SPBW 3000 A1 - Power bank SILVERCREST - Free user manual and instructions
Find the device manual for free SPBW 3000 A1 SILVERCREST in PDF.
| Product type | External battery (Power bank) |
| Brand | SilverCrest |
| Model | SPBW 3000 A1 |
| Dimensions | 10.5 x 2.2 x 2.2 cm |
| Weight | 75 g |
| Battery capacity | 3000 mAh (3.75 V, lithium-ion) |
| Input voltage | 5 V -, 2.1 A |
| Output voltage | 5 V -, 2.1 A |
| Ports | 1 x micro USB (input), 1 x USB-A (output) |
| Charge indicator | 4 charge indicator LEDs |
| Main functions | Charging mobile devices via USB port, overcurrent protection |
| Operating temperature | 5 °C to +45 °C |
| Storage temperature | 0 °C to 50 °C |
| Permissible humidity | 10 % to 70 % (without condensation) |
| Package contents | Power bank, USB-micro USB charging cable, instruction manual |
| Maintenance and cleaning | Clean with a slightly damp cloth and mild detergent; do not use abrasive products |
| Safety | Do not expose to water, do not open, use only a 5 V / 2.1 A USB adapter, do not use while charging a device |
| Spare parts / Repairability | Not user-repairable; contact after-sales service |
| Warranty | 3 years (subject to warranty conditions) |
| General information | Category: Portable battery; household use only |
Frequently Asked Questions - SPBW 3000 A1 SILVERCREST
User questions about SPBW 3000 A1 SILVERCREST
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Power bank in PDF format for free! Find your manual SPBW 3000 A1 - SILVERCREST and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SPBW 3000 A1 by SILVERCREST.
USER MANUAL SPBW 3000 A1 SILVERCREST
Operating instructions
FR BE
BATTERIE EXTERNE POWERBANK DESIGN
Mode d'emploi
DE AT CH
DESIGN-POWERBANK
Bedienungsanleitung
DK
DESIGN- POWERBANK
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.
DK
GB/IE/NI Operating instructions Page 1
Information concerning these operating instructions . 3
Copyright 3
Notes on trademarks 4
Intended use 4
Warnings used 5
Safety 6
Basic safety guidelines 6
Descriptions of components 9
Start-up 10
Check scope of delivery 10
Disposal of packaging materials 1 1
Charging the Power Bank 1 1
Checking the charge level 12
Handling and operation 13
Charging mobile devices with the Power Bank . 13
Troubleshooting 15
Cleaning. 16
Storage when not in use 16
Disposal 17
Disposal of the appliance. 17
Appendix 18
Technical data 18
Notes on the EU Declaration of Conformity 19
Kompernass Handels GmbH warranty 19
Service 23
Impor ter 23
Introduction
Information concerning these operating instructions
Congratulations on the purchase of your new appliance. You have selected a high-quality product. The operating instructions are part of this product.
They contain important information on safety, usage and disposal. Before using the product, familiarise yourself with all handling and safety guidelines. Use the product only as described and for the range of applications specified. Keep these operating instructions in a safe place. Please also pass these operating instructions on to any future owner.
Copyright
This documentation is protected by copyright.
Any copying or reproduction, including in the form of extracts, or any reproduction of images (even in a modified state), is permitted only with the written authorisation of the manufacturer.
Notes on trademarks
USB® is a registered trademark of USB Implementers Forum, Inc.
All other names and products may be trademarks or registered trademarks of their respective owners.
Intended use
This device is an information technology device and is intended exclusively for charging mobile devices that are charged via a USB port as standard.
The appliance is not intended for any other purpose, nor for use beyond the scope described. This device is not intended for use in commercial or industrial environments. The manufacturer accepts no responsibility for damage caused by failure to observe these instructions, improper use or repairs, unauthorised modifications or the use of unapproved replacement parts. The risk shall be borne solely by the user.
Warnings used
The following warning notice types are used in these operating instructions:
DANGER
A warning notice at this hazard level indicates an imminently hazardous situation.
Failure to avoid this hazardous situation could result in severe injuries or even death.
Follow the instructions in this warning notice to avoid the risk of serious injuries or death.
CAUTION
A warning notice at this hazard level indicates a potential for property damage.
Failure to avoid this situation could result in property damage.
Follow the instructions in this warning notice to prevent property damage.
NOTE
A note provides additional information that will assist you in using the appliance.
You will find this symbol on the power bank housing.
The Power Bank must never be charged and used for charging an external device at the same time.
- Use only a USB mains adapter with an output voltage of 5 ~V and an output current of at least 2.1 A to charge the power bank.
Safety
In this section, you will find important safety instructions for using the appliance. This appliance complies with statutory safety regulations. Improper use may result in personal injury and property damage.
Basic safety guidelines
This device may be used by children aged 8 years and above and by persons with limited physical, sensory or mental capabilities or lack of experience and knowledge, provided that they are under supervision or have been told how to use the device safely and are aware of the potential risks. Children must not play with the appliance. Cleaning and user maintenance tasks may not be carried out by children unless they are supervised.
ADANGER! Do not allow children to play with the packaging material! Keep all packaging materials out of the reach of children.
Risk of suffocation!
Check the appliance for visible external damage before use. Do not operate an appliance that has been damaged or dropped.
Always place the device on a stable and level surface. It can be damaged if dropped.
- Do not expose the device to direct sunlight or high temperatures. Do not cover the device while charging. Otherwise it may overheat and be irreparably damaged.
- Do not place the product near heat sources such as radiators or other heat-generating devices.
- Keep the appliance away from open flames (e.g. candles) at all times.
The device is not designed for use in rooms with high temperatures or humidity (e.g. bathrooms) or where there is excessive dust.
- Never expose the device to extreme heat. This particularly applies to storage in a car. Extreme temperatures can occur in car interiors and glove compartments during long periods of immobilisation. Remove electrical and electronic devices from the vehicle.
- Do not use the device immediately after moving it from a cold room to a warm room. Always allow the device to acclimatise before switching it on.
- Never open the housing of the appliance. There are no user-serviceable or replaceable components inside the device.
- Do not make any unauthorised modifications or alterations to the device.
All repairs must be carried out by authorised specialist companies or by the Customer Service department. Failure to make proper repairs may put the user at risk. It will also invalidate any warranty claims. - Do not expose the device to water spray or dripping water, and do not place liquid-filled objects such as vases or open drink containers on or near the device.
Switch the device off immediately and disconnect any connected charging cables from the device if you smell fumes or notice any smoke. Have the device checked by a qualified specialist before using it again.
If you are using a USB power supply, the mains socket used must always be easily accessible so that the USB power supply can be quickly disconnected from the socket in a hazardous situation.
You should also observe the operating instructions for the USB power supply.
DANGER! Mishandling the batteries can cause fires, explosions, leakages or other hazards! Do not throw the device into a fire, since the integrated battery may explode.
Pay attention to any usage restrictions or prohibitions for battery-powered appliances in locations with specific hazard risks, such as petrol stations, aircraft, hospitals etc.
Descriptions of components
(See fold-out page for illustrations)
1 Power Bank SPBW 3000 A1 (model example)
microUSB charging port (input)
3 USB port (output)
4 ON/OFF button
Charge level LEDs
6 Charging cable (USB to microUSB)
7 Operating instructions (Symbol image)
Start-up
Check scope of delivery
(See fold-out page for illustrations)
The scope of delivery includes the following components:
Power Bank SPBW 3000 A1
- Charging cable
These operating instructions
Remove all parts of the device from the packaging and remove all packaging materials.
NOTE
- Check the package for completeness and for signs of visible damage.
If the delivery is incomplete or damage has occurred as a result of defective packaging or during transport, contact the Service hotline (see chapter entitled Service).
Disposal of packaging materials
aging protects the device from damage during transport. The packaging materials have been selected for their environmental friendliness and ease of disposal, and are therefore recyclable.
Returning the packaging into the material cycle conserves raw materials and reduces the amount of waste generated. Dispose of packaging materials that are no longer needed in accordance with applicable local regulations.
Charging the Power Bank
Before using the Power Bank, the integrated battery must be fully charged.
CAUTION
The Power Bank must never be charged and used for charging an external device at the same time.
Due to the high battery capacity and bearing in mind the charging time, the power bank must be charged using a USB mains adapter.
- Use only a USB mains adapter with an output voltage of 5 ~V and an output current of at least 2.1 A to charge the power bank.
Connect the USB plug of the charger cable to a suitable a USB mains adapter (not supplied).
Connect the microUSB plug of the charging cable 6 to the microUSB charging port 2n the Power Bank. An estimate of the charge level is shown by means of the charge level LEDs 5.
| LED display Charge level | |
| One LED is flashing < 20% | |
| One LED is on, the second LED is flashing | 20-49% |
| Two LEDs are on, the third LED is flashing | 50-74% |
| Three LEDs are on, the fourth LED is flashing | 75-97% |
| All LEDs are on 98-100% |
Checking the charge level
You can also check the charge level of the Power bank when it is not charged or is being used for charging.
Press the ON/OFF button 4 briefly. The LEDs 5 show the current charge level of the Power bank for about 30 seconds.
| LED display Charge level | |
| All LEDs are on 98-100% | |
| Three LEDs are on 75-97% | |
| Two LEDs are on 50-74% | |
| One LED is on 20-49% | |
| One LED is flashing < 20% | |
| All LEDs are off 0% |
Handling and operation
Charging mobile devices with the Power Bank
Insert the microUSB plug of the charging cable into the microUSB charging port of the mobile device, and insert the USB plug into the USB port on the Power Bank. The charging process starts automatically.
If charging does not start automatically, press the ON/OFF button 4 briefly to start the charging process.
NOTE
Alternative, you can also use the original charging cable (USB cable) provided by the respective device manufacturer.
During the charging process, the current charge level of the Power Bank is shown via the charge level LEDs (see table in chapter entitled Charging the Power Bank).
To end the charging procedure, disconnect the charging cable 6 from the mobile device and the Power Bank. The charging status LEDs 5 go off after about 30 seconds.
Troubleshooting
The Power Bank does not charge
Connection may be faulty. Check the connection.
A connected device will not charge
The integrated battery is empty. Charge the battery.
No connection to the device. Check the connection.
Press the ON/OFF button to start the charging process.
The charging current of the connected device is too low (< 60mA) or too high (>2,1A) .
The internal overcurrent protection may have been triggered. Disconnect the attached device and connect the microUSB charging port 2 to a power source for a short while (see section Charging the Power Bank). Afterwards, the Power Bank can be used again.
NOTE
If you cannot solve the problem with the above-mentioned solutions, please contact the Service Hotline (see chapter entitled Service).
Cleaning
CAUTION
Possible damage to the appliance.
There are no serviceable parts or parts requiring cleaning inside the Power Bank. Moisture can cause damage to the appliance.
To avoid irreparable damage to the appliance, ensure that no moisture can penetrate the device during cleaning.
- Do not use caustic, abrasive or solvent-based cleaning materials. These can damage the surfaces of the device.
Clean the housing of the device with a lightly moistened cloth and a mild detergent only.
Storage when not in use
Store the device in a location which is clean, dry, dust-free and not in direct sunlight.
For long-term storage, the integrated battery should be fully charged to extend its operating life.
Disposal
Disposal of the appliance
The adjacent symbol of a crossed-out wheelie bin means that this device is subject to Directive 2012/19/EU. This directive states that this device may not
be disposed of in normal household waste at the end of its useful life, but must be brought to a specially set-up collection point, recycling depot or disposal company.
This disposal is free of charge for the user. Protect the environment and dispose of this device properly.
You can obtain further information from your local disposal company or the city or local authority.
Appendix
Technical data
| Integrated battery | 3.75 V/3000 mAh (lithium ion) |
| Input 5 V | —, 2,1 A |
| Output 5 V | —, 2,1 A |
| Minimum discharge current | approx. 60 mA |
| Operating temperature 5°C to 45°C | |
| Storage temperature 0°C to 50°C | |
| Relative humidity (no condensation) | 10%-70% |
| Dimensions | approx. 10.5×2.2×2.2 cm |
| Weight approx. 75 g | |
Notes on the EU Declaration of Conformity
This device complies with the basic requirements and other relevant provisions of the European Electromagnetic Compatibility Directive 2014/30/EU and the RoHS Directive 2011/65/EU. The complete EU Declaration of Conformity is available from the importer.
This appliance has a 3-year warranty valid from the date of purchase. If this product has any faults, you, the buyer, have certain statutory rights. Your statutory rights are not restricted in any way by the warranty described below.
Warranty conditions
The validity period of the warranty starts from the date of purchase. Please keep your original receipt in a safe place. This document will be required as proof of purchase.
If any material or production fault occurs within three years of the date of purchase of the product, we will either repair or replace the product for you at our discretion. This warranty service is dependent on you presenting the defective appliance and the proof of purchase (receipt) and a short written description of the fault and its time of occurrence.
If the defect is covered by the warranty, your product will either be repaired or replaced by us. The repair or replacement of a product does not signify the beginning of a new warranty period.
Warranty period and statutory claims for defects
The warranty period is not prolonged by repairs effected under the warranty. This also applies to replaced and repaired components. Any damage and defects present at the time of purchase must be reported immediately after unpacking. Repairs carried out after expiry of the warranty period shall be subject to a fee.
Scope of the warranty
This appliance has been manufactured in accordance with strict quality guidelines and inspected meticulously prior to delivery.
The warranty covers material faults or production faults. The warranty does not extend to product parts subject to normal wear and tear or fragile parts such as switches, batteries, baking moulds or parts made of glass.
The warranty does not apply if the product has been damaged, improperly used or improperly maintained. The directions in the operating instructions for the product regarding proper use of the product are to be strictly followed. Uses and actions that are discouraged in the operating instructions or which are warned against must be avoided.
This product is intended solely for private use and not for commercial purposes. The warranty shall be deemed void in cases of misuse or improper handling, use of force and modifications / repairs which have not been carried out by one of our authorised Service centres.
Warranty claim procedure
To ensure quick processing of your case, please observe the following instructions:
Please have the till receipt and the item number (e.g. IAN 12345) available as proof of purchase.
You will find the item number on the type plate, an engraving on the front page of the instructions (bottom left), or as a sticker on the rear or bottom of the appliance.
If functional or other defects occur, please contact the service department listed either by telephone or by e-mail.
You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.
You can download these instructions along with many other manuals, product videos and software on www.lidl-service.com.
Service
Service Great Britain
Tel.: 0871 5000 720 (£ 0.10/Min.)
E-Mail: kompernass@lidl.co.uk
IE Service Ireland
Tel.: 1890 930 034
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
E-Mail: kompernass@lidl.ie
IAN 285323
Importer
Please note that the following address is not the service address. Please use the service address provided in the operating instructions.
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
DE-44867 BOCHUM
GERMANY
www.kompernass.com
Indholdsfortegnelse
Introduktion 27
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
DE-44867 BOCHUM
TYSKLAND
www.kompernass.com
Table des matieres
Introduction 49
Chere cliente, cher client,
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
DE-44867 BOCHUM
ALLEMAGNE
www.kompernass.com
Inhoud
Inleiding 73
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
DE-44867 BOCHUM
DUITSLAND
www.kompernass.com
Inhaltsverzeichnis
Einführung 95
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
DE-44867 BOCHUM
DEUTSCHLAND
www.kompernass.com
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
DE-44867 BOCHUM
GERMANY
www.kompernass.com
Last Information Update · Tilstand of information
Version des informations · Stand van de informatatie