Monitor S 10 B - Speaker MAGNAT - Free user manual and instructions

Title	Description
Speaker type	Monitor
Rated power	100 Watts
Impedance	8 Ohms
Frequency response	38 Hz - 30 kHz
Dimensions (HxWxD)	350 x 220 x 290 mm
Weight	6.5 kg
Recommended use	Home listening, studio monitoring
Connectivity	Screw terminals for speaker cables
Maintenance	Regular cleaning of the grille and surfaces, checking connections
Safety	Avoid exposure to moisture, do not exceed rated power
General information	Designed for precise and clear sound reproduction

Frequently Asked Questions - Monitor S 10 B MAGNAT

Why does my MAGNAT Monitor S 10 B produce no sound?

First, check that the device is properly connected to the power supply and that the volume is set to an audible level. Also ensure that the audio cables are correctly connected to the source and the speakers.

How can I improve the sound quality of my MAGNAT Monitor S 10 B?

Try repositioning the speakers to avoid walls or objects that might block the sound. Also make sure the audio source is of good quality and the equalizer settings are properly configured.

My speaker emits unwanted noise, what should I do?

Check the cable connections to ensure they are securely attached. Keep electronic devices that may cause interference, such as mobile phones or Wi-Fi routers, away.

The speaker turns off by itself, what should I do?

This may be due to thermal protection being activated. Make sure the speaker is well ventilated and that the power supplied does not exceed the recommended maximum capacity. If the problem persists, contact customer service.

Can I use the MAGNAT Monitor S 10 B with a non-compatible amplifier?

It is recommended to use an amplifier that matches the power and impedance specifications of the speakers. Check the technical specifications to avoid damaging the speakers.

How do I clean my MAGNAT Monitor S 10 B?

Use a soft, dry cloth to wipe the surface of the speakers. Avoid harsh chemical products that could damage the materials.

What is the warranty period for the MAGNAT Monitor S 10 B?

The standard warranty period is usually 2 years from the date of purchase. Check the specific conditions on your receipt or with the retailer.

Where can I find spare parts for the MAGNAT Monitor S 10 B?

You can contact MAGNAT customer service or visit their website for information on spare parts and repairs.

USER MANUAL Monitor S 10 B MAGNAT

MONITOR S 80 ATM
MONITOR S 70
MONITOR S 30
MONITOR S 14 C
MONITOR S 12 C
MONITOR S 10 D
MONITOR S 10 B

BEDIENUNGSANLEITUNG/GARANTIEURKUNDE OWNER'S MANUAL/WARRANTY DOCUMENT MODE D'EMPLOI/CERTIFICAT DE GARANTIE

Magnat

Dolby Atmos

Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation.

At the end of the product's useful life, please dispose of it at appropriate collection points provided in your country.

Main Speaker Top Speaker

Konfiguration: 212 Wege Bassreflex 2-Wege Koaxial

Dear MAGNAT Customer,

Congratulations on your fine new loudspeakers and thank you very much for choosing MAGNAT! You have made an excellent choice. The high-quality speakers produced by MAGNAT are renowned all over the world.

Please study the instructions and information below carefully before using your new loudspeakers.

GENERAL INFORMATION ABOUT CONNECTING YOUR MAGNAT MONITOR S LOUDSPEAKERS

Please always use a good quality loudspeaker connection cable from an audio dealer. To prevent impairment of sound quality, we recommend cables with cross-sections of at least 2.5mm^2 for lengths up to 3 m and at least 4mm^2 for lengths above 3 m.

Always turn off the amplifier or receiver before connecting or disconnecting loudspeaker cables. Place the loudspeakers in their planned positions and cut the cables to the right length. The cables for both channels should always be exactly the same length.

Strip 10 - 15mm of insulation from the ends of the cables. Twist the ends – this is much better than tinning them with solder – insert them in the terminals and tighten the terminal screws firmly.

For good sound it is imperative that the cables must be connected in such a way that the speakers are "in phase". This means that the black negative terminals on the speakers (-) must be connected to the negative (-) terminals on the amplifier, the red positive (+) speaker terminals to the positive (+) amplifier terminals. To make this easier one wire of most speaker cables is marked with a coloured strip or a ridge in the insulation.

Before switching on the system double-check all your connections and make sure that the terminal screws are tight and that there are no short circuits caused by stray wire filaments – this could cause serious damage to your amplifier!

THE MAGNAT MONITOR S LOUDSPEAKERS IN STEREO MODE

In the ideal configuration the speakers and the listening position should form an equilateral triangle. When the left and right speakers are the same distance from the listening position their sound arrives at the same time, resulting in a harmonious, natural music reproduction. (Fig. 1)

There should be a clear line of sight between the loudspeakers and the listening position. Any sound-absorbing or reflecting obstacles in the path will distort the sound. When you install the loudspeakers the following distances should be maintained:

MONITOR S floorstand loudspeakers: at least 20~cm away from the rear wall and at least 30~cm from the side walls. This will prevent excessive emphasis of the bass range.

MONITOR S shelf loudspeakers: shelf loudspeakers should also be as free-standing as possible, the distance to the sides and rear to walls and items should be at least 10cm , the tweeters should be located at ear height.

MAGNAT MONITOR S LOUDSPEAKERS AS A FRONT OR REAR LOUD-SPEAKER

The front loudspeakers are positioned at ear height on the left and right as equidistant from the television as possible. The rear loudspeakers are placed at ear height or a little above on the left and right besides or better behind the listening position. (Fig. 2a)

MONITOR S 30, S 10 D, S 10 B: if possible, the cross-over frequency for the front and rear channels should be adjusted to approximately 80Hz in the AV receiver's set-up. Otherwise all the recommendations made in the previous chapter also apply.

MAGNAT MONITOR S 14 C, S 12 C

The MONITOR S 14 C and S 12 C center speaker visually and acoustically ideally matches the other MONITOR S models. The loudspeaker is placed immediately on or under the television set. Otherwise please adhere to the general recommendations outlined in the previous chapters.

MAGNAT MONITOR S 10 D

The MAGNAT MONITOR S 10 D was specially developed for use as a rear speaker in home cinema systems. The special arrangement and wiring of the three tweeters offers a particularly spatial sound impression and can also be used as rear/effect speakers at a short listening distance.

The ideal position for the speakers is either to the side or to the right and left behind the listening position. The two speakers should be of equal distance from the listening position. The speakers should be positioned at ear level or slightly above, or mounted on the wall.

MAGNAT MONITOR S 10 B, S 10 D WALL MOUNTING

Both models are equipped with a simple wall-mounting device that allows the speaker to be hung on a wall-mounted screw. Fig. 4 provides information about the screw spacing and the screw dimensions.

Important information/safety instructions:

The customer is solely responsible for the use of wall brackets / speakers attachments.

The customer is also solely responsible for the secure attachment of the speaker bracket to the wall and the selection of suitable mounting material (e.g. screws, wall plugs, etc.), while taking account of the weight and construction of the speaker and the condition of the wall.

MAGNAT MONITOR S 10 B, S 10 D RUBBER FEET

The package includes four self-adhesive rubber feet per speaker, which should be glued to the underside of the housing when placed on a hard surface (e.g. shelf). When mounting on a wall, these can also be attached to the rear of the speaker in order to avoid resonance and ensure the necessary distance from the wall for laying the cable.

MAGNAT S 80 ATM

2.5-way bass reflex floorstanding speaker with integrated 2-way Dolby Atmos® module

About DOLBY ATMOS®: DOLBY ATMOS® is a new audio standard for cinemas and homecinemas.

Atmos brings a third dimension into the soundscape for the first time in the form of treble channels. The treble channels are emitted either by additional add-on loudspeakers or via add-on speakers integrated into the front and rear loudspeakers like the MONITOR S 80 ATM. For even distribution of the treble sound field that is not locatable for the human ear, the add-on loudspeakers emit their sound into the room in the direction of the ceiling. The reflection of this sound then reaches the listeners, giving the impression of a three-dimensional soundscape. The use of on-wall or in-wall ceiling loudspeakers is also possible as an alternative for emitting the treble channels. However, this involves considerably greater effort and expense in terms of installation and wiring.

Atmos-certified loudspeakers therefore represent a simple and practical possibility for expanding an existing multi-channel loudspeaker set to include Atmos channels. Please note that, for a true DOLBY ATMOS® experience, both the source material (e.g. Bluray) and the electronics (e.g. AV receiver) have to meet the DOLBY ATMOS® audio standard.

SETTING UP: The recommendations given in the previous sections generally apply to the positioning of the speakers. When used as a front speaker, the distance from the listening position should be at least 2.5 - 3m . The speakers should be directed slightly towards the listening position.

The MONITOR S 80 ATM can also be used as rear speakers (home cinema system with four Atmos height channels, 5.x.4 configuration). The height channel is then used as rear high. However, it should be ensured that the speakers can be set up clearly behind the listening position (distance at least 1 - 1.5m ). The distance between the two speakers should roughly correspond to the distance between the front speakers. A possible setup configuration is shown in Fig. 2b.

CONNECTING: The speaker has two connection terminals at the rear. The lower terminal is assigned to the main speaker, and the upper one to the treble speaker (Fig. 3).

Please note:

The protective cover of the treble speaker may only be removed for servicing purposes.

CONNECTING TO AN AV RECEIVER

Figs. 5 and 6 show two different methods of connecting to AV receivers.

Fig. 5: AV receiver without subwoofer output.

Fig. 6: AV receiver with subwoofer output.

HOW TO AVOID DAMAGE TO YOUR VALUABLE SPEAKERS

All MAGNAT loudspeakers are designed and built for optimum sound reproduction with the tone controls in the central position - i.e. with "linear" amplifier output. Turning up the bass and treble controls too far delivers more power to the woofers and/or tweeters, and at high volumes this can actually destroy the speaker units!

If the output of your amplifier is significantly higher than the rated power handling capacity of your speakers extremely high volumes can physically destroy your speakers. This doesn't actually happen often but you should be aware that it is possible.

Weak amplifiers with low output ratings can actually be more dangerous for your speakers at medium volumes because weak amplifiers may overload much faster than powerful ones and this causes measurable and audible distortion, which is extremely dangerous to your loudspeakers.

Always turn the volume down immediately as soon as you hear distortion! If you like listening to loud music make sure that your amplifier can deliver at least as much power as the speakers' power-handling rating.

Amplifiers, tuners and CD players can all produce inaudible high-frequency signals – and this doesn't only apply to cheap products. If your tweeters fail at low or medium volumes you should have a qualified technician check your system components for dangerous inaudible signals.

SPECIFICATIONS

MONITOR S 80 ATM

Main Speaker Top Speaker

Configuration:	2 1/2-way bass reflex	2-way coaxial
Powerhandling capacity:	160 / 300 W 40 / 80 W
Impedance:	4 Ω 4 Ω
Frequency response:	26 – 38 000 Hz 60 – 28 000 Hz
Recommended amplifier output:	30 – 300 W 15 – 80 W
Efficiency (2.8V/1 m):	90 dB 87 dB
Dimensions (WxHxD):	215 x 860 x 270 mm

MONITOR S 70 MONITOR S 30

Configuration: 3-way bass reflex 2-way bass reflex
Powerhandling capacity: 190 / 380 W 100 / 200 W
Impedance: 4 - 8 Ω 4 - 8 Ω
Frequency response: 19 - 38 000 Hz 34 - 38 000 Hz
Recommended amplifier output: 30 - 380 W 30 - 200 W
Efficiency (2.8V/1 m): 91 dB 90 dB
Dimensions (WxHxD): 215 x 960 x 310 mm		215 x 354 x 270 mm

MONITOR S 14 C Configuration: 2 1/2-way bass reflex Powerhandling capacity: 100 / 200 W 75 / 150 W Impedance: 4 - 8 Ω 4 - 8 Ω Frequency response: 38 - 38 000 Hz 40 - 32 000 Hz Recommended amplifier output: 30 - 200 W 20 - 150 W Efficiency (2.8V/1 m): 90 dB Dimensions (WxHxD): 700 x 150 x 190 mm

MONITOR S 12 C 2-way 420 x 148 x 190 mm

	MONITOR S 10 D	MONITOR S 10 B
Configuration: 2-way "dipole"	2-way
Powerhandling capacity: 60 / 120 W		60 / 120 W
Impedance: 4 - 8 Ω 4 - 8 Ω
Frequency response: 42 - 32 000 Hz 42 - 32 000 Hz
Recommended amplifier output: 20 - 120 W 20 - 120 W
Efficiency (2.8V/1 m): 88 dB 88 dB
Dimensions (WxHxD):	149 x 250 x 130 mm	149 x 250 x 190 mm
Accessory:	Rubber feet	Rubber feet

Subject to technical change.

Très cher client,

Main Speaker Top Speaker

Type: Enceinte bass reflex 2 voies coaxiales

à 2 1/2 voies

Puisssance nominale: 160/300W40/80W

Impedance: 4 Ohm 4 Ohm

Bande passante : 26 – 38 000 Hz 60 – 28 000 Hz

Puisance recommandee

Impedance: 4-8 Ohm 4-8 Ohm

Bande passante: 19-38000Hz 34-38000Hz

Puisance recommandee

Impedance: 4-8 Ohm 4-8 Ohm

Bandepassante:38-38000Hz40-32000Hz

Puisance recommende

Puisssance nominale:60/120W 60/120W

Impedance: 4-8 Ohm 4-8 Ohm

Bande passante: 42-32000Hz 42-32000Hz

Puisance recommende

Main Speaker Top Speaker

Configuratie:	2 1/2-weg basreflex	2-weg coaxial
Belasthaarheid:	160 / 300 W 40 / 80 W
Impedantie:	4 Ohm	4 Ohm
Frequentiebereik	26 – 38 000 Hz	60 – 28 000 Hz
Aanbevolen versterkervermögen:	30 – 300 W	15 – 80 W
Bruikbare gevoeligheid (2.8V/1m):	90 dB	87 dB
Afmetingen (BxHxD):	215 x 860 x 270 mm

MONITOR S 70 MONITOR S 30

Configuratie: 3-weg basreflex 2-weg basreflex

Belastbaarheid: 190 / 380 W 100 / 200 W

Impedantie: 4 - 8 Ohm 4 - 8 Ohm

Frequentiebereik 19 - 38 000 Hz 34 - 38 000 Hz

Aanbevolen versterkervermögen: 30 - 380 W 30 - 200 W

Bruikbare gevoeligheid (2.8V/1m): 91 dB 90 dB

Afmetingen (BxHxD): 215 x 960 x 310 mm 215 x 354 x 270 mm

MONITOR S 14 C Configuratie: 2 1/2-weg basreflex Belasthaarheid: 100 / 200 W 75 / 150 W Impedantie: 4 - 8 Ohm 4 - 8 Ohm Frequentiebereik 38 - 38 000 Hz 40 - 32 000 Hz Aanbevolen versterkervermogen: 30 - 200 W 20 - 150 W Bruikbare gevoeligheid (2.8V/1m): 90 dB 89 dB Afmetingen (BxHxD): 700 x 150 x 190 mm 420 x 148 x 190 mm

Main Speaker Top Speaker

Configurazione: bassreflex 212 vie 2 vie coassiale

Potenza max.: 160/300W40/80W

Impedenza: 4 Ohm 4 Ohm

Main Speaker Top Speaker

Main Speaker Top Speaker

MONITOR S HÖGTALARE I STEREODRIFT

Main Speaker Top Speaker

Konfiguration: 212 vags basreflex 2 vags koaxial

Max belastning: 160 / 300 W 40 / 80 W

Impedans: 4 Ohm 4 Ohm

Frekvensomrade: 26-38000Hz60-28000Hz

Rekommenderad forstarkareffekt: 30-300 W 15-80 W

Verkningsgrad (2.8V/1m): 90 dB 87 dB

Matt (BxHxD): 215 × 860 × 270 ~mm

MONITOR S 70 MONITOR S 30

Konfiguration: 3 vags basreflex 2 vags basreflex

Max belastning: 190 / 380 W 100 / 200 W

Impedans: 4-8 Ohm 4-8 Ohm

Frekvensomrade: 19 - 38 000 Hz 34 - 38 000 Hz

Pnc.6:AyDnO-BnDeo npneMHNc BbIXoDM ca6Bypepa

COBETbI NO NCKJIIOUeHnIO CNTyAUcN, TPEBvIOuNX PEMOHTA

Bce rpoMkoROBOpHTeIN MAGNAT hacTpoEhBa H aHnIyUwe BocIpOn3BeDeHne B yCNOBHX, KOrdapepyJrTOp yPOBHa HaxOHTcB CpeDHeM NIOXeHH, T.e. Ha IINHeHOM yAcTke pa6oTbI yCNIHTeMa MOuHOCtN. CyueCTBeHHoe NOBIIeHne yPOBHa PnIBODNT K ToMg, YTO B O6NaCTN Hn3Knx n/nn BepxHnx TOHO B bIDeJIeTcA N3bIOTOHa 3HePra, YTO npBn BbICOKO rPoMKoCTm MoKeT npNBecTN K NCKaKeHHIO 3ByaHna. EcIn B BaWeM pacnpjKeHHn HaxOHTcY CUNITeB, KOtOpBn OBnadaet cyueCTBeHHO BoJeE BBIOHO MOuHOCtBu, PpeBBIAuOe NACNOPHYo Harpy3OCHyO cNoC6HOCtB KOLOHok, TO TaKo Upe3MeRbI yPOBEHb rPoMKoCTm MoKeT npNBecTN K pa3pyeHHIO rPoMKoROBOpHTeN, YTO, BnPoYe, CnyaETcBA CeBMa peDKo. YCNlTeHN Co CnAbIM BbIXODOM, MOrTy, Ondako, PpeCTABJIbT bONACHOCTb dIy KOLOHOK yKe npCpeDHe CnIe 3BYKa, TAk KaONMOrYT OKa3aTbcRA nePERpyKeHHbIMn HamHoro 6bICTpee, Yem B Cnyae MOuHbIX yCNIHTeN. Taka nePERpy3ka obycnoBnBaEt OTeTTBO perNCtppyEmble np6opamn CblIMMbIe NCKaKeHHa, KpaIHe OnaChbIe DnBa WAsero rPoMKoROBOpHTeN. B CBa3n C 3TIm npocm Obpaatb BHIMAHne Ha NCKaKeHHa, BO3NkAIOUme npreYnnpOBaHHN 3Byka, I, npn HeOBxOUMOCTN, HemeIeHHO yMeHBsAtb erO yPOBeH. Tot, KTo IIO6HT cNyTaB, DOJXeH cIeDITb 3a TeM, YTObI yCNIHTeB kAK MOXHO pexe BbIaBaI TaKyIO MOUHOCtB, KOTOPa MOnEET pInBECTN K Nepepy3kAM B KOLOHKAX.

BOBcEM...

ycnnten, TIOhepbI n CD nneepbI - n He ToIbKO B cnyae HeOporHX n3deJn - MoryT BocnpoN3BOIDtB BOCpHnHaemble cnyxOM BlicOKOaCTOTNbIE KOJIe6aHn. Ecn npi MaIOM n CpeHem ypoBnX rPOMKoCTn y Bac nponaAoiT BlicOKne TOHa, to BaIy cnCTemy dONKeH npOBepnT bCneuaJIncT.

TEXHINUeCKNEXAPAKTEPNCNTIKN

MONITOR S 80 ATM

Main Speaker Top Speaker

KoHfIgpyaun: 2 1/2 noIochIbe "6acpePneKc" 2 noIochIbe Koakcnan

Harpy3ouha cnoc6hoctb: 160/300BT40/80BT

Immpeanu: 4OM 4OM

YacToTHbI dHaNa3OH: 26-38000Γu60-28000Γu

PekomeHdyemam MOuHocTb ycHnITeIa: 30-300 Bt 15-80 BT

Ko3Φ. nOe3HOrO dEInCTBn8 90 d6 87 d6

(2.8BoJbT/1M):

TgabnBtI (xxBxΓ): 215 x 860 x 270 MM

MONITOR S 70 MONITOR S 30

KoHpIpyaun: 3 noIOchbIe "6acpeΦJIeKc" 2 noIOchbIe "6acpeΦJIeKc"

Harpy3ouha cnocoboctb: 190/380 Bt 100/200 Bt

IImpeanu:4-8OM4-8OM

YactoTHbI dnaana3OH:19-38000Γu 34-38000Γu

PekomeHnyeMaMoHocTb ycnnte:30-380BT 30-200BT

Ko3Φ. nOe3HOrO dEiCTBnA 91 D6 90 d6

(2.8BoJbT/1M):

TgabnBtI (UxBxΓ): 215 x 960 x 310 MM 215 x 354 x 270 MM

MONITOR S 14 C

KoHfUrypaun: 2 1/2 noIocHbIe "6acpeFneKc" 2 noIocHbIe

Harpy3ouhagcnoc6nctb:100/200B775/150B

IImpeanu:4-8OM4-8OM

YactoTHbI dHaana3OH: 38-38000 F40-32000 F

PekomeHnyemam MOuHoctb ycnnteIa: 30-200 Bt 20-150 Bt

Ko3Φ. nOe3HOrO dEiCTBn8 90 d6 89 d6

(2.8BoJbT/1M):

700x150x190MM 420x148x190MM

MONITOR S 10 D

2 noJocHbIe

KoHfNpyaun: 2 noNochbIe ,DInnoB

Harpy3ouHa nocO6HocTb: 60/120 Bt 60/120Bt

IImpeanu:4-8OM4-8OM

YactoTHbI dHaana3OH:42-32000F42-32000F

Main Speaker Top Speaker

Main Speaker Top Speaker

Congratulations! You have made a wise selection in becoming the owner of a MAGNAT HiFi equipment. Due to high quality MAGNAT HiFi products have earned an excellent reputation through the western world. And this high quality standard enables us to grant a 5-years warranty for MAGNAT HiFi products.

The equipments are checked and tested continuously during the entire production process. In case you have problems with your MAGNAT HiFi equipment, kindly observe the following:

1. The guarantee period commences with the purchase of the component and is applicable only to the original owner.

2. During the guarantee period we will rectify any defects due to faulty material or workmanship by replacing or repairing the defective part at our discretion. Further claims, and in particular those for price reduction, cancellation of sale, compensation for damages or subsequent damages, are excluded. The guarantee period is not altered by the fact that we have carried out guarantee work.

3. Unauthorized tampering with the equipment will invalidate this guarantee.

4. Consult your authorized dealer first, if guarantee service is needed. Should it prove necessary to return the component to the factory, please insure that the component is packed in original factory packing in good condition • the quality control card has been filled out and enclosed with the component • your enclose your receipt as proof of purchase.

5. Excld from the guarantee are: Illuminates Wearing parts - Shipping damages, either readily apparent or concealed (claims for such damages must be lodged immediately with forwarding agent, the railway express office or post office). - Scatches in cases, metal components, front panels, etc. (You must notify your dealer directly of such defects within three days of purchase.) Defects caused by incorrect installation or connection, by operation errors (see operating instructions), by overloading or by external force. Equipments which have been repaired incorrectly or modified or where the case has been opened by persons other than us. Consequential damages to other equipments. Reimbursement of cools, without our prior consent, when repairing damages by third parties.

F

Toutes nos félicitations!

Name and address of the dealer/stamp

Käufer/Customer

Name/Name

Straße/Street

PLZ, Ort/City

Land/Country

Kaufdatum/buying date

No warranty without receipt!

Magnat