BC1500 - Kitchen scales UFESA - Free user manual and instructions

USER MANUAL BC1500 UFESA

Congratulations on your choice of our appliance, welcome among the users of ufasa products.

In order to achieve best possible results we recommend using exclusively original ubesa accessories. They have been specially designed for this product.

Please read this instruction manual carefully. Pay special attention to important safety instructions. Keep this instruction manual for future reference.

Handling instructions

Do not hit Do not use or store in humid

Do not immerse in water

Technical parameters

Technical parameters are shown on the rating plate. Measurement accuracy: ± 1g

Capacity: 2g - 5000g

Battery: 2 × CR2032.

The appliance meets the requirements of the applicable standards.

The appliance is compliant with the requirements of the following directives:

Electromagnetic compatibility (EMC) - 2004/108/EC.

The CE mark is shown on the product's rating plate.

Features

Electronic display
Weight unit conversion button Unit
3 On/Off \ Reset (Tare) button
4 Rubber feet
Metal weighing platform
6 Battery compartment

Operation and Performance

Before the first use

1 Remove the scales from the packaging.
2 Remove the battery protection (see "Battery Replacement").

Operation

1 Place the scales on a hard, level surface. Do not use the appliance on carpets or any soft surfaces.
2 Press the button (3) to switch on the appliance.
Wait until the display shows.
4 Select the required weight unit (see "Weight Unit Selection").
When the weighing has been completed, press the U T (3) button and hold it for about 2 seconds to switch off the appliance.

Warning indicators

The battery must be replaced - will appear on the display. The scales will switch off automatically after several seconds.

Weight overload - the display will show .EEE Remove the item in order not to damage the scales.

Do not exceed the maximum capacity of 5000g (5 kg).

Display - symbols

• • negative value

TARE - reset (tare)
lb oz - pounds, ounces
fl oz. - ounces
g - grams
ml - millilitres

"-" will appear on the display when the tare function is used or when the tared container or another item is removed from the scales.

Description of functions

Weighing

Press the button (3) to switch on the appliance.
Wait until the display shows.
3 Select the required weight unit (see "Weight Unit Selection").
4 Place the items that you wish to weigh on the metal weighing platform (Do not exceed the maximum capacity of 5000 g!).

500

Reset (tare)

When the appliance is on, and the display shows, place a plate, bowl or another container on the scales and press the button (3) to reset the scales.

The "TARE" symbol will only be shown if the container is heavier than 600 g.

Automatic switch-off

The appliance will switch off automatically if no operation is carried out for approx. 60 seconds.

To maximize the life of batteries, it is recommended to switch off the scales when you have finished the operation.

Weight unit selection

The appliance has a weight unit selection function. To change the unit, press the Unitersion button (2) until the required unit appears on the display.

Battery replacement

You will find the battery compartment at the bottom of the scales. Open the compartment and remove battery protection before the first use.

To replace the batteries, remove the compartment lid (6) and take the used batteries out.
2 Replace the old batteries with two new CR2032 batteries. Make sure that the + / - terminals are the correct way round.
3 Close the compartment lid.

Cleaning and Maintenance

Clean the appliance with a slightly damp cloth. Do not immerse the scales in water. Do not use caustic chemical detergents.

All plastic components should be cleaned immediately if soiled with grease, spices, vinegar or food with an intensive taste/colour. A contact with sour citric fruit juices should be avoided.

Advice on disposal

Our goods come in optimised packaging. This basically consists in using non-contaminating materials which should be handed over to the local waste disposal service as secondary raw materials.

This product complies with EU Directive 2002/96/EC. The crossed wheelie bin symbol shown on the appliance indicates that when it comes to dispose of the product it

must not be included in with household refuse. It must be taken to a special refuse collection point for electric and electronic appliances or returned to the distributor when purchasing a similar appliance. Under current refuse disposal regulations, users who fail to take discarded appliances to special refuse collection points may be penalised. Correct disposal of discarded appliances means that they can be recycled and processed ecologically, helping the environment and allowing materials used in the product to be reused. For more information on available waste disposal schemes contact your local refuse service or the shop where the product was purchased. Manufacturers and importers are responsible for ecological recycling, processing and disposal of products, whether directly or via a public system.

Your local town council can provide you with information about how to dispose of obsolete appliances.

The manufacturer/importer does not accept any liability for any damages resulting from unintended use or improper handling. The manufacturer/importer reserves his rights to modify the product any time in order to adjust it to law regulations, norms, directives, or due to construction, trade, aesthetic or other reasons, without notifying in advance.

Cher client,

jS jJUJIyI yu JUJIyI yu JUJIyI yu JUJIyI

Juaa ydae jge aagwoln glaoy yj n jilal

joo jno gaiy aay bgy jg yalgl

Sogoc

jgeJl jn alxllg |d| lslk| n jrddy

.

Jnllpsswby aaleo and

5

1

2

6

4

b,050

y 40

S OBC = S COD + S_ BOC

aoglo

Glll l 10g 100000000000000000000000000

p1j±1:uljallu

5000-2:

.CR2032x2:

Jgaleoll jlll lalllbfoaol aln

:JtJUgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJg

.2004/108/EC-EMC)

CE 00

ufesa

BSH Electrodomesticos Espana, S.A.

C.I.F.: A-28-893550

C/ Itaroa, n^0 1, 31.620 HUARTE (Navarra)

Espana