SignaturePro - Breast pump Lansinoh - Free user manual and instructions

Frequently Asked Questions - SignaturePro Lansinoh

USER MANUAL SignaturePro Lansinoh

Lansinoh's dedicated Customer Service team is here to help.

If you experience any issues with your

Lansinoh Signature Pro™ breast pump please

call 800-292-4794 or

email [e-mail],

Monday - Friday 7am-6:30pm EST.

NE PAS RETOURNER CE TIRE-LAIT AU DÉTAILLANT.

Submit warranty card online at Lansinoh.com/warranty to receive an exclusive offer.

Designed for breastfeeding moms who want to continue to provide their babies with their breastmilk even if they have to be apart, the Lansinoh Signature Pro™ Double Electric Breast Pump is safe, efficient, and effective.

• 3 Customizable pumping styles to maximize your milk production & comfort
• Innovative technology mimics baby's natural feeding pattern
  Hygienic design, no milk backup guaranteed

When babies breastfeed, they start with quick sucking to stimulate your milk to let-down and flow. Once your milk has let-down, the baby draws the milk out with slower, deeper sucks.

While nothing can replicate exactly how a baby feeds at the breast, to simulate the natural rhythm, Lansinoh offers two phases of expression - the Stimulation Phase and the Expression Phase.

Stimulation Phase (Phase 1) is a faster pumping rhythm to trigger your milk to let down and start flowing.

Expression Phase (Phase 2) has a range of adjustable pumping rhythms and suction strengths that can be customized to your preferences---a key difference in the Lansinoh Signature Pro™ Double Electric Breast Pump!

If you have any questions, please call our customer service department at 800-292-4794 or email [e-mail].

Contents

Important Safeguards 4

Pump Diagram 6

Signature Pro Breast Pump Parts 8

Cleaning Instructions 9

Assembling the Breastmilk

Expression Set 10

Pumping Tips

Using the Signature Pro Breast Pump 11

Power Options 14

Breastmilk Storage Guidelines 15

Technical Data

Troubleshooting 18

Warranty 19

Important Safeguards

The Lansinoh Signature Pro™ Double Electric Breast Pump is a personal care item and for hygienic reasons should never be shared between mothers or resold from one mother to another. Either of these actions will void the warranty.

If you are a mother who is infected with Hepatitis B, Hepatitis C or Human Immunodeficiency Virus (HIV), pumping breastmilk using the Lansinoh Signature Pro™ Double Electric Breast Pump will not reduce or remove the risk of transmitting the virus to your baby through your breastmilk.

When using electrical products, especially when children are present, basic safety precautions should always be maintained, including the following:

Read All Instructions Before Using

Danger: To reduce the risk of electrocution:

Always unplug this product immediately after using.
- Do not use while bathing.
- Do not place or store this product where it can fall or be pulled into a tub or sink.
- Do not place or drop pump into water or other liquid.
- Do not reach for an electrical product that has fallen into water. Unplug immediately.

Warning: To reduce the risk of burns, electrocution, fire, or injury to persons:

This product should never be left unattended when plugged in.
- Close supervision is necessary when this product is used near children or invalids.
- Use this product only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
- Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water.
- Keep the cord away from heated surfaces.
- Never use while sleeping or drowsy.
- Never drop or insert any object into any opening or tubing.
- Do not use this product if it is broken or any parts are missing.
- Do not allow small children or pets to play with the pump unit, AC adaptor, etc.
- Do not use outdoors with the AC adapter or operate where aerosol spray products are being used or where oxygen is being administered.

Save These Instructions

along with your receipt for future reference.

0000 0000 0000 0000

Basic Controls, Display and Features

1 Power, On/Off button
2 Suction Level Increase Control Button
3 Cycle Mode Toggle Button
8 Time Display
9 Cycle Mode Indicator
10 AC Power Indicator
11 Battery Power Indicator
12 Suction Level Indicator
4 LCD Display
5 Stimulation/Expression Toggle Button
6 Suction Level Decrease Control Button
7 Stimulation/Expression Phase Indicator

Pump Diagram

13 Tubing input
14 Battery compartment
for 6 AA batteries (not included)
15 AC adapter input

AA Battery Compartment
(underneath pump)

AC Adapter

Lansinoh® Signature Pro™ Breast Pump Parts

Item Item Number

a Signature Pro Tubing #53403
a1 Silicone Tubes 300 mm (2)
a2 Silicone Tube 600 mm
a3 Signature Pro Tubing Y Connector #53405
a4 Signature Pro "Tubing Strap #50417
a5 Signature ProTM White Pump Connector #53453
Breastmilk Expression Set Includes:
b1 ComfortFit Breast Flange (2) #50408
b2 Signature Pro Breast Flange Body (2) #53454
b3 Signature Pro Diaphragm (2)
b4 Signature Pro Diaphragm Cap (2)
b5 White Valve (2 + 2 extra)
b6 5 oz (150 ml) Bottle (2)
Collar (2) and Sealing Disk (2).
d Signature Pro AC Adapter/power cord
Bottle Holder (2)

53402

53410

Two extra white valves are included. Larger size flanges are separately available for sale. To order replacement part or larger size flanges please call 800-292-4794 or visit www.lansinoh.com/store for details.

8

Before Each Use...

Always wash hands thoroughly with soap and water before handling the Breastmilk Expression Set, the pump body, or other attachments.
Disassemble the Breastmilk Expression Set to clean.
- Set aside the tubing as it does not need to be washed or sterilized.
- Ensure that the tubing is free of any liquid or moisture. Do not operate the pump if liquid or moisture is visible in the tubing.

Cleaning Instructions

Unless otherwise instructed by your healthcare provider, follow these sanitizing and cleaning instructions.

Sanitization

1. Prior to using the set for the first time, disassemble and boil all parts of the Breastmilk Expression Set that come into contact with breastmilk for 10 minutes.

Note: Ensure you use enough water to keep parts afloat while boiling.
Note: Do not boil the tubing and tubing connector.

1. Remove all parts from water immediately after boiling, using caution as parts will be hot.
2. Completely air dry before assembly and next use.

Note: Partially dried parts may affect operation of the pump.

Please ensure parts are completely dry before use.

Cleaning

• Set aside the tubing and tubing connector. These items do not need to be washed or sanitized because the diaphragm prevents them from coming into contact with the breastmilk.
• The breast flange and containers may be cleaned in the upper compartment of your dishwasher or hand washed with dish soap in hot water. For best results, we recommend using a baby bottle brush to clean the container and a baby nipple brush to clean the insides of the breast flange. DO NOT use solvents or abrasives. Rinse with hot, clean water.
• All other parts of the Breastmilk Expression Set should be hand washed to prevent loss and extend their usefulness.
  To clean your breast pump, wipe the base with a damp cloth,
  using only water or mild soap.
• Do not wash or sterilize the tubing or tubing connector.
  Note: Before using the Breastmilk Expression Set, visually inspect the individual components for cracks, chips, tears, discoloration or deterioration, as this may affect the functionality of the Breastmilk Expression Set. Please visit www.lansinoh.com/store or call 1-800-292-4794 for further guidance and replacement parts.
  Note: For best results, make sure the diaphragms are completely dry before use.

9

Assembling the Breastmilk Expression Set

Your Breastmilk Expression Set comes preassembled in Lansinoh product packaging. Clean Breastmilk Expression Set parts (except tubing and tubing connector) as described in the "Cleaning Instructions" section. Once all parts are clean and completely dry, assemble the expression set as follows:

1. Place purple diaphragm on top of breast flange body. Ensure lips on diaphragm snap tightly into gaps on the flange body per the illustration above. Then, snap clear diaphragm cap onto breast flange body enclosing the purple diaphragm. Twist diaphragm cap to secure.
2. Push ComfortFit™ breast flange into breast flange body.
3. Gently secure white valve into the bottom of breast flange body. Note: Use caution when handling and cleaning the small white va
4. Screw collection container onto breast flange body.
5. Insert tubing into back of Diaphragm Cap; ensure tight fit.
6. Insert tubing connector, at end of tubing, into tubing input on the pump.

Pumping Tips

The most important part of successful pumping is the ability to trigger the let-down reflex. This is when your milk begins to flow freely. Warm wet compresses applied to the breasts and gentle, circular massaging of the breasts prior to and/or during a pumping session can help encourage this natural reflex. Thinking of or looking at your baby, or a photo of your baby if you are apart, can also be helpful.

Some moms can achieve more than one let-down during a pumping session. You may be able to achieve a second or third let-down during your pumping session by returning to the Stimulation phase by pressing the Stimulation/Expression Toggle Button

How Long To Pump

Double pumping, compared to single pumping, will reduce the time you spend expressing your milk. Breastmilk is produced on a supply and demand basis and by expressing your breastmilk regularly, your body will be stimulated and you will be able to maintain your milk supply. Just like with breastfeeding, it is not necessary to time your pumping sessions though you will get a better sense of the time it takes for your body to express your milk using a breast pump. If you have any breastfeeding or breastpump related questions, consult with an International Board Certified Lactation Consultant (IBCLC), breastfeeding counselor, or other healthcare provider such as your primary physician.

Pumping and Feeding Tips

• You may pump one breast while nursing the baby on the other. This allows you to maximize pumping effectiveness using the let-down reflex stimulated by your baby's sucking.
• You may pump into any standard sized screw-top bottle or container.
• Should you choose to use the Lansinoh bottle with a nipple of your own, please take the following precautions:
• Always test the temperature of any liquid before feeding your baby.
  Do not let a child take a bottle to bed or self-feed for long periods.
• To prevent possible choking hazard, test strength of the nipple by pulling on the bulb portion. Discontinue use if any tear or crack appears.

Customize your pumping experience with the:

Lansinoh® Simple Wishes™ Hands Free Pump Bra (sold separately)

• Allows you to multi-task while pumping
  Adjustable back panel allows you to maintain an ideal fit over time
• Four-way layering support system secures and maintains a tight seal of breast flanges
• Works with all electric pumps

Lansinoh TheraPear® 3-in-1 Breast Therapy (sold separately)

Cold Therapy: relieves engorgement, swelling and pain
- Hot Therapy: relieves mastitis, plugged ducts
Breast Pump Aid: use hot/warm to reduce time spent pumping
Doctor designed, lactation consultant recommended

Using the Lansinoh Signature Pro™ Double Electric Breast Pump

The Adjustable Difference

Your Lansinoh Signature Pro™ Double Electric Breast Pump allows you to select suction levels and cycle mode separately to identify the settings that are most comfortable for you. You would use the + and - symbols to adjust the suction level and set the power of the pump while using the cycle mode to set the pumping rhythm that is most comfortable and efficient for you.

For Double Pumping

1. Make sure all tubes are attached to the tubing connector
2. Hold the Breastmilk Expression Set to your breasts so that the nipple is aligned to extend straight toward the nipple tunnel of the breast flange. Make sure the breast completely fills the breast flange so that a vacuum is formed and no air escapes. If you experience friction or discomfort on your nipples, you may need a different size flange. Larger size flanges are also available. For more details, please call 800-292-4794 or visit www.lansinoh.com/store.

The Breastmilk Expression Set and nipple tunnel must tilt slightly downward to allow milk to flow naturally toward the bottle.

1. Press and hold the On/Off Button for a few seconds to turn the pump on. Lansinoh Signature Pro Double Electric Pump will start in the Stimulation Phase

After two minutes, the Stimulation Phase will automatically change to the Expression Phase in Cycle Mode 2.

If you prefer to bypass the pre-set two minute Stimulation Phase or your milk lets down sooner than two minutes press the Stimulation/

Expression Toggle Button to move to the Expression Phase, where you can separately select the cycle mode and suction levels.

Note - the Cycle Mode Indicator will appear in the display to signify that you are in the Expression Phase.

The cycle modes of the pump can be changed using the Cycle Mode Toggle Button. Pressing this button will toggle between cycle modes.

Note - if at any time the suction on your breast reaches uncomfortable levels, reduce the suction level by pressing the button on the left side of the LCD screen. You can control suction levels in both phases by pressing the + and - buttons.

1. When a pumping session is finished, turn the pump off with the on/off button. After turning the pump off, the display will remain on for a few seconds. Make sure there is no suction on the nipple(s) before removing the breast flanges from the breast. If necessary, break the suction by inserting a finger between the breast flange and the breast. Once the suction is broken, the breast flange can be removed safely.

Please note: LCD display back light will automatically switch off if no control buttons are pressed for 20 seconds in order to save power. If the pump unit is left switched on and unattended for more than 60 minutes, the control system will automatically switch the power off. You have to press and hold the power-on button in order to switch the unit back on again.

NOTE: If the suction on your breast reaches uncomfortable levels, reduce the suction level by pushing the Suction button, or disconnect the tubing connector from its receptacle on the electric pump.

For Single Pumping

Remove one tube and close the tubing connector. Make sure that the plug is placed into the pipe outlet properly and pushed in securely.

Power Options

The pump may be operated under any of the following power supply modes:

AC Adapter (included)

Connect the AC adapter to the power receptacle located on the right side of the pump. Plug the AC adapter into an available electrical outlet.

Electrical safety can only be achieved when the breast pump is connected to the AC Power Adapter supplied with the product.

(See "Technical Data" section, page 15-16)

6 AA Alkaline Batteries (not included)

Make sure the batteries are inserted correctly according to the polarity (+) and (-) as indicated. Close the compartment by gently pressing the cover until it snaps into place.

Remove batteries if pump is not in use for a long period of time. Dispose of batteries according to regulations for environmental protection and recycling. Replace batteries as a simultaneous set.

Do not mix old and new batteries. Do not mix alkaline and standard (carbon-zinc) batteries. If batteries are in the pump, but AC adapter is in use, the pump will use the adapter to power the pump, not the batteries. For the most economical use, we recommend using your pump with the AC adapter provided. Your AC adaptor is a universal AC plug adaptor type and can be used with 100 Vac to 240 Vac systems with 50Hz and 60Hz mains.

Breastmilk Storage Guidelines

Breastmilk Storage and Thawing Guidelines For Healthy Term Babies

Check with your healthcare provider or an International Board Certified Lactation Consultant for specific storage instructions.

When you are freezing your breastmilk, do not fill containers more than 14 full to allow for expansion from freezing. Date containers with the date you expressed your milk for future reference.

in a Freezer	in a Refrigerator	Room Temperature
-0.4 to -4°F	39°F	66° to 78°F
-18 to -20°C	4°C	19 to 26°C
6 months (ideal)	72 hours (ideal)	4 hours (ideal)
up to 12 months	up to 8 days (acceptable)	up to 6 hours (acceptable)
(acceptable)	if collected in a very clean	(Some sources use 8 hours)
careful way)

Source: La Leche League International, 2012

Breastmilk Storage Guidelines

Note: DO NOT store breastmilk in freezer door. The door tends to be the warmest part of the freezer.

Date all breastmilk and use the oldest breastmilk first.

Thawing

Thaw frozen milk in the refrigerator or place the containers under cool running water, gradually warming the water until the milk is thawed. Thawed milk can be kept in a refrigerator for up to 24 hours.

NOTE: DO NOT refreeze milk once it is thawed.

Gently shake thawed milk before feeding to baby to mix the layers that have separated. Breastmilk is not homogenized and the "cream" will rise to the top of the bottle. Breastmilk can vary in color and consistency depending upon the time of the day that the milk was expressed, what you have eaten, and the age of the baby at the time of pumping.

NOTE: DO NOT MICROWAVE HUMAN MILK! Microwaving alters the composition of the milk. Microwaving also may create "hot spots" in the milk that could burn the infant.

NOTE: DO NOT thaw breastmilk in hot or boiling water.

Introducing the Naturalwave™ Nipple

Clinically proven to help babies maintain established breastfeeding patterns allowing your baby to go from breast to bottle and back.

The Natural Wave™ nipple is designed to mimic breastfed baby's natural sucking patterns to avoid nipple preference.

The patended NaturalWave™ Nipple enables baby to replicate natural sucking actions learned at the breast:

Latching on

Baby's lips open outward and latch onto the areola.

Peristaltic "wave-like" tongue movement

Baby's tongue moves in "wave-like" motion to compress nipple and extract milk

Swallowing

Back of baby's tongue rises, channeling the milk into the esophagus

Exclusive breastfeeding is recommended for the first 6 months of baby's life. Breastfeeding and breastmilk production should be firmly established before introducing a bottle and nipple.

Storage & Use:

Prior to use, always inspect and pull the feeding nipple in all directions to check the product. Throw away at the first signs of damage or weakness. For safety and hygiene reasons, replace the nipple every 7 weeks.

Before first use, boil all parts for 5 minutes to sterilize. Ensure all parts are completely covered in water and free floating.

Cleaning:

Before first use, place all components in boiling water for 5 minutes, allow to cool and thoroughly rinse all bottle components. Always wash all components of the product immediately after each use. The feeding nipple can also be washed in hot soapy water and rinsed in clean water. Dishwasher safe on top rack only. Safe to clean in a microwave-safe, steam sterilizer bag and special sterilizing machine. Do not clean with solvents or harsh chemicals.

Assembly:

Once thoroughly dry, insert feeding nipple through the top of the screw cap collar. Attach the screw cap collar securely onto the bottle neck. When carrying a full bottle, make sure it is closed with the collar in place, taking care to position the feeding nipple in the center of the collar to activate the "spill-proof" function of the product.

Precautions:

Do not leave the product in direct sunlight or heat, or leave in disinfectant ("sterilizing solution"), as this may weaken the nipple. Do not clean, store or allow feeding nipple to come into contact with solvents or harsh chemicals. Damage could result. Fill with the required amount of liquid and tighten the screw cap do NOT overfill.

Always check food temperature before feeding. Heating in a microwave is NOT recommended. If you choose to heat food this way, DO NOT SEAL CUPS. Do not warm the liquid by placing the bottle/cup directly onto gas or electric rings, warming plates, in electric ovens, etc.

Shake well before use and always check the temperature before feeding baby. Unevenly heated food may burn baby's mouth. Wash after every use.

WARNING!

DO NOT MICROWAVE HUMAN MILK! Microwaving alters the composition of the milk and may also create "hotspots" in the milk that could burn the infant

Allowing your child to use this product for prolonged periods separate from regular mealtimes or to go to sleep while drinking liquids, other than water, from this bottle may cause or contribute to early childhood tooth decay. Always use this product with adult supervision. Keep all components not in use out of the reach of children. Do not leave baby alone with drinking equipment due to the risk of choking, baby falling or if the product has disassembled. Never use feeding nipple as a pacifier or soother. Always check food temperature before feeding.

Attention:

Some juices and sterile solutions may make the silicone become opaque. This does not alter any of its properties.

Heating in a microwave oven may produce localized high temperatures. Take extra care when microwave heating and always stir heated food to ensure even heat distribution. Always test the temperature before serving.

Warning:

Packaging materials are not part of the product. For your child's safety, please remove and discard all packaging materials prior to use but read and retain the instructions for future reference.

Technical Data

1. Power Supply

Battery operation: 6 AA size alkaline batteries, all connected in series

Battery operating time: Approximately 2 hours with 6 alkaline batteries

AC Adaptor operation: 110Vac / 220Vac wall plug type AC adaptor, galvanically isolated with 9Vdc output voltage

Pump power dissipation:10.0 Watts maximum

Voltage regulation: Linear voltage regulator with low dropout voltage and short circuit protection

2. Control System

Control unit: Microcontroller with integral program memory

Program memory: 32K flash ROM, 2K RAM memory

HMI: LCD display with LED backlight, soft keypad

Single / double control: Single or double breast pumping possible

• Selectable pumping rhythm mode: 3 pumping rhythm modes are selectable and controlled from keypad

Adjustable suction level: 8 suction levels are selectable and controlled from keypad Suction vacuum level: Minimum 80 mmHg, maximum 220 mmHg

Technical Data

Power Requirements

AC Adapter (included)

AC Adapter - North American

Plug Configuration

110Vac/220Vac wall plug type

AC adaptor, galvanically isolated

adaptor with 9Vdc output voltage.

Batteries (not included)

6 AA batteries, 1.5V alkaline

Regulatory Compliance

UL (E302267) and CSA approved

with North American power adapter.

Regulatory Compliance

Type BF Applied Part

To maintain your power adaptor follow these instructions:

DO NOT WITH OF nonnative mutants

in power amplifier around the plug body

DO NOT use power adaptor if damaged

Warning: Children have STRANGLED in cords. Keep the cords out of the reach of children.

Troubleshooting

Troubleshooting the Lansinoh® Signature Pro™ Double Electric Breast Pump

Interruption of Electrical Service

If you experience an interruption in the normal operation of the electrical and/or mechanical functioning of the pump, simply do the following:
Unplug the AC adapter cord from the electrical outlet.
Wait a few seconds, and then plug the AC adapter cord back into the electrical outlet.
If you still experience electrical failure, try using the pump with the six AA batteries
making sure the AC adapter is removed.

Discomfort While Pumping

If you feel any discomfort, you may need a different size flange.

Visit www.lansinoh.com/store or call 800-292-4794.

Troubleshooting

Decreased Suction

If it feels like the suction has decreased, try the following:

Remove the tubing from pump and place a finger over the tubing connector. If you feel suction, the pump is operating properly, but the Breastmilk Expression Set may not be correctly assembled or the white valve may be damaged. If no suction is felt on your finger, try unplugging the adapter from the electrical outlet, wait a few seconds, and plug it back into the electrical outlet.
1 Make sure the Breastmilk Expression Set has been properly assembled. Check the assembly information in the section "Assembling the Breastmilk Expression Set", page 10.
Inspect the white valve for a tear or pinhole. This component is critical to achieving proper suction. Replace the white valve with one of the spare valves provided with the product.
When single pumping, check the tubing connector on the front of the pump to make sure it is closed for single pumping. If open, close the connector.
If double pumping, ensure that the breastmilk expression set is on both breasts before starting the pump.

Increased suction level for single pumping:

If it feels like the suction is higher than usual when single pumping, check that the plug for the pipe is clean and that the airway in the plug is not blocked.

Warranty

Limited Consumer Product Warranty (United States)

This product is warranted to the original consumer purchaser (the "purchaser") to be free from defects in material and workmanship which are not commercially acceptable for the period of one year from the date of purchase on the pump mechanism and the period of 90 days on all other product components. Warranty coverage terminates if you sell or otherwise transfer this product to another person. This warranty gives you specific legal rights and you may also have other rights, which vary, by location.

LANSINOH MAKES NO EXPRESS WARRANTY OF ANY KIND REGARDING THE PRODUCT OTHER THAN THOSE WARRANTY ES EXPLICITLY SET FORTH HEREIN. ANY IMPLIED WARRANTY, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, TO THE EXTENT PERMITTED BY LAW, SHALL BE LIMITED IN DURATION TO A PERIOD OF 90 DAYS FROM THE DATE OF PURCHASE BY THE ORIGINAL PURCHASER.

In the event the product is found by Lansinoh to not meet the above limited warranty, as purchaser's sole and exclusive remedy Lansinoh will repair or, at the option of Lansinoh, replace this product without charge for such replacement or parts or labor.

NOTE: The purchaser shall bear all expense for returning this product to Lansinoh. This warranty does not apply to any product that has been subjected to misuse, abuse, or alteration.

Only Lansinoh® brand replacement parts are recommended for use with Lansinoh® breastfeeding products. Improper or incorrectly performed maintenance or repair, or use of non-Lansinoh® brand replacement parts may invalidate this warranty.

Warranty

TO THE EXTENT PERMITTED BY LAW, LANSINOH° SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES INCLUDING, BUT NOT LIMITED TO, REPLACEMENT COSTS RESULTING FROM THE BREACH OF ANY WRITTEN OR IMPLIED WARRANTY.

If you wish to make a claim under this warranty, you must return the product to Lansinoh Laboratories Inc., prepaid, together with your dated bill of sale or other dated proof of purchase and a brief statement of the problem, along with a Replacement Authorization (RA) number. You may obtain the appropriate Replacement Authorization number and shipping address by calling the phone number or sending an email to the email address provided below.

Items returned without an associated Replacement Authorization Number will be returned to sender.

To obtain the address to Return Goods or a Replacement Authorization Number:

800-292-4794

[e-mail]

Submit warranty card online at Lansinoh.com/warranty to receive an exclusive offer.

Declaration for Electromagnetic Compatibility (EMC)

For information use only

FCC Statement:

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation."

Wireless Statement:

Wireless communications equipment such as wireless home network devices, mobile phones, cordless telephones and their base stations, walkie-talkies can affect this equipment and should be kept at least a distance 3.5m away from the equipment.

Stacking:

This device should not be used adjacent to or stacked with other equipment. And if adjacent or stacked use is necessary, this device should be observed to verify normal operation in the configuration in which it will be used.

Manufacturer: Lansinoh Laboratories Saglik Gerecleri Tasarim San.Tic. Ltd. Sti. A.O.S.B-10006 Sok.No:64 35620 Cigi / Izmir/ Turkey

Lansinoh.

Felicitations!

Source: La Leche League International, 2012