X5 - Smartphone HONOR - Free user manual and instructions

USER MANUAL X5 HONOR

• To power on your device, press and hold the power button until the screen turns on.

• To power o your device, press and hold the power button, and then touch .

• To resta your device, press and hold the power button, and then touch .

• Press and hold the Power and Volume down buttons for more than 10 seconds to force resta your device. Volume button Power button/ Fingerprint sensor USB Type-C po Headset jack Card slot

• Check out the pre-installed Tips app and master all the great features on your device. 1Getting Staed

• Be careful not to scratch your device or hu yourself when using the eject pin.

• Store the eject pin out of the reach of children to prevent accidental swallowing or inju.

• Do not use cut or modied SIM or microSD cards with your device as these may not be recognized and could damage the card tray (slot).

• If your SIM card does not match your device, please contact your carrier. Follow the instructions in the following gures to set up your device. Please use the eject pin included. Ensure that the card is correctly aligned and that the card tray is level when you inse it into your device. SIM Card Management Select the default mobile data card and calling card as needed. For details, check out the pre-installed Tips app.

• 4G seice depends on the suppo of your network carrier and its deployment of relevant seices. Please contact your carrier to activate 4G seice.

• 4G seice may be unavailable in ceain areas due to network inteerence.

• If this guide is inconsistent with the description on the ocial website, the latter prevails. 2For More Information If you encounter any problems while using your device, you can obtain help from the following resources:

• Visit https://www.hihonor.com to view device information and other information.

• Visit https://www.hihonor.com/global/suppo/ for the most up-to-date contact information for your count or region.

• Go to Settings and enter the following keywords in the search box to view the corresponding information. E.g. Legal information, Safety information, Authentication info, Regulato information. Safety Information Please read all of the safety information carefully before using your device to ensure its safe and proper operation and to learn how to dispose of your device properly. Operation and safety

• To prevent possible hearing damage, do not listen at high volume levels for long periods.

• Using an unapproved or incompatible power adapter, charger, or batte may damage your device, shoen its lifespan, or cause a re, explosion, or other hazards.

• Ideal operating temperatures are 0 °C to 35 °C. Ideal storage temperatures are -20 °C to +45 °C.

• Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential inteerence with the pacemaker. If using a pacemaker, hold the device on the side opposite the pacemaker and do not car the device in your front pocket.

Keep the device and the batte away from excessive heat and direct sunlight. Do not place them on or in heating devices, such as microwave ovens, stoves, or radiators. 3• Obsee local laws and regulations while using the device. To reduce the risk of accidents, do not use your wireless device while driving.

• While ying in an aircraft or immediately before boarding, only use your device according to instructions provided. Use of a wireless device in an aircraft may disrupt wireless networks, present a hazard to aircraft operation, or be illegal.

• In order to avoid damaging the internal circuit of the device or charger, do not use the device in a dusty, damp, or diy place, or near a magnetic eld.

• When charging the device, make sure the power adapter is plugged into a socket near the devices and is easily accessible.

• Unplug the charger from electrical outlets and the device when not in use.

• Do not use, store or transpo the device where ammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or re.

• Keep the batte away from re, and do not disassemble, modify, throw, or squeeze it. Do not inse foreign objects into it, submerge it in water or other liquids, or expose it to external force or pressure, as this may cause the batte to leak, overheat, catch re, or even explode.

• Dispose of this device, the batte, and accessories according to local regulations. ey should not be disposed of in normal household waste. Improper batte use may lead to re, explosion, or other hazards.

• Please consult your doctor and the device manufacturer to determine if using your device may inteere with the operation of your medical device.

Adhere to any rules or regulations set foh by hospitals and health care facilities.

is device contains a built-in batte. Do not attempt to replace the batte by yourself. Otherwise, the device may not run properly or it may damage the batte. For your personal safety and to ensure that your device runs properly, you are 4strongly advised to contact an authorized seice center for a replacement. Potentially Explosive Atmosphere Power o your device in any area with a potentially explosive atmosphere, and comply with all signs and instructions. Areas that may have potentially explosive atmospheres include the areas where you would normally be advised to turn o your vehicle engine. Triggering of sparks in such areas could cause an explosion or a re, resulting in bodily injuries or even deaths. Do not power on your device at refueling points such as seice stations. Comply with restrictions on the use of radio equipment in fuel depots, storage, and distribution areas, and chemical plants. In addition, adhere to restrictions in areas where blasting operations are in progress. Before using the device, watch out for areas that have potentially explosive atmospheres that are often, but not always, clearly marked. Such locations include areas below the deck on boats, chemical transfer or storage facilities, and areas where the air contains chemicals or paicles such as grain, dust, or metal powders. Ask the manufacturers of vehicles using liqueed petroleum gas (such as propane or butane) whether this device can be safely used in their vicinity. Disposal and Recycling Information e symbol on the product, batte, literature, or packaging means that the products and batteries should be taken to separate waste collection points designated by local authorities at the end of the lifespan. is will ensure that EEE waste is recycled and treated in a manner that consees valuable materials and protects human health and the environment. For more information, please contact your local authorities, retailer, or household waste disposal seice or visit the website https://www.hihonor.com/

Reduction of hazardous substances is device and its electrical accessories comply with local applicable rules on the restricted use of ceain hazardous substances in electrical and electronic devices, such as the Restriction of Hazardous 5Substances Directive (RoHS) and Batteries Directive (where batteries are included). RF Exposure Information e World Health Organization has stated that exposure can be reduced by limiting your usage or simply using a hands-free kit to keep the device away from the head and body. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement. For the countries that adopted the SAR limit 2.0 W/kg over 10 grams of tissue. e device complies with RF specications when used near your ear or at a distance of 0.50 cm from your body. e highest repoed SAR value: head SAR: 0.91 W/kg; body SAR: 1.02 W/kg. EU Regulato Compliance Hereby, Honor Device Co., Ltd. declares that this device is in compliance with the Radio Equipment Directive 2014/53/EU (RED). For more details, please refer to the EU Declaration of Conformity at https://www.hihonor.com/global/legal/ceication/

Frequency Bands and Power e frequency bands and transmitting power (radiated and/or conducted) nominal limits applicable to this radio equipment are as follows: WOD- LX2 GSM900: 35.5dBm, GSM1800: 32.5dBm, WCDMA900/2100: 25.7dBm, LTE Band 1/3/7/8/20/28/38/40/41: 25.7dBm, Bluetooth 2.4GHz: 20dBm, Wi-Fi 2.4GHz: 20dBm, Wi-Fi 5G: 5150-5250MHz: 23dBm, 5250-5350MHz: 20dBm, 5470-5725MHz: 20dBm, 5725-5850MHz: 14dBm Legal Notice Trademarks and Permissions Android is a trademark of Google LLC. LTE is a trademark of ETSI.

word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Honor Device Co., Ltd. is under license. 6Wi-Fi

https://www.hihonor.com/privacy-policy/worldwide/.