SB2400 - Blender AEG - Free user manual and instructions

USER MANUAL SB2400 AEG

SB2XXX_Sportblender_AEG NO-FARSI.indd 3 2017-07-06 15:16:084 www.aeg.com Visit our website to: Get usage advice, brochures, trouble shooter, service information: www.aeg.com/webselfservice Register your product for better service: www.registeraeg.com Buy Accessories and Consumables for www.aeg.com/shop CONTENTS ENGLISH 6 DEUTSCH 10

Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not nd on ordinary appliances. Please spend a few minutes reading to get the very best from it.

CUSTOMER CARE AND SERVICE

When contacting Service, ensure that you have the following data available: - Model Number - PNC number - Serial number The information can be found on the rating plate.

SB2XXX_Sportblender_AEG NO-FARSI.indd 4 2017-07-06 15:16:085 www.aeg.com SB2XXX_Sportblender_AEG NO-FARSI.indd 5 2017-07-06 15:16:086 www.aeg.com ENGLISH Thank you for choosing an AEG product. In order to ensure the best results, always use original AEG accessories and spare parts. They have been designed especially for your product. This product is designed with the environment in mind. All plastic parts are marked for recycling purposes. COMPONENTS A. Spill-Proof drinking lid B. Blend bottle C. Blade assembly D. On-O button E. Blender base F. Power cord Picture page 2-3 GETTING STARTED 1 Before rst use: Clean the blender according to the instructions in “Cleaning and Care”. Fill the bottle with ingredi- ents. Caution! Do not exceed the maximum lling volume: 600 ml. Do not mix dough, mashed potatoes, meat etc. 2 Fasten the blade assembly on the open end of the bottle, by turning it counterclockwise. Caution! The blades and inserts are very sharp! 3 Place the blender base on a at, level surface. Plug into a power outlet. 4 Turn the bottle upside down. Push down the bottle into the blender base and rotate it counterclockwise to lock. Note: When locked, the symbol on the blender assembly should be aligned with on the blender base. Cau- tion! To reduce risk of injury, never place the blade assembly on the base without the bottle properly attached. 5 Push and hold the On-O button to start mixing. The indicator light will illuminate until the On-O button is released. Release the On-O button to stop mixing. Caution! If the motor stalls, turn the blender o immediately, unplug the appliance and let it cool for at least 10 minutes. 6 When the ingredients are fully mixed: Release the On-O button to stop mixing. Make sure the motor has stopped completely, then turn the bottle clockwise to loosen it. Remove the bottle from the blender base. Replace the blade assembly with the drinking lid.

7 Unplug the appliance. The Tritan plastic bottle and lid are dishwasher-safe. Please wash the blades by hand. Caution! The blades and inserts are very sharp! 8 Clean the blender base with a damp cloth. Caution! Never immerse the blender base in water! Do not use abrasive cleaners or scouring pads when cleaning the appliance. 9 Available optional accessories: Extra bottles ASBEB1, ASBEB2. Enjoy your new AEG product! SAFETY ADVICE Read the following instruction carefully before using the appliance for the rst time.

• This appliance shall not be used by children. Keep the appliance and its cord out of reach of children. Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Children shall not play with the appliance.

• The appliance may only be connected to a power supply whose voltage and frequency comply with the specications on the rating plate! SB2XXX_Sportblender_AEG NO-FARSI.indd 6 2017-07-06 15:16:087 www.aeg.com

• Never use or pick up the appliance if: – the supply cord is damaged, – the housing is damaged.

• If the appliance or the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualied person, in order to avoid hazard.

• Always place the appliance on a at, level surface.

• Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning.

Do not immerse the appliance in water or any other liquid.

• Do not let cord hang over edge of table or counter, do not let cord contact hot surface, including the stove.

• Never use accessories or parts made by other manufactures not recommended or sold; may cause a risk of injury to persons.

• Make sure the motor has completely stopped before disassembling and cleaning.

• Avoid contact with moving parts. Contact could result in injury!

• The blades and inserts are very sharp! Danger of injury! Caution when assembling, disassembling after use or when cleaning! Ensure that the appliance is disconnected from the mains supply.

• Do not use the appliance for other purpose than its intended use.

• Do not attempt to bypass the safety interlock system that powers the appliance on.

• Never process boiling liquids (max 80 °C).

• Do not let this appliance run for more than 1 minutes at a time using heavy loads. After running for 1 minutes with heavy loads, the appliance should be left to cool for at least 10 minutes.

• When the mixer is subject to heavy use for chopping hard, dry substances such as nuts, the blades may become blunt. The mixer is not suitable for crushing ice, e.g. for cocktails. It is possible to add nuts occasionally to a mixture as long as this is not done on a continuous basis, as this will blunt the blades.

• Do not use this appliance to stir paint. Danger, could result in an explosion!

• Do not exceed the maximum lling volume as indicated on the appliance.

• This appliance is intended for domestic use only. The manufacturer cannot accept any liability for possible damage caused by improper or incorrect use. SB2XXX_Sportblender_AEG NO-FARSI.indd 7 2017-07-06 15:16:088 www.aeg.com TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE SOLUTION

The appliance does not turn on. The appliance is not connected to a power source. Connect the appliance to a power source. The bottle and blade assembly is not installed correctly in the blender base. The safety interlock system prevents the machine to power on. Install the bottle and according to instructions in “Operating instructions”. Contact authorized service. The motor stalls during operation. If the motor stalls, turn the blender o immediately, unplug the appliance and let it cool for at least 10 minutes. Ingredients are too large. Cut all rm fruits and vegetables into pieces no larger than 1.8 cm² to 2.5 cm². Wrong ingredients. The appliance intended use is production of beverages. Add fruits, vegetables or similiar. Never mix ingredients such as dough, mashed potatoes, meat or similar. RECIPES MAXIMUM PROCESSING TIME WITH HEAVY LOAD MAXIMUM CAPACITY 1 min 600 ml

PROBLÈME CAUSE POSSIBLE SOLUTION

PROBLEMA CAUSA POSSÍVEL SOLUÇÃO