40.801B - Scale Beper - Free user manual and instructions

Frequently Asked Questions - 40.801B Beper

USER MANUAL 40.801B Beper

For further information and/or for instructions for use in other languages, please visit: www.beper.com

AVVERTENZE GENERALI

This scale's weighing is quick and precise. It is one of your perfect household articles with its high reliability, long durability and low energy consumption.

Cautions

The scale will be slippery when it is wet. Keep it dry!

This product can only be used by static pressure. To avoid breaking by striking, shocking or dropping. Clean your scale with a damp cloth but avoid water getting inside the scale. Do not use chemical cleaning agents. The scale should not be soaked by water.

Keep your scale in a cool place with dry air instead of humid or hot place.

Keep the scale in horizontal position.

This scale can only be used for weighing human body. Do not use it for commercial purpose.

Treat your scale carefully. Do not drop it or jump on it.

Operation

The scale should be placed on a hard flat surface. Never touch any other object.

Step directly on the glass surface of the scale, it will appear "HI" on LCD until a stable reading is displayed. Otherwise you can tap the surface till LCD displays "0.0" then step on for weighing operation.

Put your feet evenly on the glass surface without moving and wait or impact your weighing accuracy. If you remain standing on the scale after your weight has shown, your weight will continue to display for 10 seconds and then turn off automatically.

If you step off of the scale immediately after your weight has displayed, your weight will continue to display for 3 seconds before returning to zero and then turn off automatically.

While the scale is turn off, turn the scale over and press the only switch located on the back of it. The scale will choose and remember weighing unit "kg"- "lb"- and "st" in turn.

NOTE: IF NOT IN USE FOR LONG TERM, MAKE SURE NO OBJECTS ON THE SURFACE OF THE SCALE THEN TAP ON THE LOWER CORNER OF THE SCALE. THE SCALE WILL CALIBRATE THE ZERO POINT TILL "0.0" APPEARANCE.

Specifications

Capacity:150kg

Division : 100g

Reliable 6mm

Power supply: 1x 3V lithium cells

Low power indicator: (Loo)

Over load indicator : (Err)

Automatic switch off

For any improvement reasons, Beper reserves the right to modify or improve the product without any notice.

DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment.

The crossed out "wheeled bin" symbol

on the product reminds you of your obligation,

that when you dispose of the appliance, it must be separately collected.

GUARANTEE CERTIFICATE

This appliance has been checked in the factory. From the date of original purchase a 24 month guarantee applies to material and production defects. The purchase receipt and the guarantee certificate must be submitted together in case of claim to guarantee.

For any technical assistance, please contact directly the seller or our head office in order to preserve the appliance's efficiency and NOT TO void the guarantee. Any intervention on this appliance by non-authorized persons will automatically void the guarantee.

Guarantee conditions

If the appliance shows defects as a result of faulty material and/or production during the period of guarantee, we guarantee repair free of charge on condition that:

• The appliance has been used properly and for the purpose for which it has been intended.
• Repairs are professionally carried out by qualified persons who are appointed by the supplier.
• The purchase receipt shall be presented.
• The appliance showing a fair wear and tear shall not be covered by this guarantee.

Therefore, any part that could be accidentally broken or having visible signs of use in consumable products (such as lamps, batteries, heating elements...) is excluded from the guarantee, and any defect whatsoever resulting from non-respect of the rules for use, negligence in usage and/or maintenance of the appliance, damage during transport and any other damage not attributable the supplier.

For every defect that could not be repaired within the guarantee period, the appliance will be replaced free of charge.

Technical assistance

Even after the guarantee period we will always pay attention to repairs for defected appliances. For technical assistance and/or repairs after the guarantee period you can directly contact the below address:

CONTACT YOUR DISTRIBUTOR IN YOUR COUNTRY OR AFTER SALES DEPARTMENT

BEPER. E-MAIL [e-mail]

WHICH WILL FORWARD YOUR ENQUIRIES TO YOUR DISTRIBUTOR.

Important

Assistance technique