Comfort Clean - Shoe polish BEEM - Free user manual and instructions

Product Type	Shoe polisher (polish)
Brand	BEEM
Model	Comfort Clean
Dimensions (L x W x H)	402 x 240 x 275 mm
Net Weight	Approx. 6.5 kg
Power Supply Voltage	230 V~
Line Frequency	50 Hz
Power	120 W
Protection Class	I
Main Functions	Cleaning, application of colorless polish, polishing
Cleaning Brush	Integrated, for removing dirt and dust
Polishing Brushes	Two brushes: one dark (dark shoes) and one light (light shoes)
Polish Tank	Integrated, with ball for dispensing colorless polish
Maintenance	Replacement of polish tank and brushes
Appliance Cleaning	Do not use harsh detergents; clean with a damp cloth
Electrical Safety	Do not use with damaged cable; do not immerse; unplug before maintenance
Prohibited Use	Do not polish suede, rough-surfaced or textile shoes
Available Spare Parts	Polish tank (ref. 900 021 016), polishing brush set (ref. 900 021 026), cleaning brush (ref. 900 021 061)
Warranty	Statutory warranty + extended manufacturer warranty (see BEEM website)
Included Accessories	User manual, polish tank, brushes (cleaning, dark polishing, light polishing)

Frequently Asked Questions - Comfort Clean BEEM

How to use the Comfort Clean device?

1. Turn on the device with the On/Off button. 2. Use the cleaning brush to remove dust. 3. Press the shoe against the ball of the polish tank to apply colorless polish. 4. Polish with the appropriate brush (dark for dark shoes, light for light shoes). 5. Turn off the device after use.

How to replace the polish tank?

1. Press the metal tab on the side of the holder. 2. Remove the holder with the tank by moving it to the right. 3. Remove the tank from its holder and replace it. 4. Reinsert everything into the device by snapping the tab back into place.

Can I use colored polish?

Yes, but be careful: colored polish can stain the brushes and subsequently polished shoes. Preferably use the supplied colorless polish.

What types of shoes should not be polished?

Do not use the device on suede, rough-surfaced or textile shoes. It is designed for smooth leather shoes.

How to clean the device?

Unplug the device. Clean it with a damp cloth. Do not use harsh detergents or abrasives. Never immerse the device in water.

What to do if the device does not turn on?

Check that the power outlet works and that the power cord is not damaged. Make sure the On/Off button is pressed correctly. If the problem persists, contact customer service.

Is it safe to leave the device plugged in?

No, it is recommended to unplug the device after each use, before cleaning, maintenance, or in case of failure.

What is the warranty for the device?

The device benefits from statutory warranty as well as extended manufacturer warranty on some products. Visit www.beem.de for detailed conditions.

How to replace the brushes?

Loosen the screw that holds the brush in its housing. Remove the old brush and insert the new one. Tighten the screw firmly to ensure proper operation.

Can I use the device on wet shoes?

No, shoes must be dry and clean before use to avoid damaging the device or the shoes.

USER MANUAL Comfort Clean BEEM

Elements of Lifestyle

Bedienungsanleitung

User Manual

Mode d'emploi

Open the fold-out page at the beginning and end of the user manual in order to view the illustrations during reading.

Safety instructions .... 13

Startup 15

machine description ..... 16

Operation and use 16

Servicing 17

Technical data 18

Spare parts and other accessories .. 18

Dear Customer,

before using the machine, please read the instructions contained in this user manual on startup, safety, intended use as well as cleaning and care.

Open the fold-out page at the beginning and end of the user manual in order to view the illustrations during reading.

Keep this user manual in a safe place and pass it on to any future owners together with the machine.

General notes

Copyright

This document is copyrighted. Any duplication or reprinting, in whole or in part, and the reproduction of the illustrations, even in modified form, is only permitted with the written approval of the manufacturer.

Notes on environmental protection

The packaging materials used can be recycled. When no longer re-d, dispose of the packaging materials rding to local environmental regula-

This product may not be disposed of in the domestic refuse within the European Union. Dispose of the mavia communal collection points.

Warranty/Guarantee

In addition to the statutory warranty obligation, BEEM also grants an extended manufacturer's guarantee for some products.

Provided this is granted, the corresponding details for each product can be found either on the product-specific packaging, advertising material or on the BEEM website.

Please visit our website to obtain more information on comprehensive guarantee conditions, available accessories and spare parts as well as user manuals in various languages.

Symbols used

DANGER

This indicates an imminent hazardous situation, which could lead to severe physical injury or death.

Follow these instructions to avoid ▶ danger.

WARNING

This indicates a possible hazardous situation, which could lead to severe physical injury or death.

Follow these instructions to avoid ▶ danger.

CAUTION

This indicates a potentially hazardous situation, which could lead to minor injuries or material damage.

Follow these instructions to avoid ▶ danger.

NOTE

A note contains additional information to simplify the use of the machine.

Intended use

This machine is intended primarily for non-commercial use in closed rooms for polishing shoes. Any use other than previously stated is considered as improper use.

WARNING

If not used for its intended purpose and/or used in any other way, the machine may be or become a source of danger.

Use the machine only for its intended purpose.

Observe the procedures described in this user manual.

No claims of any kind will be accepted for damage resulting from use of the machine for other than its intended purpose.

The risk must be borne solely by the user.

Limitation of liability

We assume no reliability for damage or follow-up damage in the case of:

failure to observe the instructions in ◆ the user manual,

use for other than the intended purpose,

improper or unsuitable handling, ◆

incorrectly performed repairs, ◆

unauthorised modifications, ◆

use of non-approved parts or spare ♦ parts,

use of unsuitable supplementary or accessory parts.

Declaration of Conformity

BEEM hereby declares that this appliance complies with the fundamental requirements and other relevant provisions of 2006/95/EC, 2009/125/EC and 2004/108/EC directives.

Safety instructions

Inspect the machine for visible signs of damage before use. Do not use a damaged device.

This machine is not intended for use by persons (including children) with restricted physical, sensory or mental capabilities or with insufficient experience and/or knowledge unless they are supervised by a person responsible for their safety or have received instructions on the use of the machine from such a person.

Children must be supervised to ensure that they do not play with the machine.

Store the machine and accessory parts out of the reach of children.

Do not leave the machine unattended during operation.

Only allow repairs to the machine to be carried out by an authorised specialist or by the works customer service; this particularly applies to replacing a damaged connecting cable. Unqualified repairs can lead to considerable danger for the user. They will also invalidate the warranty/guarantee.

Repairs to the machine during the guarantee period may only be carried out by service centres authorised by the manufacturer, otherwise the warranty/guarantee will become invalid in the event of damage or subsequent damage.

Defective parts may only be replaced with original spare parts. Only original spare parts guarantee that the safety requirements are met.

Only use spare parts from the manufacturer or spare parts that are specifically recommended by the manufacturer. The warranty/guarantee will otherwise be invalidated.

Do not use this machine together with an external timer or a separate remote control system.

The appliance is not suitable for in- stallation in an area where a water jet could be used.

The appliance must not be cleaned by a water jet.

DANGER

Danger from electric current!

Do not use the machine if the mains cable or mains plug is damaged.

Do not open the housing of the machine. Danger from electric current if live connections are touched and/or the electrical and mechanical configuration is changed.

Never immerse the machine or the mains plug in water or other liquids.

▶ Pull the plug out of the mains socket,

• when assembling and disassembling,
• if you are not using the machine,
• if a malfunction occurs during operation,
  – before you clean the machine.

Risk of suffocation!

Never play with packaging material. Risk of suffocation.

WARNING

Always disconnect the mains plug before assembling, disassembling, cleaning or storing the machine.

Keep hair, jewellery, loose clothing, fingers and other body parts away from the brushes.

Do not allow the connecting cable to hang over edges (risk of tripping).

When used for a longer period of time, the machine can become hot.

Allow the machine to cool down before using it again, storing it or carrying out work on the machine.

CAUTION

Do not stand or sit on the machine.

Do not leave any objects on the machine.

Do not the store the machine in the vicinity of heat sources.

Do not use aggressive or abrasive cleaning agents to clean the machine.

When using a coloured shoe polish, the brushes and shoes polished afterwards can discolour.

Exert as little pressure as possible with your shoes onto the brushes. The shoes can be damaged if too much pressure is exerted.

Do not use the machine to clean ▶ suede shoes, shoes with coarse or textile surfaces.

CAUTION

Never lift or move the machine with the mains cable.

Do not pull the connecting cable ▶ to remove the plug from the mains socket.

Do not crush the connecting cable. (e.g., under doors).

Do not expose the connecting cable to heat or chemical liquids.

Requirements for the place of use

For safe and trouble-free operation of the machine, the place of operation must satisfy the following requirements:

Put the machine onto a firm, dry and even base.
Do not install the machine in a hot, wet or very humid environment.

The mains socket must be easily accessible to enable quick disconnection of the machine from the electric circuit in the event of an emergency.

The surface finishes on floor coverings may contain substances that can be detrimental to the rubber feet of the machine. If necessary, place a mat under the feet of the machine.

Electrical connection

For safe and trouble-free operation of the machine, the following instructions must be observed for the electrical connection:

Before connecting the machine, compare the connection data (voltage and frequency) on the rating plate with those of your mains power supply. The data must correspond in order to avoid damage to the machine. If in doubt, ask your electrical machine retailer.

The mains socket must be protected by at least a 10 A automatic circuit breaker.

Ensure that the mains lead is undamaged and is not laid over sharp edges.

The mains cable must not be pulled ♦ tightly, bent or come into contact with hot surfaces.

Route the cable to prevent risk of tripping.

The electrical safety of the machine is only assured when it is connected to a properly installed protective earth (PE) conductor system. Connection to a mains socket without PE conductor is forbidden. If in doubt, the electrical system must be checked by a qualified electrician. The manufacturer assumes no liability for injury or damage caused by a missing or interrupted protective earth conductor.

Startup

Unpacking

Remove the machine, all accessory parts and the user manual from the box.

Remove all packaging materials and protective foils from the product and the accessories before using it for the first time.

NOTE

Do not remove the rating plate or any warning signs on the machine. If possible, keep the original packaging during the guarantee period in order to be able to pack the machine properly in the event of a guarantee claim. Transport damage will invalidate the warranty/guarantee.

Check the delivery contents

Check for visible signs of damage or missing items.

Report incomplete or damaged contents to your supplier immediately.

Before using for the first time

Remove the cap of the shoe polish ◆ container.

machine description

(See illustration on the below left of the fold-out page)

Housing1

ON/OFF switch2

Shoe polish container holder3

Shoe polish container4

Rubber mat5

Dark polishing brush6

Drive7

Cleaning brush8

Light polishing brush9

User manual 10

(not illustrated)

Operation and use

Switching the machine on/off

The machine is turned on and off via the ON/OFF switch (2) on the top side of the machine.

Using the machine

Switch on the machine.

First use the cleaning brush to remove dirt and dust from the surface of the shoes.

To apply shoe polish from the shoe polish container (4), lightly press the shoe to be polished against the ball that is attached to the turning mechanism underneath the shoe polish container (4). You can polish shoes of any colour with a colourless shoe polish.

Polish the cleaned and creamed shoes with one of both external polishing brushes (for this purpose, use brush (6) for polishing dark shoes or brush (9) for polishing light shoes).

Switch off the machine after using.

Servicing

Changing the shoe polish container (images A1 and A2)

To change the shoe polish container, proceed as follows:

First remove the holder (2) for the shoe polish container by pressing the metal latch (1) on the side of the holder.

Remove the holder with the shoe ◆ polish holder (3) towards the right.

Remove the shoe polish container ◆ from its holder (3) and replace it.

Put the shoe polish container back into the holder and replace it into the machine. To do this, hang the holder from the right – the opening of the shoe polish container points downwards – and press the holder backwards until the metal latch audibly snaps in.

Changing the brushes (image B1)

To change the brushes, loosen the respective screw that fixes the brush to the fixture (1). You can then remove the brushes from the fixture.

CAUTION

After changing, tighten the screws so that the brush cannot turn.

Technical data

Model	Shoe polishing machineComfort Clean
Type number CSL - 120
Dimensions 402 x 240 x 275
Main set approx. net weight 6.5 kg
Operating voltage 230 V~
Mains frequency 50 Hz
Power 120 W
Protection class I

Spare parts and other accessories

Item* Article No. Designation
4 900 021 016	Shoe polish container, with spring, ball and cap
6 / 9 900 021 026 Polishing brush set, light / dark
8 900 021 061 Cleaning brush

* numbering according to the description of the machine

Table des matières

Close-up of a beige plastic component with a white arrow pointing to a gray bracket, labeled 'A2' and circled number 3 (no text or symbols on the object itself)

Close-up of a mechanical device with textured fabric and a numbered annotation (1) pointing to a textured surface, no readable text or symbols present.

Elements of Lifestyle

BEEM GmbH

Subject to printing error.

For service in other countries contact your local dealer.