BS 1304 P - Vacuum Cleaner CLATRONIC - Free user manual and instructions

USER MANUAL BS 1304 P CLATRONIC

Exterior view of a black and orange ECO-CYCLON vacuum cleaner with coiled red hose (no text or symbols visible)

Overview of the Components ...... Page 3

Instruction Manual......Page 30

Technical Data Page 33

Disposal Page 34

NEDERLANDS

Inhoud

Labeled diagram of a vacuum cleaner with numbered parts and an inset showing the component's structure.

Bedienungsanleitung

3D rendered mechanical component with teeth and a curved base, labeled 'A' in the corner (no text or symbols on the object itself)

Close-up of a hand holding a small container with a handle, labeled 'B' in the corner (no text or symbols on the device itself)

Close-up of a hand holding a small mechanical component, possibly a valve or pump, with no visible text or symbols.

Close-up of a hand holding a cylindrical device with a handle, no visible text or symbols

Two-step illustration of a hand holding a cylindrical device, labeled A and B (no text or symbols on the device itself)

• Directive Ecodesign (ErP) 2009/125/EC

Close-up of a small, textured object resembling a mechanical device or device with no visible text or symbols.

Close-up of a hand holding a small cylindrical device with a handle, labeled 'B' in the corner (no visible text or symbols on the device itself)

3D rendered mechanical component with no visible text or symbols

Close-up of hands operating a cylindrical device with a handle, labeled 'B' in the corner (no visible text or symbols on the device itself)

Thank you for selecting our product. We hope that you will enjoy use of the appliance.

Symbols in these Instructions for Use

Important information for your safety is specially marked. It is essential to comply with these instructions in order to avoid accidents and prevent damage to the machine:

WARNING:

This warns you of dangers to your health and indicates possible injury risks.

CAUTION:

This refers to possible hazards to the machine or other objects.

NOTE:

This highlights tips and information.

General Notes

Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing. If you give this device to other people, please also pass on the operating instructions.

• The appliance is designed exclusively for private use and for the envisaged purpose. This appliance is not fit for commercial use.
• Do not use the appliance outdoors. Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the appliance with wet hands. If the appliance is humid or wet, unplug it immediately.
• When cleaning or putting it away, switch off the appliance and always pull out the plug from the socket (pull the plug itself, not the lead) if the appliance is not being used and remove the attached accessories.
• Do not operate the machine without supervision. If you leave the room you should always turn the device off. Remove the plug from the socket.
• The device and the mains lead have to be checked regularly for signs of damage. If damage is found the device must not be used.
• Use only original spare parts.
• In order to ensure your children's safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.

WARNING!

Do not allow small children to play with the foil. There is a danger of suffocation!

Special Safety Instructions for this appliance

• Do not try to repair the appliance on your own. Always contact an authorized technician. To avoid the exposure to danger, always have a faulty cable be replaced only by the manufacturer, by our customer service or by a qualified person and with a cable of the same type.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
  • Children shall not play with the appliance.

• Cleaning and user maintenance shall not be made by children without supervision.

• Do not suck up liquids!

• Do not suck up hot ashes or pointed or sharp objects!
• Do not use the device in damp rooms!
• Never use without the filter. Check that the filter is inserted correctly!
• Hair, clothing and body parts away from the vacuum nozzle during use!
• Keep the vacuum cleaner away from sources of heat like radiators, ovens, etc.!

Overview of the Components

1 Suction hose
2 Air control
3 Telescopic suction tube
4 Connection head of the vacuum hose
5 Hose connection
6 Dust collector with HEPA filter
7 Carrying handle
8 Dust collector release button
9 Cable-winding button
10 On/off switch
11 Positioning aid
12 Lever for opening the ventilation grille (with output filter)
13 Dust collector base plate
14 Lever for extending and retracting the brushes
15 Floor nozzle (with hook (not shown))

Accessories not shown:

Groove and brush nozzle

Start-up

• Insert the connecting head of the suction hose into the hose connection of the appliance. Turn the connecting head clockwise to secure.
• In order to disconnect the hose, turn the connecting head anti-clockwise.
• Insert the vacuum tube into the handle if required.
• You can use the sliding switch on the telescopic suction tube to adjust the length individually.
• Then assemble the floor nozzle and/or the accessories.

Nozzle Attachment

Floor nozzle (15)

The floor nozzle is fitted with rollers for easier guiding. You can clean smooth surfaces and carpets with the floor nozzle.

- Adjust the brushes outwards or inwards using the lever (14). Best use of the appliance depends on the texture of the floor covering. We recommend the following use:

• Use without brushes: For vacuuming floor coverings with a deep pile

• Use with brushes: For vacuuming smooth floors and carpets with a shallow pile

Crevice and jointed nozzle

For vacuuming upholstery, curtains and in corners and crevices etc.

NOTE: "2-in-1" nozzle:

When this is folded together it can be used as a groove nozzle. If you would like to use the brush nozzle, pull the brush section in the direction of the arrow until it locks in place.

To detach the nozzle attachments from the suction pipe, pull them off by turning them slightly.

Using the Appliance

1. Unwind the length of cable you require.

CAUTION:

• Pull out the cable up to the maximum length indicated with the yellow mark.
• Never pull the cable out up to the red mark as the cable winding can be damaged.

i NOTE:

If the red mark is visible, pull in the cable with the help of the cable winding button back to the yellow mark.

1. Insert the mains plug into a correctly installed power socket.

2. Turn the device on by the on/off switch by pressing down the button.

3. Set the "carpet/hard floor" switch, depending on the floor covering.

4. Vacuum at a steady speed. There is no need to exert pressure.

i NOTE:

Pay attention to the range that can be covered with the cable length!

Air Slide (2)

Open the air slide on the hose handle in order to regulate the airflow or to clear any particles sticking to the nozzle.

Switching off and Winding up the Mains Lead

1. Turn the vacuum cleaner off by the on/off switch and remove the plug from the socket.
2. Keep the plug in your hand.
3. Press the cable winding button and guide the cable. Hold the cable to avoid wrapping.

Maintenance

Emptying the dust collector

Empty the dust collector once the collected dirt reaches the MAX marking.

1. Disconnect the mains plug from the wall socket.
2. Disconnect the hose from the hose connection.
3. Press the button (8) to release the dust collector. Remove the dust collector.

(Fig. A)

3D rendered mechanical component with no visible text or symbols

1. Empty the dust collector over a dustbin. In order to do so, press the button on the dust collector to open the base plate.

(Fig. B)

Close-up of hands operating a cylindrical device with a handle, labeled 'B' in the corner (no visible text or symbols on the device itself)

1. Then close the base plate again.
2. Attach the dust collector to the appliance. First position it at the bottom of the appliance and then secure it with the hook on top.
3. Check that the position of the dust collector is secure by briefly lifting the appliance at its carrying handle.

Filter

Your appliance features 4 filters. The common dust bag system has been replaced by a transparent dust collector. The higher flow speed of the collector allows for heavy dirt and smallest floating particles to be separated from the "sucked-in air".

It is thus not necessary to buy dust bags.

HEPA filter

Clean the filter element twice a year.

CAUTION:

• Never wash the filter in the washing machine.
• Do not use a hairdryer for drying.
• Only use the appliance after the filters have been installed correctly.

Proceed as follows to remove, clean and reinstall the filter element:

1. Empty the dust collector as described previously.

2. Remove the dust collector lid. To do so, turn the ▼ marking on the lid towards the □ symbol. Pull the filter element from the dust collector.

3. Remove the filter element from the lid by turning the filter element towards ☐.

4. Pull the nylon filter from the HEPA.

5. Use a brush to clean the filters. In case of heavy staining, clean the filters under running water.

6. Let the filters air-dry completely before refitting them!

7. Wipe the dust collector with a damp cloth and then wipe it dry.

8. Once the filters are completely dry, attach the nylon filter to the HEPA filter (see the figure on page 3).

9. Reinsert the filter element into the lid of the dust collector, using the notches in the lid. Turn the filter element towards the 🔔 symbol until it clicks into place.

10. Reinsert the lid including the filter element into the dust collector. Close the lid until the ▼marking is aligned with the symbol.

11. Fit the dust collector in the appliance.

Outlet filter

The appliance is also equipped with an outlet filter. It is located on the rear of the device under the parking aid.

1. Push down the lever (12) and remove the ventilation grille.
2. Remove the filter insert and clean it as described above.
3. Place the completely dry filter back into the ventilation grille.
4. Put the ventilation grille back on the appliance. Observe the guide lugs. The ventilation grid must engage audibly.

Cleaning

WARNING:

• Before cleaning remove the mains lead from the socket.
• Under no circumstances should you immerse the device in water for cleaning purposes. Otherwise this might result in an electric shock or fire.

CAUTION:

• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.

Clean the housing with a soft, dry cloth without additives.

Storage

• Let the device cool down completely.
  • Wind the cable completely.
• Please insert the hook of the floor nozzle into the parking assistant on the rear of the device.

Troubleshooting

• The Device Does Not Work.

Remedy: Check the connection to the mains. Check the position of the switch.

• The device does not suck up anything.

Possible Cause: The dust collector is full.

Remedy: Empty the dust collector.

or

Possible Cause: The filters are dirty.

Remedy: Clean the components.

or

Possible Cause: There is a foreign body in the suction tube or the nozzle.

Remedy: Check the accessories for foreign bodies.

Technical Data

Model: BS 1304
Power supply: 220-240 V\~, 50/60 Hz
Protection class: II
Net weight: 4.50 kg

The right to make technical and design modifications in the course of continuous product development remains reserved.

Technical Data for vacuum cleaners

COMMISSION DELEGATED REGULATION (EU)

Nr. 665/2013

Trade mark Clatronic
Model BS 1304
Energy efficiency class ^1)		A
energy consumption
annual energy consumption ^2)	kWh/year	27.0
Cleaning performance class
Carpet cleaning performance class		D
Hard floor cleaning performance class		A
Dust re-emission class G
Sound power level dB(A) re1pW	83
Rated input power W 700

1) A (highest efficiency) to G (lowest efficiency).
2) Indicative annual energy consumption (kWh per year), based on 50 cleaning tasks.
Actual annual energy consumption will depend on how the appliance is used.

The device meets the European standards and directives in the current version at delivery:

• Low Voltage Directive (LVD) 2014/35/EU
• Electromagnetic Compatibility (EMC) Legislation Directive 2014/30/EU
• RoHS-directive 2011/65/EU
• Ecodesign-directive (ErP) 2009/125/EC
- Ecodesign requirements for vacuum cleaners COMMISSION REGULATION (EU) No 666/2013

Disposal

Meaning of the "Dustbin" Symbol

Protect our environment: do not dispose of electrical equipment in the domestic waste.

Please return any electrical equipment that you will no longer use to the collection points provided for their disposal.

This helps avoid the potential effects of incorrect disposal on the environment and human health.

This will contribute to the recycling and other forms of reutilisation of electrical and electronic equipment.

Information concerning where the equipment can be disposed of can be obtained from your local authority.

Instrukcje obsługi

Close-up of a mechanical device with teeth and a labeled section A (no visible text or symbols on the device itself)

Close-up of hands operating a mechanical device with a handle and spool (no visible text or symbols)

CTC Clatronic Sp. z o.o

3D rendered mechanical component with no visible text or symbols

Close-up of hands operating a mechanical device with a handle and spool (no visible text or symbols)

3D rendered mechanical component with textured surfaces and a labeled section A (no text or symbols on the object itself)

Close-up of hands operating a water dispenser with a handle (no visible text or symbols)

Close-up of a mechanical component with teeth and a curved handle, labeled 'A' in the corner (no text or symbols on the object itself)

Close-up of hands operating a kitchen blender with a handle (no visible text or symbols)