic compatibility: EN55022:2006 emissions EN55024:1998 + A1:2001 immunity. Telecom: ES 203021 parts 1, 2 & 3 TBR387 German8 WICHTIGE SICHERHEITSVORSCHRIFTEN