One+ RCK182B - Drill RYOBI - Free user manual and instructions

Technical Specifications	RYOBI One+ RCK182B cordless drill, powerful motor, adjustable torque, 18V lithium-ion battery.
Usage	Ideal for drilling in wood, metal, and plastic, with hammer function for harder materials.
Maintenance and Repair	Regularly check the battery condition, clean the chuck, and lubricate moving parts if necessary.
Safety	Wear safety glasses, use appropriate gloves, do not exceed the tool's capacity limits.
General Information	Compatible with the RYOBI One+ range, lightweight and ergonomic for prolonged comfort during use.

Frequently Asked Questions - One+ RCK182B RYOBI

How do I charge the battery of the RYOBI One+ RCK182B drill?

To charge the battery, insert it into the RYOBI One+ charger until the charging light turns on. Leave the battery to charge until the light indicates it is fully charged.

What type of drill bits can I use with the RYOBI One+ RCK182B drill?

The RYOBI One+ RCK182B drill is compatible with drill bits from 1 to 13 mm in diameter, suitable for wood, metal, and plastic.

How do I adjust the torque on the RYOBI One+ RCK182B drill?

Use the adjustment ring located just above the chuck to select the desired torque level. Turn the ring until the number corresponding to the desired torque aligns with the indicator.

What should I do if the drill does not start?

First, check if the battery is properly charged. If the battery is charged, ensure it is correctly inserted into the drill. If the problem persists, consult customer service.

How do I clean and maintain my RYOBI One+ RCK182B drill?

To clean your drill, unplug it and use a soft cloth to wipe the exterior. Avoid using abrasive products. Also regularly check the chuck and clean it if necessary.

What is the battery capacity of the RYOBI One+ RCK182B drill?

The RYOBI One+ RCK182B drill typically comes with an 18 V battery, allowing for many tasks before needing a recharge.

Can I use the RYOBI One+ RCK182B drill for outdoor work?

Yes, the RYOBI One+ RCK182B drill is designed for outdoor use, but make sure to protect it from weather and moisture.

What is the warranty on the RYOBI One+ RCK182B drill?

The RYOBI One+ RCK182B drill is generally covered by a 2-year warranty, but this may vary depending on the country and retailer. Check the specific warranty conditions.

USER MANUAL One+ RCK182B RYOBI

Safety, performance, and dependability have been given top priority in the design of your percussion drill.

INTENDED USE

The percussion drill is intended to be used only by adults who have read and understood the instructions and warnings in this manual and can be considered responsible for their actions.

The percussion drill can be used for drilling into various material including wood, metal and plastics using a drill bit which has a shank diameter of less than 13mm . It can also be used in hammer mode for drilling masonry and similar materials.

Do not use the percussion drill for any other purpose not described above.

WARNING

Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

PERCUSSION DRILL SAFETY WARNINGS

SAFETY INSTRUCTIONS FOR ALL OPERATIONS

Hold the power tool by insulated gripping surfaces, when performing an operation where the cutting accessory or fasteners may contact hidden wiring. Cutting accessory or fasteners contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock.

SAFETY INSTRUCTIONS WHEN USING LONG DRILL BITS

• Never operate at higher speed than the maximum speed rating of the drill bit. At higher speeds, the bit is likely to bend if allowed to rotate freely without contacting the workpiece, resulting in personal injury.
  Always start drilling at low speed and with the bit tip in contact with the workpiece. At higher speeds, the bit is likely to bend if allowed to rotate freely without contacting the workpiece, resulting in personal injury.
  Apply pressure only in direct line with the bit and do not apply excessive pressure. Bits can bend causing breakage or loss of control, resulting in personal injury.
• Ambient temperature range for tool during operation is between 0^ and 40^ .
• Ambient temperature range for tool storage is between 0^ and 40^ .

The recommended ambient temperature range for the charging system during charging is between 10^ and 38^ .

ADDITIONAL BATTERY SAFETY WARNINGS

WARNING

To reduce the risk of fire, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack or charger in fluid or allow a fluid to flow inside them. Corrosive or conductive flux as seawater, certain industrial chemicals, and bleach or bleach-containing products, etc., can cause a short circuit.

• Ambient temperature range for battery during use is between 0^ and 40^ .
• Ambient temperature range for battery storage is between 0^ and 20^ .

TRANSPORTING LITHIUM BATTERIES

Transport the battery in accordance with local and national provisions and regulations.

Follow all special requirements on packaging and labelling when transporting batteries by a third party. Ensure that no batteries can come in contact with other batteries or conductive materials while in transport by protecting exposed connectors with insulating, non-conductive caps or tape. Do not transport batteries that are cracked or leaking. Check with the forwarding company for further advice.

RESIDUAL RISKS

Even when the product is used as prescribed, it is still impossible to completely eliminate certain residual risk factors. The following hazards may arise and the operator should pay special attention to avoid the following:

Damage to hearing caused by noise

Wear suitable hearing protection and limit exposure.

Injury to the eyes
Wear protective eye shields or goggles when using the product.
Injury caused by vibration
-Limit exposure. Follow the instructions in Risk Reduction.

Electric shock caused by contact with hidden wires
-Hold the product only by insulated surfaces.
Injury caused by dust
-Dust created by operating the product can cause respiratory injury. Wear appropriate dust

control

mask with filters suitable for protecting against particles from the material being worked on.

RISK REDUCTION

It has been reported that vibrations from handheld tools may contribute to a condition called Raynaud's Syndrome in certain individuals. Symptoms may include tingling, numbness and blanching of the fingers, usually apparent upon exposure to cold. Hereditary factors, exposure to cold and dampness, diet, smoking and work practices are all thought to contribute to the development of these symptoms. There are measures that can be taken by the operator to possibly reduce the effects of vibration:

• Keep your body warm in cold weather. When operating the unit wear gloves to keep the hands and wrists warm. It is reported that cold weather is a major factor contributing to Raynaud's Syndrome.
  After each period of operation, exercise to increase blood circulation.
  Take frequent work breaks. Limit the amount of exposure per day.

If you experience any of the symptoms of this condition, immediately discontinue use and see your doctor about these symptoms.

WARNING

Injuries may be caused, or aggravated, by use of a tool. When using any tool for prolonged periods, ensure you take regular breaks.

KNOW YOUR PRODUCT

See page 81.

1. Gear selector
2. Quick mode selector
3. Torque adjustment ring
4. Keyless chuck
5. Direction of rotation selector
6. Variable speed switch trigger
7. LED light
8. Bit storage
9. Screw driver bit
10. Battery port
11. Handle, insulated gripping surface

MAINTENANCE

WARNING

The product should never be connected to a power supply when you are assembling parts, making adj cleaning, performing maintenance, or when the product is not in use. Disconnecting the product will prevent accidental starting that could cause serious injury.

• When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage.
• Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt and carbon dust.
• Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc., come in contact with plastic parts. They contain chemicals that can damage, weaken or destroy plastic.
  Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust. If operation is dusty, also wear a dust mask.
  For greater safety and reliability, all repairs should be performed by an authorised service centre.

LUBRICATION

All of the bearings in the product are lubricated with a sufficient amount of high grade lubricant for the life span of the product under normal operating conditions. Therefore, no further lubrication is required.

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing of as waste. The machine, accessories and packaging should be sorted for environmental-friendly recycling.

SYMBOLS

Safety alert

CE conformity

V Volts

Direct current

min-1

Revolutions or reciprocations per minute

Chuck capacity

No-load speed

EurAsian Conformity Mark

2 | English

Please read the instructions carefully before starting the machine.

CAUTION

Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.

Ukrainian mark of conformity

CAUTION

(Without Safety Alert Symbol) Indicates a situation that may result in property damage.

Drilling without impact

Screwdriving

Percussion drill

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice.

SYMBOLS IN THIS MANUAL

Note

Warning

Parts or accessories sold separately

Torque, maximum

Torque, minimum

Speed, minimum

Speed, maximum

The following signal words and meanings are intended to explain the levels of risk associated with this product:

DANGER

Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury.

WARNING

Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.

REDUCTION DES RISQUES

APPRENEZ A CONNAITRE VOTRE PRODUIT

Voir la page 81.

MACHEN SIE SICH MIT IHREM PRODUKT VERTRAUT

SieheSeite81.

VEILIGHEIDSWAARSCHUWINGEN KLOPBOORMACHINE

ALGEMENE VEILIGHEIDSVOORSCHRIFTEN

BUCNE COPNKOCHOBEHNA C O6pa6aTbIBaEMO H TaIbIO. Ha 6oJee BbICOKNX CKOPoCTX npN CBO6OHNOM BpAueHn CBepNa 6e3 COPNKOCHOBEHNA C O6pa6aTbIAEMO IeTaIbIO NOBbIaETCBepoTHOCTb NCKPUBHeHNA CBepNa I NOyUeHNA TpaBMbl.

Hakim DoJxeh OcyuectBjAytbc8 Ctporo nepneHkyIpyHO ocN cbepna n6e3 n3nHero ycnn.Bo3MOXHO NCKPNBHeHne cbepna, KOtOpoe MOKeT npNBecTN Kero nONOMKe NnN NOtepe KOHTpOJI HAd INHCTpyMeHTOM N, KAK CNeDCTBVE, TpaBME.
TeMnepaTpyoOkpykaUoei CpeblI JIJI 3KcNpyatauHn By, HCTpyMeHTa DoJXHa 6bITb B Dnana3OHe ot 0^ do 40^
TemnepaTypa OkpykaUoSe CpeBdI Dnla XpaHEnn HnctpyMeHa DoJnxHa 6bItb B Dnana3OHe ot 0^ do 40^
PekomeHnyemay TemnepaTypa OkpykaUoce CpeblI dIy 3apAHorO yCTpOJCTBa B npouecce 3apAKn DOJXHa 6bITb B Dnana3OHe MExdy 10^ n 38^

CTOPOXHO

Ipoptyte BCE yka3aHnna, HNCTpyKcHn, INNHOCTpaCnN n CneuΦnKaaCnN, NOCTaBnEMeB C 3TNM 3NeKTPOUHCTpyMeHTOM. HecobJIOHeHn BCex IHCTpyKcHn, Yka3aHHbIX HnKe, MOKET pINBeCTn K IopaxeHHo 3JIeKTPnueCKmTOKOM, NOKApy n cepbe3HbIM TpaBMam.

CoxpaHnte Bce npdeynpeXdEHHCTpyKcnn daIbHeIeero nCnOJIb3OBAHn.

TPEBOAHNA B3OJACHOCTN IPNI NCIOJIb3OBAHUN YDAPHON DPEJIN

YKA3AHNIO B3ONACHOCTN JIABCEX ONEPAU

TPE6OBAHNA BE30NACHOCTN IPI NCMONb3OBAHN DONOHNTEHBOAKKMYJATOPHO BATAPEI

TOPOXHO

IpynpoTbpaueHnOnaCHOINnoXaparBpe3yblTaTe /KpIKORO 3AmbKaHnur, TpaBM n NOBpeXeHn u3deJnHe OnyckaTe HNCTPymeHT, CmEHhN aKKMyJrTO pUIn 3apdHoe yctpoCTBO B KNDKcOTn He DonyckaTe nonadHn JxNkOCTe BHyTpby cTPOYCTB INn KymyJrTOpOB. Koppo3NoHHbE n npobodJnne XNDKcOTn, TaKne KaK coJeHbI pactBOp, ONpeDeJeHHbIe XMMKATbI, Ot6eJIbAIOUne CpeDCTBa NnI codepkaune INx PpOdyKTbI, MOrTy NpNBecTn K KOPOTKOMy 3AmbKaHnIO.

TemnepaTpa OkpykaUeI cpebl IJRA KcNpyataunn aKKMyJrTopa DoJIXHa 6bITB Dnana3OHe ot 0^ do 40^

B npocece BbInOpHeHn Oepaun, pni TemnepaTpa OkpykaIOue Cpebl Iy XpaHeHn KOtOpbIX pexuay DeTaN bnn CoedHnTeNbHbIe aKKymJrTopa DOJXHa 6bItb B DnaJanaOHe OT 0^ do 3JIeMeHTb MoYr 3aTeB cKpbITbIe npoBoa, 20°C. ydepxHBaIe HNCTpyMeHT 3a N3OJINPOBaHNHy 3axBaTHyIO nobepxHoCTb. Pexuay DeTaN bnn TPAHCNOPTUPOBKA JINTNEBBix BATAPEI COeHNHTbIe 3JIeMeHTb npu ConpIKoCHOBHm C npoBODko IOd HapJKeHnEM MOrT NOlyNT PaHCnOpTpuyte aKKymJrTopHy 6bTaapeo B 3JIeKtpueckn 3apRn IN npuHHITb OepaTopy COOTBETCTBn C MeCTHbIMN I rocydapCTBeHHbIMN 3JIeKTPoTpaBMy. npabNJamN nNoLOXeHnMn.

INPABNIA TEXHNI B3OINACHOCTN INCIOJIb- 3OBAHIN CBEPI

Pa6ooya ckopoctb He doJxHa npeBbIwaTb MaKcMaJIbHbI Hndekc ckopoctn CbePna. Ha 60nee BbICOKnx CKOpOCTx npn CBO6OHNOM BpaUeHn CBepNa 6e3 cOnpIKOCHOBEHn C o6paBaIbAeMoI DeTaIbIO NOBbIaETCB EpoarTHOCTb NCKPNBHeHn CBepNa I noLyEHN TpaBMbl.
Bcerda hauHnHaTe CBePnTb Ha Hn3Ko ckopoocTn,

Pn TpaHcnpTIpOBKe 6aTape TpeTbe CTOPOHO co6JIOdaIte BCE CNEUaJIbHbIe Tpe6oBaHn IIO yNAKOBKe n MapKnipOBKe. PpOBepBe, YTo6bl aKKyMylTopHbIe 6aTapEn He BCTynaIN B KOHTAKT C DpyrIMN 6aTapeA MIn NpOBOIMMbIM MaTePnaIaAMn Ppi TpaHCnpTIpOBKe, dIra 3TOrO 3aUNITte ORoENHHbIe pa3bEmbl IN30JIAuNei, IN3OJIpyUQUMN KONNaYkAmn INn JENTAMn. He nepenocnte 6aTapEn C NOBpeXdEHNRAm INn yTEykAMn. 3a DaJIbHeINMMN KOHCyJIbTaUzMAm N6paTntEcB B TpaHCnpTHO-3KcneDIIuONHHyO KOMNaHnIO.

OCTATOUHbIE PNCKN

JaKe KOrda N3deJIne NcNoIb3yIOT CornacHO HNCTpyKUaM, HeBO3MOxHNO NOnHOCTbO yCTpaHNTb PaKTOpbl PuCKa CNeDyIOUne ONaCHOCTu MOrTy BO3HNKHyTb Bo BpeMaERO NcNoIb3OBaHnI, I BO N36ExKaHne IX pa6oHm D o6paTb OcO6oe BHIMAHHe Ha CJeDyIoUee:

Hapyuene Cnyxa BCNEcTBne yMOBOrO BO3NeICTBnA

-ncnoIb3yIte noxOJaUe cpeCTBO 3aunTbI opraHOB cnya.

NobpeckdneHn rna3

-Bcerda Hocnte 3aunTHbIe OcKn npn yctpoNCTBOM.

TpaMbbl, Bb3bBaemble Bn6paunei

-OrpaHnUbaIte BO3eJeCTBne. CJeNyIte HNCTpyKlIbM B pa3deNe «CHnxKeHne pncKa>.

IopajKeHne 3NeKTpNueCKM TOKOM npn COpNKOCHOBeHN COCKpbITbIMN IpOBOdAMN

-DepKInTe n3dJIe ToJbKO 3a N3OJIINPOBaHHbIe NOBepXHOCTN.

TpaMbbl, Bbl3bIbAembie nbIbnBIO

Пьл,обрауюаясьВВрмэкпnyataци
N3дел，在MOжET npNBecNTK NOBPexKeHIO
opraHOB dIbIXAH.NcnoJIb3yIte HaJIeXaUyO
Nblne3aUNTHYUM Macky CФИЛТpAMN,
3aIuHaIOUIMM OT pOHHKHOBEHЯ qAcTNU
6pa6aTaIBaEMOro MaTePnAna.

CHNXEHME PNUCKA

Coobauocb,TOBn6paunpyhbx3neKTPONHCTpymeHTOB yOTdIbHbIX NUC MOKET CNOOC6TBBOBaTb COCTOHNIO, KOTOpoe Ha3bIbaeTCR CNHPOM PeHNO.K CmTTOMAM MOrYr OTHOCHTBCR NOKaIbIbAHHe, OHMeHNe I NO6eJIHNE naIbueB (kak npn nepeoxnaJxdeHN).CHTAOT, HacJeDCTBeHHbIe 4akTopbl, OxJaXDeHne IN BnAKe Deta, KypeHne n PpAKTNueckn ONbl TcNOc6CTBYOT pa3BNTIO 3tN X CmNTOMOB. Hxke npuBOaTcR KOToPbIE MoKET pInHrTb OepaTOp dIra CHNKeHn BO3deCTBnB6paun:

OeBaITeB Tennee B xoJIoHyIO norOy. Ppi paBoTe C yCTpoiCTBOM NOJIb3yIteB nepuAtkAmn, YTO6bl pyKn I 3aIacTb8 6bln B TeNne. CHTaETc8, YTO XoJIoHna IoroJa ABJraTc8 OCHOBbIM PaKTOpOM, cnocobCTByIOUIM BO3HNIKHOBeHIO 60Je3H PeHo (Raynaud's Syndrome).
Iocne kaxdo 3ana pa6oTb BblnoHnTe ynpxHeHn nn ycnene H KpOBO6paueHn.
Yaue denaTe nepepbBbI B pa6ote. Cokpatnte DnNTeNbHOCTb exKeHHeBHOro npe6bHaHna Ha OTKpblOM BO3dyxe.

Pn noBHeHn KaKx-Ni6o n3 yKa3aHHbIX CmNTOMOB cpa3y Je npekpatnte pa60Ty n 6paTneCb NO nx nobOy K BpaCy.

CTOPOXHO

PpOOnJXnTeJIbHoe NcONJb3OBaHne NHCTpyMeHTa 6e3 nepepbIbMaOKeT npNBecTu K TpaBMam. PpN IcNoJIb3OBaHmN HcTpMyeHTA B TeueHne DnITeJIbHO RpeMeHN DeaIte peyIrpHbIe nepepbIBbl.

N3yUHTEN3DENNE

Ctp 81.

1. IpeeknouateJIb nepeea
2. NpeeknouateBbicpTO BbIbopa pexHMOB
3. KolbuO peryu npOBKN KpyTuaero MOMeHTa 4. 6eckJIIOUeBOI naTPOH
4. IpeeknouateIb HanpaBJeHb BpaueHn
5. Khonka zanycka c perynipobko knkopoctn
   7.Инданкатор
6. XpaHnIe 6ypa
   9.HacaKdIyOTBeptKn
7. THe3do noIokJIIOUeHn6aTapeN
8. Puyka, n30I npOBaHHa NOBepxHOCTb 3axBaTa

TEXHNUECKOE O6CJNYKUBAHNE

CTOPOXHO

Pn6bOp HN B KOem cnyae He DoJnxH NOcOeHNrTbcK NCTOCHNYI NTaHMy, KOrDa Bbl pa3bnpaeteKOMNOHEHTbl, BblONHReTe peryINpOBky, OunchKy, npBOoNTe TEXHueeCKoe 06cLnyxuBaHne, IIn KOrda np6bOp He nCNoB3yETc. OTcoeUHeHne np6bopaN03BOJNT 3aunITb INCTpyMeH TcnyauHoro 3anycka, YpeBaTOrO cepbe3HbIMn fN3uYeCKMm TpaBMamn.

eroEL

Pn npoBeHm Tekyuero pemOnTa nCnoJb3ynt ToIbKO nDeHTNHyIbe 3aNCACTn. NcNoJIb3OBAHne TO dpyrnx 3aNacteM MoKeT npEcdTabIaTb ONaCHOCTb STb,nn NOBpeNTb I3dJIInA.
I36eraTe nCNoB3OBAHnpaCTBOpTene BO BpeM qNCTKN PnactMaCCOBbIX qacteM. MHOne PnactMaCCbl yBCTNBbHbIK BO3DeiCTBnIO pa3NIuHbIX 6bIOBbIX pactBopnteNe N B pe3yNbTaTe NX IcNOB3OBAHn MOrY pa3pyWHTbcR.C NOMOUsBO YnCToN TkaHN ydaJIte rPra3bN yrOlbHyIO nbIb.
HnKOrda He DOnyckaIte KOHTaT TopMo3HOJ KnDKoCTN,6eH3Nu, PPOyKTOB Ha HeOToH OCHOB, PpONlTOUHoro Macna n T. d. C NJaCTMaCCOBbIMu Yactm. 3TH XMMKaTb COepkAT BeuecTba, KOTOpbie MOrYt NcNoPTnTb,OCNa6nTb nn pa3pyWntb PnactMacy.
Bcerda HadeBaTe npedoxpaHnteIbHbIe nn 3aunTHbIe OOKC 60KOBbIMn 3auTHbIMn EkapHaMn npaBoTe C daHHbIM nHCTpyMeHTOM nIN CdyBaHN nbJIn. Ecnn BO Bpem pa6oTbI o6pa3yETc MHorO nbJIn, TAKKe HadeBaTe Nblne3aunTHyIO Macky.
Дя 60Льш经 6e3oNaChOCTn n HAdexHocTN BCE peMOHTbIe pa6Obl DOnJXHbl npOBODTbcR

aBTOpN3OBaHHbIM CepBnCHbIM LHeHTpOM.

CMA3KA

Bce noDunHnKn B n3DeNn Cma3aHbI DOCTaTOHyBM KOINHECTBOM BBICOKOCOPTHOH CMA3KN DnI npoONKNTeHbHO 3KcNpyatauIN N3DeJINB HOpMaNBbIX pa6OuNX yCNOBnX. P03TOMy dONOnHTenbHaR Cma3Ka He Tpe6yetc.

3AUNTA OKPYXAIOUCEI CPEbl

YtJIN3npyIe KaK cbIpbe, a He BbIbpaCbBaIte KaK Mycop. MaunHa, akCEccyapbl n ynaKOBka DOJIKNHb 6bITb OTCOpTnPOBaHbI.

YCJIOBHBIE OBO3HAUHIN

CnHnONaCHOCTN

COOTBETCTBnTpeboaHnM CE

VBoNT

IOCTOHHHbI TOK

min-1

O6opoTOB HIN BO3BpaTHO- NOCTyNaTeNbHbIX DnBHXeHN B MmHyTy

Han60nbun dnaMeTp cBepna B natapohe

Ckopoocb6e3Harpy3kn

3HaK EBypa3NcKO CoOTBeTCTBnA

Ipeed nCnoB3OBAHnEm npi6opa BHIMATEbHO O3HaKOMbTEcB C DaHHo HNCTpyknei.

YkpanHckn 3nak CTaHdapTn3aun

001

OB03HAUENB BYKOBODCTBE

PpmeaHne

OctopoxHO

TnnpHaNEXKHO npno6petaembe OTeJbHO

MaKcImaJIbHbI KpyTЯUIM MOMENT

KpyTAnMOMeHT, MInHMaJIbHbI pa3mep

CKOPOCTb, MHHMamlbHaa

CKopoctb, MaKcImaHbHa

CneIyIOUe CNHaJIbHbIe CNOBa 3HaueHnnpEHa3HaueHbI, YTO6bI O6bYCHNTb yPOBHN pNCKaCBraHHOrO C3TNM N3JeJIeM.

ONACHO

Yka3bIbaeT Ha noTeHuaJIbHO ONaChyO CuTyauNIO, KOtOpa, ecn ee He n36ExaTb, npBeTeK JetaJbHomy NCxOdy nIIN cepbe3HO TpaBMe.

OCTOPOKHO

Yka3bIbaet Ha noteHuaNbHO onaChyIO cITyaUIO, KOtOpaa,ecnne ee He n36ExaTb,MOKeT pInBecTeKJIeTaHbOMHy NcXOdy nn cepBe3HO TpaBMe.

BHIMAHNE

Yka3bIbaeHaNoTeHnuaJIbHOOnaChyIO CITyaUIO, KOtOpaR,ecNn ee He N36ExaTb,MOKET npVBecTN K TpaBMeJeKoNNCpeDHeTJXeCTN.

BHIMMAHNE

(Be3 CmBbona TpeBorN Be3onacHocTn) Yka3bIbaet cnTyauuIO, KOTOPa MOKeT KOHaTbCra NOBpeXdeHneM CO6CTBeHHoCTn.

TpaHcnpoTpOBka:

Kateropnueckn He donyckaetra naeHne n lio6bIeCpok cnky6bln3denncoCTabJIaT 5 net.

MEXAHNueeCKne BO3DcNCTBnHa yNaKOBky npN

TpaHcnpTnpoBKe.

Ppi pa3py3ke/norpy3ke He donnyckaetc nCnoB30BaHne IIO6Oro BnDa TexHnKn, pa6oTaIooJIe No npHHuNy 3aXnMa ynaKOBKn.

XpaHeHHe:

HeoXoDIMO XpaHntB C yXOM MeTe.

Heo6xoDIMO XpaHnTb BdAaNOT NCTOCHNKOB NOBblIeHHbIX TEMnepaTp np BO3DeIeCTBna COJIHeuHbIX Iyuei.

Ipn xpaHEnn Heo6xoDIMO n36eRaTb pe3KOro nepenada TeMnepeatyp.

XpaHHeHbe3 ynaKOBKn He dOnyckaetc.

Data n3rOToBnHeHn (KoI DaTbI) OTWtAMnOBaH NOBepxHOCTN KOpnyCa n3dEJIIN.

Pnmep:

W17 Y2015, rnde Y2015 - roj n3roTOBJeHn

W17-HeIeIa n3rOToBJIeHnIa

OnpeJntb Mecau N3ROTOBHeHnM OMOHO corNaCHO npueHHo Hxke Ta6nue,Ha npimepe 2015 roda.

06paTHe BHNMaHHe! KOnIueCTBO HeJeB B MeCrae pa3NuaeTcA O T rOda B rOd.

m = 311

VISU DARBU VEIKSMU SAUGOS INSTRUKCIJOS

Dirbdami darbus, kuriu metu grezimo antgalis arba tvirtinimo detale galetu prisiliesti prie pasl i laidu, laiky kite elektrinj jrankj tik uz izoliu pavirsiu. Grezimo antgaliui arba tvirtinimo detalems prisilietus prie "gyvo" laido, neizoliuotos metalino elektrinio jrankio dalys gali sukelti elektros s nutrenkti operatoriu.

SAUGOS TAISYKLES NAUDOJANT ILGUS GRAZTUS

Niekada nevirskykite graztui numatyto maksimalaus greicio vertes. Esant didesnems greicio vertems, laisvai besisukantis, ruosinio nelieciantis graztas gali sulinkti ir jus suzialoti.
Visada pradekite grezti mazu greciu, graztto galu liesdami ruosinj. Esant didesnems greicio vertems, lainsvai besisukantis, ruosinio nelieciantis graztas gali sulinkti ir jus suzialoti.
Greztuva spauskite tik tiesia linja, isilgai grazto, ir nespauskite per stipriai. Graztai gali sulinkti ir luztti, arba galima nesuvaldyti jrankio ir susizaloti.
Irankio darbinés aplinkos temperatūros diapazonas nuo 0^ iki 40^ .
Irankio sandeliavimo aplinkos temperaturos diapazonas nuo 0^ iki 40^ .

Rekomenduojamas jkrovimo sistemas darbinés aplinkos temperaturos diapazonas nuo 10^ iki 38^ .

PAPILDOMI AKUMULIATORIAUS SAUGOS [SPÉJIMAI]

ame

buti

APÉJIMAS

DONbJIHNTeJIHN PDEyIPEJXDEHn3A BE3OJNACHOCT 3A BATEPNYTA

REyIpyEKeXDEHME

3a da n36eHHeTe onachocT Ta OT noXkap, npedn3BnKaHa
OT KbCO CbeDInHeHne, KaKTo N HapaHbAHHaTa N
NoBpeDInTe Ha npOdyKTa, He NotanJaTe IHCTpyMeHTa,
CmehemaT akyMylatopHa 6atepna NIN 3apdHOTO
yCTpoiCTBO B TeuHOCTn I ce NorpnjKeTe B ypeDInTe
N akyMylatopHnte 6atepnu Da He nonaDaT
TeuHOCTn. TeuHOCTte, PpeDn3BnKBaun Kopo3n NIN
PPOBeJdaun eJeKtpnueCTBO, KaTO CoNEHa BOda,
ONpeDeJIeHN XIMUKaUN, n36eJIbaUN BeUeCTBa NIN
PpOdyKTn, CbIbPxJaUN n36eJIbaUN BeUeCTBA, MoRAT
Da npPeDn3BnKAT KbCO CbeDInHeHne.

IiHa3oHbT Ha OKJHaTa TemepaTypa npn 3nON3BaHe Ha 6aTepeyTa e Mekdy 0^ n 40^
Iinaa30HbT Ha OKJHaTa Tempeatypa npn cbxpaHeHne Ha 6atepnaTa e MeKny 0^ n 20^

TPAHCIOPTIPOAHE HA JINTUEBN BATEPIM Da

TpaHcnpToPpAte 6aTepeNTe B CbOTBeTCTBNE C MeCTHnTe

OraT Da Cn3BaHTe BCNUKn CneuuaHn N3NCKBaHn 3a NaKeTnpaHe N eTNKeTnpaHe, KOrTo TpaHcNopTpate BaTePN Ype3 Tpeto IInue. YBepeTe Ce, Ye BApTe NTe He BIn3at B KoHTaKT C npTuN BApTe INI NpOBODIM MaTePauIN NO BpeMe Ha TpaHcNopTpapHe, KaTo NpeDnaNTe OTkpNTte KoHEKTopn C n3OJaNA, HEnPoBOdIMN KAnaHeta ININ NeHTa. He TpaHcNopTpaiTe BApTeIN, KOtTO Ca CnyKaHN ININ TEkAT. CbBpxTe Ce Cbc CneHaT a KomNaHn 3a DOJIbHITeJeH CbBET.

HENPREBVDENPCKOBE

Iopn Korato npOyKtBt Ce n3noJ3Ba no npEHa3HaueHne, e HeBb3MOxHO HanbJHo Da ce orpaHnBu BnOnpeJeHn pNCKOBn paKTopn. Morat da Bb3CneHNTE OnaCHOCTn n OepaTOpBt Tp8Ba daOC6eHO BHImaHne, 3a da n36erHe:

Ybpejdahe Ha cnya B cneCTBne Ha n3nahe Ha Wym.

-HocTe aHTnfoHn n orpaHueTe n3JaTaHaTeO.

HapaHraBaHe Ha OuTe

-Hocete Macka 3a npedna3BaHe Ha OHTe npedna3Hn OUnHa, KORATO n3non3BATE npodykTa.

HapaHaBaHe, npuHHeHO O TBbpaun.

-OrpaHueTe n3naraHTo. CneDbaIe yka3aHnraTa B, HamajBaHe Ha pncA".

ToKOB yIap cIeI KOHTaKT CbC cKpTN Ka6JIi

-ДрькTe npOуКТa Camo 3a n3OINpaHnTe NOBbpxHOCTN.

HapaHbAHn, npuHHeHn ot npax

-Прахьт, reнериран пп работа с пpoукта, можда пчинп респиралго урждaine. Мackа 3a КОНТРОЛИРане Ha npaxa C Фntprn, когTO може д BA Bn прдпзOT пax OT MaTePnAJa, Вьрху когTO pa6OTITE.

HAMAJRAHE HA PNCKA

N3BecTHo e, ye Bn6paunTe, npOn3BeJdAnH OTHCTpyMeHT MoKe Da npEn3BnKAT y HrkON 3a60JIbaHe, HapeHo CnHIpom Ha PeiHOJ (Raynaud's Syndrome). CmITOMITE MoKE Da BkIOUbAT n3TpbnBaHe, CXBaUaHe N36NeHNBAHe Ha npbCTnte, o6NKce 3a6eJIa3Bat npn n3IarAhe Ha CTyD. CMrTa HacJeCTBeHInTe pakTopu, n3IarAHeto Ha CTyD n BNara, dIeNTte, nyuHETO n HrkON pa6OTHn HabuN DoOpHAcRt 3a pa3BnHTeTo Ha Te3n CmIMTOMM. Morat da CE B3emAT HrkON MEPKn, KOINTo MORAT da CE npEepnEmat OT onepaTopa, 3a da CE Hamanr T epeKTnte OT Bn6paunnte:

IpoIbpaKeTe TeneChata TemnepaTpya B cTydeHO BpeMe. Korato 6opABte C nHcTpymeHTa, HocetepbKaBUN3a Da IIOIbpxkate pbcTe N KNTKN TOII.N CnopeN uCneDBAHn rnaBnrt PakTo DOnpHaacu 3a pa3BntNeTo Ha Raynaud's Syndrome, e CTyDEHO BpeMe.
Ppabete ynpaxHeHna 3a akTNBn3npaHc KpbBoo6paueHneTO CneD BCEKn pa6oTe HcKbI.
PeIOBHO H3nH3aIe B NOuVBka. OpaHueTe H3naHrTo Ha Bn6paun Ha DeH.

Pn noBa Ha hKoON CTcMNTOMtHe HToBa 3a60JbAHe, He3a6abHo npekpatete ynoTpe6ata Ha HnCTpyMeHTa nocetete nekap.

A PEPDyPPEXDEHNE

IpoDJIbIKHTeHOTIO H3NOJ3BaHE Ha HNCTpyMeHTaMOKe Hn Da IIOBede Do HapaHBAHNA JIN BJO

Pn H3non3BaHe Ha HcTpyMeHtA 3a npOdbJxNtEnHn

ONO3HAITEBAWINIPOJKT

Bx. cTpaHnua 81.

1. BytoH 3a n36op Ha npedakkata
   2.Бутонзиборнбьрз ржIM

8nPbCTeH 3a peryInpaHe Ha BbptraMOMeHT

1. Be3KnIOyOBa ZaHa
2. Bytoh 3a n36op Ha noCOKATA Ha BbptHe
3. Cnycbk C npomeHnBa ckopoCT
4. LED CBETJINH
   8.CbXpaHHeHnHa HauKpaHnUHTe
5. HakpaHnik 3a OTBepTka
6. THe3do 3a 6aTepeyra
   11.Pbkoxbatka, n30Jnpana noBbpxHOCT 3a3axBaune

IODPbJXKA

Hocere

A PEPdUnPExKdHne

IpoDyKTbT He Tp8Ba HnKora Da ce BKnIOyBa B 3axpaHbaHe, Korato CrNo6BaTe Yactn, npaBnte HaCTPOkN, NoYnCTBaTe, N3BbPwBaTe NOdPbXka IIN Korato He ro n3noJ3BaTe. N3KnIOyBaHeto Ha IpoDyKTa OT 3axpaHbaHeto Ue npedOTbPaTn CnyauHo
TnpeHe, KOeTo 6n MOrNo Da npuHn Cepno3Hn
TR
E
epno3HN

HIOI pno peMOHT n3nOJI3BaIte cAmo IeHTnUHn pe3epBHN ce, qAtn. 13non3BaHeTo Ha npyn yactn MOKe Da BN NOCTaB B ONaCHOCT NIN Da nobpeDn npOdyKta.

136raBATEH3NOI3BAHETOHa pa3TBOpHTeIN npn NOHCtBaHETO Ha NlactMacOBITE qactN. NoBeeTo IAACTMACn Ca YyBCTBEJIHN KbMa pa3JNUHn BINOBE pa3TBOPHTeIN MoKe Da ce NOBpeJr PtN 3NOI3BaHTo HA TAKIna. H3NOI3BaTe YnCTN KbpNn 3aOTcPaHbAHe Ha 3AmBpcBaHn IN BbIpeODeH.
B HnKaBcnyaH He No3BoJBaTe NactMacOBte
YACTN Da BnI3AT B KOHTaK TcBc CnnpaHn TeyHOCTN,
HePTeHN npOdyKTn, npOHnKBaUu Macna n T.H. Te
CbIbPxkAT XmMueckn BeueCTBa, KOnTO MoRat da
NoBpeJrT,OTcNa6rTnn Pa3pyuWt NactMacata.
Bunharu Hocete npedna3Ha macka nn ouina cbc CTpaHnHn ekpaHn, KORATO 6opabnte C mexaHn3npaHn INCTpyMeHTN nnn n3dyXbaTe npax. Ako npn pa6oTaTa ce OTdJI npax, n3non3BaIte n Macka 3a npedna3BaHe ot Hero.
3a no-roJMa 6e3onacHocT n HAdexKdHocT BCnUKN peMOHTn Tp8Ba da ce N3BbPWBat OT OToPn3npaH cepBn3.

EN

FR

aBaHe.

B

II

NL

PT

DA

SV

月

NO

RU

PL

CS

HU

RO

LV

LT

ET

HR

SL

SK

BG

UK

CMA3BAHE

Bcnu nape np BTo3n npOdyk3a Cma3aHn CdoCTaTbH O KOINueCTBO BNCOKOKaueCTBeHO MacNo, KoETo Tp6Ba Da cTNHe 3a ZeINr EKCNIOataUHOHe XNBOT Ha INCTpyMeHTa npn HopMaJIHn pa60THyCJIOBn. 3aTOBa He e HEOxOIMo DOnbIHNTeHNO CMA3BaHe.

EneKtpueckte ypei He Tp6Ba da ce n3xBbpT 3aeHNO c BHTOBITE OTnabu. PeukknpaTe, KbTeO mAbB3MOXHOCT. Obphete ce 3a CbBET NO peukknpaHTo KbM MecTHnte Blaactn IIN pa3npocTpahnteIte.

ONA3BAHE HA OKOJIHATA CPEDA

PeuKlnpaHe Ha CypOBHn, BMeTo 3a o6e3bpexkdahe KaTO OTNaDbK. MaunHata, dONbJIHNTEIHNTE npncnocO6JeHn n ONAKOKBITE Tpr6Ba Da 6bDat NOJNOKeHn Ha noXoJaI npepa6OTka 3a ONON3OTBOPBAHe HA CbIbPkaUNTe Ce B T8X BTOpNHycypOBHn.

CMMBOJN

IpeDynpexdEHe OTHOCHO630nacHocCTTa

CEcbOTBcETCTBNE

V HanpekeHne

NoctoHToH ToK

min

O6opOTN INIIN Bb3BpaTHo-NOCTbNaTeHNH DnKHeHH B MmHyTa

0

KanaunTeHaaHrata

Ckopoct 6e3 HatoBapBaHe

EurAsian 3HaK 3a CbOTBeTCTBnE

Ppoetete HNCTpyKunTe BHNMaTeHNO, npEn da cTaptnpate MaunHaT.

YKpaHHckn 3HaK 3a CbOTBETCTBNE

i He 3actocobyTe HAdmipHn TnCK. CBeepna

MOxuyTb 3rHaTnCra, IIO npu3BeDe Do nolamKn a6o

yKU BtpaN KOHTPOH, B pe3yNbTaTI YORO MOXHa OTPMaTIN Kxata TpaBM.

YdapnI Dpnlb Pnp3NaueHn IJRA CBepDneHHa MaTepiAIB, BKNIOUOuN DepeBO, MeTaN, NlactNK BIKOPINCTAHNM CBepDna, 10Ma DCiametp MeHwe, HIX 13 MM.

pi3i 1 aon TmnpaTpyn HABKOINHbOro CepeoBua i npctpoio nd uac BkOpncTaHHB bD 0^ do 40^

Diana3OH TemnepaTyprn HABKONHbOre cepeOBua DnI npictpoi nd yac 36epirAHnB BID 0^ do 40^

Pnpo6oTi B ynapHomy pexkmi, ynapHa dpnilb MoXe 6byuBnKOpNCTaHa Dnra CbePdIeHHK KlaKn i NODHIX PekOMeHIOBaHni diana3OH TempepaTpyri 3OBHIuHbO r MaTepiianib.. B pexkmi 3arBuHcyBaHHy, yadha Dpnilb CepeIOBUnsI dny CNCTeMNI 3apJxKaHHN niD qac MOKe BnKOpNCTOBVByAHTCnIg 3aBrHHvBAHHN FBNHTB

ДяdoB6aHЯ Ta CBepdneHHa KaM'HaOH KJaDKN, 6yTN BnKOpNCaHn peXm MoNtKa.

TEXHIKA B3NEKN PNI EKCINYATAUII AKMYJTOPHOIBATAPEI

TNEPEDXEHH

IpoountaTe Bci npabna 6e3neKn, iHctpykuii, inHcTpauii i cneunphiauii, 0o noCTaBnHOb3 eEeKtpoiHcTpymemtOM. HeDoTPmHaHH Bcix 3a3HaueHnx IHctpykuim MoKe npu3BeCTn Do ypaKeHH eJeKtpnuHm CTpyMOM, noKexi Ta/a6o cepno3Hx TpaBM.

36epexitb Bci iHCTpykuii i Bka3iBKn dna Ma6yTHbORO BKNOPNCtAHHa.

TNEPEXEHNA

Дя 3anobirahn He6e3neu noxekxi B pezylbata KopoTKoro 3amKacHH, TpaBMam i NOsKOJxHHO Bnpoib He 3aHypouTe IHcTpymeHT, 3mHnn akymyIaTOP a60 3apdHni npictpi y piHy donyckaIte NotpanJIHH pIDHN BCEpeDHy npCtpoIB a6o akymyIaTOPB. Kop03iHi i cTpyMOnpObiHi piHN, Taki JK coNoHNI po34HNI, NEbHI xIMiKaTu, BN6IIIOBaJIbHi 3aco6n a6o npOdyKTU, IO IX MICTaTB, MOxYb npN3BeCTN DO KopoTKoro 3amKacHH.

IONEPEJXEHH3BE3NEKNBVKOPNCTAHH YAUPHOIIPNI

PABNJATEXHIKBE3NEKNDBBCIXONEPAUIN

■ПдчacВNKoHaHHЯОпацii，Bякій pixуyme npinlaДЯ a60 кріnntbHm Bnpi6 moKyTb KOHTaKtYBaTn 3 npnxOBaHOIO npOBOdKOIO, TpimaiTe eNeKtpoiHCTpyMeHTiJbKn 3a i3OJIbObaHi nobEpxHI.Пдчac KOnTAkTy pIXyUro npinlaДЯ a60 kPinnIbHnx Bnpo6iB i3 npOTom nID HanpyRO, Hanpyra TaKox MoKe nepeDaBaTncr Ha MeTaJIeBi cak eNeKtpoiHCTpyMeHTy nID HanpyROI KoPnCTyBaH Moke 6ytuypKeHM eNeKtpnUHm CTpyMOM.

INPABNIA TEXHIK INEKEN INKOPNC IOBIX CBEPEN

Hikonn He npaoute Ha 6ilbW BnCoki Wbnkocti, HIX 3a3haeHa DnA CBePna MaKcMaIbHa WbndkicTB CBePdInHHa. Ha 6ilbW BnCOKnx WbndkocTAX, CBePdNO, WbnDwe 3a BCE, 3irr KIO my 6yde Do3BoneHO BiNbHO oBeptatncs, 6e3 KOHTaKy i3 3arOTOBKOHO, Mo MoKe npn3BecTu TpaBM.
3aBxDn nouHaIte CBepDnIHHa Hn3bKiWNbDKoCTi, KOJIHakoHeuHK CBepJa KOHTaKTyE 3 3arOTOBKOIO. Ha 6inbBnCOKNX WBNDKOCTX

Диаэн Temпетурн HabkonHbOro cepeDObuza ДЯ akymлтopa πiД yac BnKOpNCTaHHr mix 0°C Ta 40°C.
Diana3OH TemnepaTp 30BhiHbO rocepeoBua nIqac 36epiraHHa kymyTota mix 0^ ta 20^

TPAHCIOPTYBAHHJITIEBHX BATAPEI

TpaHcnpTyTe 6aTapeIO BiINOBiIDHO IO MICeBux Ta haioHaIbHnX nIoKeHb Ta npabIn.

HOTpmytebc ycix cneiaIbHNBIMOR 0do naKyBaHH Ta MapkyBaHH npn TpaHCnoptyBaHHi 6aTapei TpeTboo CTopoHO. PepeKoHaTeCra, 0o 6atapei He MoKyTb BCTynATN BOHTAKT 3 IHuMm 6aTapeMn a6o npObiHMM Maepianamn npn TpaHCnoptnpOBci, 3axuauoyn BiDkpnti po3'EMn iOJauHMM HnpoBOdAUMM KpuKAMn a6o cTpiKoIO. He nepeBO3NTn 6aTapei, kMaTOb TpiUHn a6o npoteuk. KoHcyIbTyIeTce3 ekPeDITOpcbKOIO KOMnaHIO Dn IOnaJIbXkOHcyIbTaui.

3AIIHKOBI PN3IKN

Habib KOLIN npOdyKT BKNOPNCOTByeTbCRA HAHCaHO, 3aIIuMaTeBcHemoxKnBIM NOBHCTHO yCyHyTN DeAki 3aIIuKoBI YHHNKn Pn3Nky. HactynHi He6e3NeKN MoKyTB BHNKHyTNI onepatoP NOBHeH 3BepHyTN Oc0bNBy yBary,

UOyHmKHyTu HAcTyNHO:

I OuKoKeHHcLyXy, BnKnKaHe yMOM

-HaIraIte 3acO6n 3axncty nIraOpraHIB cIyxy Ta IimityTe BnINB.

TpaBMyBaHHOyei

-Hocitb 3axnchi okyIapn a6o okyIaepHi BnKOpNCtAHPi npOdykTy.

TpaBMn, BnKnkaHi Bi6paicio

JIMITYe BnINB. DOpTpMMyTEcB IHCTpyKci, 3a3HaueHnx y po3di «3MeHHeHHr pu3NkY»

YpaxKeHHe eEnkTpnuHm Ctpymom uepe3 KOHTaKt i3 npNXOBAHm IpOBOdAmn

-TpmaTe npoDyKT tIbKn 3a iOsbObahi nobepxhi.

TpaBMn, BnKlnKaHi nnJLOM.

-Пил,якн CTBOPHoeTBcprn BnKOpNCTaHI BnPo6y,MOKe npn3BecTN Do TpaBMn DnxaJIbHNxHaIraIte BiIOBIDHy NIIIO3axNCHy MackyФiNbTpOM, npndaTHM dIЯ 3aTpMaHHa MaTepiany,io o6pO6JIooETbcR.

3HIXEHHHPN3NKY

Nobidomlaioe, 0o Bi6paui BiD pyHnx iHCTpyn neBHX oci MOKytb CnpnA TcAHy, kNn Ha3 cnHdPOMOM PeHNO. CmNTOMM MOKytb BKNHOATNI KOKIOBAHH, OHIMHH I 36JIiHeHH naIbU, Rk npaBnO, OeBnHi npn BnIBi XoIoY. CnaIKoBI paKTOpN, xoJOny IBORKocTi, DiTa, KypIHn I pOboa npaKTnKa, Bci Li qHHNKn PO6Tb CBi BHEcOK y Po3BnTOK uX CNMTOMIB. Lz 3axOu MoKytb 6yTu npnHrti onepaTopOM, MOKINBO 3MeHNTH BnNB Bi6paii:

TpmaTe TINO B TenoNl B xonoHy norOdy . Pnp Eeknlyataui npnaLy, OJraTe pykabuKn, uo6 TpmaTy pky i 3an'acty TenoI. NobidomlnocA, 0xonoHa noroDA c OCHOBHM qHHKOM, CnHdpomy PeiHo.
■IicnaKoXHoro nepioDy po6Otn,3diinCHOnTe BnpaBNn niiBnueHH KpOBo06iry.
Poibt b qacti nepepBn B po6oTI. 3po6iTb oMeKeHHa KJIbKOCTI BnNBy Ha deHb.

KuO BN BiDyBaTe 6yB-ryi 3 CmITOMIB LbOTo CT Bichomy UeHTpi.

HeraHNO npnHHiB BkOpNCtAHN i 3BepHiTbcra Do Nikapr 3 CIMNTOMAMN.

TONEPEDEXEHH

TpBae BnKOpNCTaHH iHCTpyMeHTy MOKe BnA a6o nocuHt TpaBMn. PnBnBnKOpNCTaHHi HCTpyMeHTy npotrorm TpBaNo nepiody, po6iTp erpynapHi nepepbn.

3HAHTECBIINPPOYKT

ДиВ.стор. 81.

1.перемпа чпебач

72 | ykpaIHcbKa MoBa

1. Ipeemnkaun uBvdkichoro peximy
2. PeryIIOBaJIbHe KINbIe KpyTHOrO MometHTy
3. NatapoH
4. Hanpymok o6epTaHHc eJIeKTopa
   6.Пусковий raayok 3perylnobAHm WbUdkocti
5. CBd cbitno
6. Micce dnia 36epirahn6iTn
7. MiHHe Ie3o wypynokpya
8. Hhizdo nla akymyIaTopa
   11.Pyka,izonboBaHa nobepxHryIytpMaHHa

OECIpyOByBAHH

PONIEPEIXEHNA

IpoDyKT He IOBHNHe 6yt Niiknuehen Do xKIBNeHHN, KOJIu BN 3bnpaTe DeTani, perynIOeTe, uCTnTe, npoBOIDTe TexHicHe obcnyroByBaHH a60 KIOJI npOdyKT He BnKOpNCTOBvEcbr. BiKnIOUeHH NkIOJpyTdoONOMKe yHnKHyTN BuNaKDoboro 3anycky, AIKM MoKe npIN3BeCTnDo cepNo3HNx TpaBM.

IpioucbnyrobyaHHi BnKOpNCToBMyTe TlNbKn iDeHTNHI 3anachi YactHH. BnkOpNCTaHn8 6yDb-yaNX iHnx DeTaneMe MoKe CTBopNTn He6e3NeKy a6o cnpuHnHTn
eHTIBNoJKOJKeHnI npOyKTy. 1BaCTbC8
He BnKOpNCToBnyTe po3HnHHKn dIy OChuEHHn pnaCTMacOBnx Detanei. BiNbwiictb nPactMac BnNpa3nBa Do pi3Hx BVdIB KOMepuiHHx po3HHNKiB i MoKe 6ytn NowkoDkeHa ix BnKOpNCtAHNM. BnKOpNCToBnyTe qHCTI raHcipKn dIy BnDaJIeHHN6pydy uo6i ByrInhHorO nIHy.
Hikon He do3BONrTe raIbMIBHi piHni, 6eH3nHy, npOdyKTam Ha OCHOBi HaΦTn, i npOHnKaOuMm MacnAm BCTynatn B KOHTAKT 3 pNactIKOBUMn DeTaJAMn. BOHN MICTaTB xIMiHi peOBOHH, kI MOKytB 3aWKoDNTn, CnpNa6ntn a60 3HnUHTn PnaCTNK.
3aBXn HndraIte 3axnci OKyIpyn a6o 3axnchi OKyIpyn 3 6iHmN uNTkamn nIac po60tn eNeKtpoiHCTpymEnta a6o npn 3dyBaHHi nnny. RaKpo60ta NnBHa, TAKOx Hocit 3axnchy Macky.
Длбьwoi6e3nekn i HadiHocti, Bci peMOHTi po60Tu NOBHHI BIKOHyBaTnCBA ABTOPu3OBaHOMy

3MAUyBAHHY

Bci niDnHnKn B npOkyTi 3MaJeeHi DoCTaTHbO KoIbKicTIO
BnCOKoRiCHOro MaTnJa DnB BCbOro TepMHy Cnyx6n
PpOdykTy npHopMaJIbHnx yMOBaX ekCnNyatau. TaKIM
YHOM,doTaTKOBe 3MaJSeHH He Notpi6Ho.

3AXNCT HABKOLINHbOTo CEPEIOBUNa.

Ipeepo6nIe CnpOBHy 3amictb ytniiaaii B kocti BiXOIB.MaunHn, obnadhaHHy npakobka noBHHi 6yTu BiDCPTOBaHI dny dpyKhboi DnHaBKOINHbOro cepedOBuza ytniiaaui.

CNMBOJIH

PonepeJxehn6e3neK

CEBIDIOBIDHICTB

V BoJbTu

IociiHn CTpyM

min

06epTu a6o 3BOpToHo-noCTynanbHi pyxu y XBUNHy

Notykhictb naTpoHy

山BnKicb6e3HabaTaXeHHA

Ecba3iIcbkni 3HaK BiDnOBiDHOCTi

Bynb nacka, yBaXHo npOHTaTe IHcTpKuio neped 3anyckom npOdykTy.

YkpaHcbKm 3HaB ViIDNoBIDHOCTI

CBepeHHe 6e3 CTnCKaHH

3aBHHyBaHHa

UdapnH npnlb

BixxOnn eNekTPOTeXHIOI npOdykuii
He cnid Bkndatn pa3om i3 nobyTOBMn
BIXoamn. Byb naCk, nepepobnyTe
Tam, de HareBhe yCTaTKyBaHHa.
PipebpTE 3 Baunm MicueBm
opraHOM Bna n a6o npOdaBcem dnn
KohcynbTaui 3 npBvody nepepo6Kn.

CNMBOINB LIEIHCTPYKU3 EKCNIYATAU

PpMItka

PonepedkeHHa

3anachi detani a6o npnHaleKHOCTI npOaIObcr OKpEMO

KpyTHNI MOMeHT, MaKcIMaJIbHNI

KpyTHM MOMENT, MIHIMaJIbHNI

UbukicTb, MihimaJbHa

UbNkictb, MaKcImaIbHa

HnKcBka3aHi nonepeJXJIbHi cNoBa Ta CnMBOJI nOraCHIOBT bIeHb pN3NKy npn po60Ti 3 UIM npuJaOM.

HEBE3NEKA

Bka3ye Ha HEMMHyHe He6e3neHy CnTyauio, JaKa, KaIoo II He YHNKHTN, MoKe npu3BecTu DO CmepTi abo cepno3Hnx TpaBM.

NONEPEDXEHH

Bka3ye Ha notehuiHo Hebe3neuHy cnTuayiHO, kKa, kKIO II He yHnKHTN, MOKe npn3BecTN do CmeptI a6o cepno3Hux TpaBM.

YBAGA

Bka3ye Ha noteHuiHo Hebe3neuHy cnTuauio, kka, kkuo ii He yHnKHyTu, Moke npn3BeCTn Do cepenhboi a6o nEkoI TpaBMn.

YBAGA

(Bε3 CmBony nonepeJxKHeHn np He63neKy) Bka3yε Ha cnTyauio, yka moKe npNBecTn Do MaTepiJIbHnx 36ntkiv.

The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 62841 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period.

An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns.

FR AVERTISSEMENT

In addition to any statutory rights resulting from the purchase, this product is covered by a warranty as stated below.

1. The warranty period is 24 months for consumers and commences on the date the product was purchased. This date has to be documented by an invoice or other proof of purchase. The product is designed and dedicated to consumer and private use only. So there is no warranty provided in case of professional or commercial use. This warranty applies only on new products.
2. There is a possibility to extend for a part of the range of power (AC/DC) the warranty period over the period described above using the registration on the www.ryobotools.eu website. The eligibility of products for extended warranty is clearly displayed in stores and / or on packaging and is contained within the product documentation. The end user is required to register his/her newly-acquired products online within 30 days from the date of purchase. The end user may register for the extended warranty in his/her country of residence if listed on the online registration form where this option is valid. Furthermore, end users must give their consent to the storage of their personal data that is required to be entered online. They must also accept the terms and conditions. The registration confirmation receipt, which is sent out by e-mail, and the original invoice showing the date of purchase will serve as proof of the extended warranty.
3. The warranty covers all defects of the product during the warranty period due to faults in workmanship or material at the purchase date. warranty is limited to repair and/or replacement and does not include any other obligations including but not limited to incidental or consequential damages. The warranty is not valid if the product has been misused, used contrary to the instruction manual, or has been incorrectly connected to a power supply. This warranty does not apply to:

any damage to the product that is the result of improper or lack of maintenance

any product that has been altered or modified
- any product where original identification (trade mark, serial number) markings have been defaced, altered or removed
- any damage caused by non-observation of the instruction manual
- any product not displaying the CE approval mark on the rating plate
- any product that has been attempted to be repaired by a non-authorised warranty service centre or without prior authorisation by Techtronics Industries

• any product connected to improper power supply (amps, voltage, frequency)

• any damage caused by external influences (water, chemical, physical, shocks) or foreign substances

normal wear and tear spare parts
- inappropriate use, overloading of the tool
-use of non-approved accessories or parts
- Power tool accessories provided with the tool or purchased separately, including but not limited to screw driver bits, drill bits, abrasive discs, sand paper and blades, lateral guide, etc.
- Components (parts and accessories) subject to natural wear and tear, including but not limited to service & maintenance kits, carbon brushes, bearings, chuck, SDS drill bit attachment or reception, power cord, auxiliary handle, transport carry case, sanding plate, dust bag, dust exhaust tube, felt washers, impact wrench pins & springs, etc.

1. For servicing, the product must be sent or presented to a RYOBI authorised service station listed for each country in the following list of service station addresses. In some countries your local RYOBI dealer undertakes to send the product to the RYOBI service organisation. When sending a product to a RYOBI service station, the product should be safely packed without any dangerous contents such as petrol, marked with sender's address and accompanied by a short description of the fault.
2. A repair / replacement under this warranty is free of charge. It does not constitute an extension or a new start of the warranty period. Exchanged parts or products become our property. In some countries delivery charges or postage will have to be paid by the sender. Your statutory rights arising from the purchase of the product remain unaffected
3. This warranty is valid in the European Community, Switzerland, Iceland, Norway, Liechtenstein, Turkey and Russia. Outside these areas, please 6. contact your authorised RYOBI dealer to determine if another warranty applies.

AUTHORISED SERVICE CENTRE

To find an authorised service centre near you, visit http://uk rybitools.e header/service-and-support/service-agents

RYOBI CONDITIONS D'APPLICATION DE LA GARANTIE

nl.ryobitools.eu/header/service-and-support/service-agents.

PT CONDIÇOÉS DE APLICACHA DA GARANTIA RYOBIR

UCIOBII PIPIMHEHINI IAPAHNTN HA IPOUYKNUO RYOB

JHMMO 3AKOHbIbNpAB, BO3HKaOIuHXn PnN OOKNYke, DAHOHe NIDJEH NOKpBBAETC rapaHTHmB COOTBECTBnN C pNBDEEHbIMN HIXYE NHKTAMM.

1. RapaHTHbI nepnoD nnoNOKyntane CoCTABnRE 24 MeCAc C DaTb NOKynIK NEDJeI.Data NOKYNIK DOnTHKa BbIbNOITBePKeJHaNoNNOTBQ3AN0NEHbIM rapaHTHbIM TanoHOM Y KEMO O NOKynIE DaHHoe NDEme PnpDAHsAHeHO ToBkoD IaeCtHoro NocNil3oBaHnIg NOKynATEMe. NoToMry rapaHTHne He PaacnOePTpaHcTeR HA NC0NJb3OBAHHe BnpOeCCMOHAbhBX INKOMMEpCEKHX CEJIAX
2. Pnycmopeha BO3MOKHOCTb npOnnHHeI Jnactn h3enHn HneKn
   ved anekponhctpymeHTo AC/DC) rapaHTmHOro nepnoia c nOMOu bjo
   permCTPme HA caite www.ryobitoolfo.n. Pabo INCHPTPMHTA He
   npoJHneRrnapHTMHO rpoNdoq YKTQa3AOB M aRa3HHax N /
   HnHa ynakOBke / n CoepjNKTCB CNOCTCYBOUeHnCHPTMeHTy
   dOKYMHeTAAuN. KOHeHbNoNBo3OBeTae DIOJKez 3apERCTPPOBATB
   CB0 npo6pTeHNb HnCTPmEB TceHE 30 dJeC dDaTb NOKYnK.
   KoNeHVb No3BOAtelb MOKET zaperInCTPpOBATb CB0 INCHPTPMHT Ha
   npoJHneRrnapAH B CTPAE CBOero npoxKBAHH, eCNn OHA Kya3aHa
   B FOPE OEHNH-pERNTaPauN. KpOME TORO, KOHeHb NoN3BOAtelb
   DONKe HdaB CBOe COrnae Ha xpaHHeN DAHNb, KOTOpB Heo6XoDMO
   BecTe B OHNaH-FOPMy npINHbT npABNA uYcNOb. PoTDBepKHeDE
   permCTPauN, KOTOpoe Bbl NOnyUHe No 3eKTOPHHO NoTHe 3aONHHeHB
   raPaHTmHb TaONH O pInnHaNBb Hk, B KOTOpOM YKa3aHa DaTa
   NOKYNK, BYDT CNyKbT DOKa3AEBtCBOM npOnDNEHOH rapaHTMn.
3. rapaHTnIO NKpBbAeT B TcHHe rapaHTnHoro nepHOA BCE depeKtBu KaeeCTBa HIN MATEPnANA HdEy NOyKnIKr. rapaHTNOr OPAHHepeMOHOMI INI INI 3aMeHOH N HE BKNOHaET NHKAKe DpyrNE O683ATenbCTBA, BKNOHAR, HO He OPAHnHVAOBc CnyAHbIMN IIN KOCBeHBmN y6bITKaMn. rapaHTnCTaHOBnTC HeDECTBENHO, ECINN NcONlB3OBAIOCb HE No HA3aHeHNo, BonPeKN IHCTpyKzHM, DAHNBM BYPOKOBOCTNeNoB3OBeTAeN B6IbNO HenPApNBIO nOaNkNOHeHO.HACToAraRAPaTHN E pACNPocTpaHReTc Ha:

HIObIe NOpEKeJENHn3JENINBpe3yNtate HEnpaBnHOrTOxHmckOBOcLnyKuBaHNuNNHeNoCTaToUHO yXoJa 3a nCHTPyMeHTOM

• nIObIe H3dJIINr, NOBBeprWneCnHMeHeHNrM MoNnDnKauuN
  IIO6BIE IADENII, OPGINHANBLHbIe IIDEHTWIDPKAHOHNbIe OTMEKIN KOTOPORO (TOPROBA MAPKa, cepuHbIy HOMep) 6bln NOBpeKdHbI, IMeHEHbI INI ydaHEbI
  IIOb6IIOBpeJHIN, Bb3BaHNbIE Heo6IOeHMEM HcTpyKmI PykoBDCTBA NOJIbO8aTeN
  IIObIe 3nEJIeH, He cTeITnHcIPOBaHnHbIe MApKIpOBKo "CE"dIpaOaKaB E BpOJIeNcKOM Co03e

IIObIe N3dHn, NOBepuueec nonbITkam peMOHTa HEKBAHmPPOBaHbIM paOHTNkOM mN 6e3 npEbaPHTbHoro yTBePXDHeH NcOMNaHE TeChtronic Industries.
NIO6bIe N3JENJI, NOQKHOHEnBHe K HENpABINbHOMY ICTOHNKY NITANAH (CINa TOKA, HAPRAXHEMe, YACTOTA)
JIIO6BIE NOPBEXDEHIN, Bb3BaHHHeB HBEHMMN BO3ECTBAMN (XMMHCKNE, CMNHCKNE, yyaba) INI NOCTOPOHHNBM EBECTBAMN
- eCTeCTBeHHbI IN3HOC 3aNaCHbIX DeTaJeN
HECOOTBETCTBYIOUee HcN0Nb3OBAHne,NEperpy3Ka MHCTPYMEHTA
- nCnOJIb3OBAHHe HeYTBePckDEnHbIX AKeCCcyapOB HNeOpINHaIbHbIX 3anaChbIX Detanei
akcccyapbl 3neKTPoHCTpyMeHTOB, NOCTaBnEeMbE C HHTpyMeHToMnn npno6petaeMaBte OTeBHO. K 3OTMY CnCKy OTHocTcH, HO Heuepehblaiot erO: cBepna LypynOpBeptop, DnenE, apBa3nBbIeDnCK, HauKaHyIO Bymary, ne3Bn I 60KObBE HanpaBnHOuie
KOMNHOHTb(DeTALnIKcCcEapB),NOBeDpKeHNHbIe cTeBcEHOMy IN3OcY nApa3bBy, BKNIOAH, HO He ORApHvBaBcB HApOpBd IaTeHHHeCKrOro OcNPyKmbAHa, YTOhBbIe 8ETK, NOUHMNHkN, NaTPOh, nepeoONHmS, KABeTI NtAHAn, DonOnHtEnbHbIe pyK, TYITpAbI dyraTHcNoPrtOpBkN, WIMFOBAJbHbIe NOoBuBb, NBueC6OpHNK, TpyoBdIaOBtaBn, BOINoHbIe ShaBbI, TBbpIn pNpyKnHbY ydaopbX knOChn dP.

I npOBeHnE TcNHeCCKOrO 6cnKbHaBnHn 3dEne CnEpyET HapBaTb B ATOpI3oBAHbIe cepBCHbIe cHtpBy RYOB1, ykazAHhBle I nKnD O TcPAnbIb N pBnBeEHOM Hxke cnncke aepocB CTaHm CepBnCHorO 6cNyKBaHnBn. B HEKOToPbX CTpaHax MeCTHbE dINJIepbI RYOBl OTnpAIBNIO HdEHN B cepBChbE opraHn3aunr RYOB1. Ppn OTnpAkB E cepBnCHbI ueHr RYOB1, n3dEne DOnKHO bItb 6e3onacHO ynakobAoH n He copeKaTb HnkAnx onaChbIX BeuecTB, TAKHX Kek3EHn, OJKNKe 6bItb NoiNCanah apec OtnpabNTen IN COpBOQdTaCB kPaTKM ONHCANEM HeCNpPABHOCTM.

5.PeMOHT/3aMeHnPOBODTCB PAMKxHACTOIePAHTHN66CnTaHO. OH He IPODJIeBaET rAPAHIO H He HAWHaET HOBBI rAPAHTINHbIy
pe npNO. 3aMeHEHhBe Detanu IN HCPTPYMeTB CTaHOBTCA HauSe CO6CTBEHHOCTbI. B HEKOToPbIX cTpAHAOTpABNTe bOJIXeOH
ONlAAHbAT CTOIMoCTb OTIPaBKn. Baum 3aOKHbIe pIpaB, BO3HKUHe
pI NOKYInE INCHPTMEnA, OCTaOTcR He3MehHHbIM

aHHra rapaHTnA DeiCTBNTenbHa B EbponeNcKOM Coo6uectBe,

UBeHapn, NcnaHm, HopBemn, JnxTeHusHe, Typm n Pocmn. Bhe ykaaHHbX Teppntopn 06paAaTecb K CBOemy aTOpN3OBAHOMy dInepy RYOBI, YTo6bI y3HaTb, npMeHraTcR nn ycNoBn KaKHX-n6o dpyrHex rapaHTn.

YNOLHOMOUEHHBIECPBNCBNI EHTP

YcboBbHnBnBzAunm yonHOMOeHHeB cepBCHNb ueHt, o6paTteCb KBe6-bayh://rHu.Rybitools.eu/header/service-and-support/service-agents.

PL

WARUNKI GWARANCJI RYOB

EN DECLARATION OF CONFORMITY

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Herewith we declare that the product

Percussion Drill

Brand: RYOBI

Model number: R18PD3

Serial number range: 46229702000001 - 46229702999999

is in conformity with the following European Directives and harmonised standards 2006/42/EC,2014/30/EU,2011/65/EU.

EN 55014-1:2017, EN55014-2:2015, EN 62841-1:2015, EN 62841-2-1:2018

RoHS documentation is compiled according to EN IEC 63000:2018

Todd Chipner

Sr. Director, CPT Quality and Asia Regulatory & Safety

Authorised to compile the technical file:

Alexander Krug, Managing Director

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

FR DÉCLARATION DE CONFORMITÉ

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Max-Eyth-StraBe 10,71364 Winnenden, Germany

Max-Eyth-Straße 10,71364 Winnenden, Germany

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Max-Eyth-StraBe 10,71364 Winnenden, Germany

Max-Eyth-Straße 10,71364 Winnenden, Germany

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Max-Eyth-StraBe 10,71364 Winnenden, Germany

NL CONFORMITEITSVERKLARING

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

RoHS-documentatio is samengesteld in overoonstemming met EN IEC 63000:2018

Todd Chipner

Max-Eyth-Straße 10, 71364 Winnenden, Germany

PT DECLARACAO DE CONFORMIDADE

Techtronic Industries GmbH

Max-Eyth-StraBe 10,71364 Winnenden, Germany

Pelo presente declares que os produits

Berbequim de Percussao

Marca: RYOBI

Numero do modelo: R18PD3

Intervalo do numero de series: 46229702000001 - 46229702999999

Max-Eyth-Straße 10, 71364 Winnenden, Germany

DA OVERENSSTEMMELSESERKLÄERING

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Max-Eyth-Straße 10, 71364 Winnenden, Germany

SV KONFORMITETSDEKLARATION

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Härmed deklarervi attprodukterna

Stiagbort

Marke: RYOBI

Modellnumber:R18PD3

Serienummerinterval:46229702000001-46229702999999

Max-Eyth-Straße 10, 71364 Winnenden, Germany

FI SÄÄNNÖSTEN NOUDATTAMINEN

Techronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Max-Eyth-Straße 10, 71364 Winnenden, Germany

NO SAMSVARSERKLAERING

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Herved erklaerer vi atprodukter

Slagdrill

Merke: RYOBI

Modellnummer: R18PD3

Serienummerserie: 46229702000001 - 46229702999999

Max-Eyth-Straße 10, 71364 Winnenden, Germany

RU 3AABJIHEHNE O COOTBETCTBHN TPEBOBAH

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

HaCToIIMMb3aBnE,HTOdaHbI npOpyKT

DpeIyVaapHOrO DeiCTBn

Mapka: RYOBI

HOMeP MoJeN: R18PD3

Duaaoh3aBocnHmOpOB:46229702000001-46229702999999

COOTBeTCTByET Tpe6oAHnM CneDyUOuX DnpeKTHB EC n cornaOBaHHbIX cTaHapTOB

2006/42/EC, 2014/30/EU, 2011/65/EU.

EN 55014-1:2017, EN55014-2:2015, EN 62841-1:2015, EN 62841-2-1:2018

Dokymehmaa RoHS coomeemcmey em cmandapmy EN IEC 63000:2018

C

Todd Chipner

H DnpekTpo NO KOHTPOJIO KaueCTBa npOdyKuM CPT, HopmatBOB 6e3onacHOCTN

B AmaTckOM permoHe

Max-Eyth-Straße 10, 71364 Winnenden, Germany

PL DEKLARACJA ZGODNOSCI

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Max-Eyth-Straße 10, 71364 Winnenden, Germany

RO DECLARATIE DE CONFORMITATE

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Prin prezenta,declaream ca produsele

Ciocan percutor

Marcà: RYOBI

Numar series: R18PD3

Gamā numār serié: 46229702000001 - 46229702999999

Alexander Krug, Director general

Techtronic Industries GmbH

Max-Eyth-StraBe 10, 71364 Winnenden, Germany

CS PROLÁSENI SHODE

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Timto prolasujeme, zeVyrobky

Priklepova vrtacka

Znacka:RYOBI

Cislo modelu: R18PD3

Rozsaheirovch cisel: 46229702000001 - 46229702999999

Ze tento vyrobek je v souladus evropskymi a harmonizovanymi standardy

2006/42/EC, 2014/30/EU, 2011/65/EU

EN 55014-1:2017, EN55014-2:2015, EN 62841-1:2015, EN 62841-2-1:2018

RoHS dokumentace sestavena dre EN IEC 63000:2018

Todd Chipner

Vrchni feditel, jakost elektrickho naradi (CPT) a pdefpisy a bezpecnost pro Asii

Max-Eyth-Straße 10, 71364 Winnenden, Germany

LV ATBILSTIBAS DEKLARACija

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Ar so pazijojam, ka produkti

Triecienurbjmasina

Zimols: RYOBI

Modela numurs: R18PD3

Serijas numura intervals: 46229702000001 - 46229702999999

Max-Eyth-Straße 10, 71364 Winnenden, Germany

HU MEGFELELOSEGI NYILATKOZAT

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Max-Eyth-Straße 10, 71364 Winnenden, Germany

LT ATITIKTIES PAREISKIMAS

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Max-Eyth-Straße 10, 71364 Winnenden, Germany

VASTAVUSDEKLARATSI0ON

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Kinnitame, et see toode

Lokkrell

Mark: RYOBI

Mudeli number: R18PD3

Seerianumbri vahemik: 46229702000001 - 46229702999999

Max-Eyth-Straße 10, 71364 Winnenden, Germany

PREHLASENIE O ZHODE

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Max-Eyth-Straße 10, 71364 Winnenden, Germany

IZJAVA O USKLADENOSTI

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Max-Eyth-Straße 10, 71364 Winnenden, Germany

DEKJIAPAUHRA3ACBOTBETCTBNE

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

C HactoToTeDeknapnpame,Ye npOdykTHTe

UdapHo npobuBaHe

Mapka: RYOBI

HomepHaMoDena:R18PD3

Oxbat Ha cepHHHomepa: 46229702000001 - 46229702999999

OTROBAPRA HA CNEDHHTe DnpeKTHNB HA EC nXapMOHN3npaHn CTAHdApTN

2006/42/EC, 2014/30/EU, 2011/65/EU

EN 55014-1:2017, EN55014-2:2015, EN 62841-1:2015, EN 62841-2-1:2018

Dokymentaunra3a RoHS e cbctabena B cbotbetcbe c EN IEC 63000:2018.

C

Todd Chipner

TJIaBEN DnpeKTOpKaueCTBO Ha CPT HOpMaTHBHO CbOTBeTCTBne 6e3OnaCHOCT 3a

A3n4

Max-Eyth-Straße 10, 71364 Winnenden, Germany

IZJAVA O SKLADNOSTI

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Max-Eyth-Straße 10, 71364 Winnenden, Germany

DEKNAUPAUIIPOBIDNOIBHICTb

Techronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Pn ybmy Mm 3aBnEmo, 0 npOdyKT

YdapHn npnlb

Mapka: RYOBI

Home page: R18PD3

DianaoHcepiHoroHomepy:46229702000001-4622970299999

YBIIIOBIIHOCTI 3 HAcTyHIMM EBPOneChbKMM DInpeKTHBaMM Ta rApMoHi3OBAHHMM CTAHADTAM

2006/42/EC, 2014/30/EU, 2011/65/EU

EN 55014-1:2017, EN55014-2:2015, EN 62841-1:2015, EN 62841-2-1:2018

Dokymentaia RoHS cKaeHa BIDNOBIDHO DO EN IEC 63000:2018

C

Todd Chipner

TEN. Dnepektop 3 netah kocti CPT, i peryiobanHna oxopoh npa t texhik6eaneK B Aaii

Max-Eyth-Straße 10, 71364 Winnenden, Germany

UYGUNLUK BEYANI

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Max-Eyth-Straße 10, 71364 Winnenden, Germany

△HAΩΣH ΣYMMOPΦΩΞH

Techtronic Industries GmbH

Max-Eyth-Straße 10,71364 Winnenden, Germany

Arau npovro 8nawoue on ra npoiov

Kooutiko Taunayi

Maogk:RYOBI

Apiouoc ouyéau: R18PD3

Eupoc eipiaikov apiouv: 46229702000001 - 46229702999999

Max-Eyth-StraBe 10,71364 Winnenden, Germany

EN RYOBI is a trademark of Ryobi Limited, and is used under license.

© 2019 Techtronic Cordless GP. All rights reserved.

© 2019 Techtronic Cordless GP. Alla rattigheter forbehálls.

© 2019 Techtronic Cordless GP. Bce npaea 3auuuehenbl.

© 2019 Techtronic Cordless GP. Vse pravice pridrzane.

71364 Winnenden, Germany