BS 1273 - Vacuum Cleaner CLATRONIC - Free user manual and instructions

USER MANUAL BS 1273 CLATRONIC

Black and white photo of a compact vacuum cleaner with attached circuit breaker (no visible text or symbols)

CE

BODENSTAUBSAUGER

Stofzuiger • Aspirateur-traîneau • Aspiradora • Aspirador • Aspirapolvere a carrello • Gulvstøvsuger Floor-type vacuum cleaner • Odkurzacz • Porszívó • Vysavač kobercú • Пылесос

BS 1273

DEUTSCH

NORSK

Inhalt

Overview of the Components ...... Page 3

Instruction Manual Page 32

Technical Data...... Page 34

Guarantee Page 35

FRANÇAIS

JEZYK POLSKI

Sommaire

Labeled diagram of a vacuum cleaner with numbered parts for identification and assembly reference.

Line drawing of a hand holding a syringe, no text or symbols present

Düsenaufsätze

Close-up of a hand holding a black plastic bag attached to a gray container (no visible text or symbols)

Abb. 2

Close-up of hands holding a mechanical component with visible teeth and a curved blade (no text or symbols)

Close-up of a black plastic cylindrical device with a curved top and central base (no visible text or symbols)

Motorschutzfi Iter

(im Staubbehälter)

Simple line drawing of a faucet and a small device under a sun (no text or symbols)

3D rendered mechanical component with a central circular feature and an arrow indicating direction (no text or symbols)

Front view of a white industrial vacuum cleaner with ventilation slots and control panel (no visible text or symbols)

3. Auslassfi Iter

Line drawing of a hand holding a syringe, no text or symbols present

Mondstukken

Close-up of a hand holding a small electronic device next to a dark surface (no visible text or symbols)

Afb. 2

Close-up of hands holding a mechanical component with a grid-patterned lid (no visible text or symbols)

Stofopvangbak legen

Close-up of a black plastic mechanical component with a circular top and cylindrical base (no visible text or symbols)

3D rendered model of a mechanical component with a central circular feature and an arrow indicating direction (no text or symbols)

2. Inlaatfi Iter

Front view of a white industrial vacuum cleaner with ventilation grille and control panel (no visible text or symbols)

3. Uitlaatfi Iter

Line drawing of a hand holding a syringe, no text or symbols present

Embouts

Close-up of a hand holding a vacuum cleaner's lid, no visible text or symbols

Close-up of hands holding a mechanical component with circular components (no visible text or symbols)

Illustr. 3

Close-up of a black plastic mechanical component with a circular top and cylindrical body (no visible text or symbols)

3D rendered mechanical component with a central circular feature and an arrow indicating direction (no text or symbols)

Illustr. 5

Front view of a white industrial vacuum cleaner with ventilation grille and control panel (no visible text or symbols)

Line drawing of a hand holding a syringe, no text or symbols present

Boquillas

Close-up of a hand holding a small object over a surface, possibly a vacuum cleaner or industrial component (no visible text or symbols)

Imagen 2

Close-up of hands holding a mechanical component with a grid-patterned lid (no visible text or symbols)

Close-up of a black plastic mechanical component with a circular top and cylindrical base (no text or symbols visible)

Imagen 4

3D rendered model of a human torso with a black circular feature and an arrow pointing to it (no text or symbols)

Front view of a gray vacuum cleaner with ventilation grille and control panel (no visible text or symbols)

3. Filtro de salida

Line drawing of a hand holding a syringe, no text or symbols present

Bocais

Close-up of a hand holding a vacuum cleaner's lid, no visible text or symbols

Close-up of hands holding a mechanical component with a grid-patterned head (no visible text or symbols)

Black plastic cylindrical device with a curved top and base, no visible text or symbols

3D rendered mechanical component with a central circular feature and an arrow indicating direction (no text or symbols)

Front view of a white industrial vacuum cleaner with ventilation grille and control panel (no visible text or symbols)

3. Filtro de saída

Line drawing of a hand holding a syringe, no text or symbols present

Bocchette

Close-up of a hand holding a vacuum cleaner's lid, no visible text or symbols

Close-up of hands holding a mechanical component with visible gears and blades (no text or symbols)

Fig. 3

Close-up of a black plastic cylindrical object with a curved top and side protrusions (no visible text or symbols)

3D rendered mechanical component with a central circular feature and an arrow indicating direction (no text or symbols)

Fig. 5

Front view of a white industrial vacuum cleaner with ventilation slots and control panel (no visible text or symbols)

Line drawing of a hand holding a pen or ruler, no text or symbols present

Munnstykkeelement

Close-up of a hand using a tool to lift a cylindrical object into a container (no visible text or symbols)

III.2

Close-up of hands operating a mechanical component with a curved handle (no visible text or symbols)

III. 3

Mechanical component with a cylindrical base and flange, no visible text or symbols

3D rendered model of a human torso with a black circular object and an arrow pointing to it (no text or symbols)

III. 5

Front view of a white industrial vacuum cleaner with ventilation grille and control panel (no visible text or symbols)

2. Innsugingsfi Iter

General Safety Instructions

Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing. If you give this device to other people, please also pass on the operating instructions.

• The appliance is designed exclusively for private use and for the envisaged purpose. This appliance is not fit for commercial use. Do not use it outdoors. Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the appliance with wet hands. If the appliance is humid or wet, unplug it immediately.
• When cleaning or putting it away, switch off the appliance and always pull out the plug from the socket (pull on the plug, not the cable) if the appliance is not being used and remove the attached accessories.
• Do not operate the machine without supervision. If you should leave the workplace, always switch the machine off or remove the plug from the socket (pull the plug itself, not the lead).
• Check the appliance and the cable for damage on a regular basis. Do not use the appliance if it is damaged.
• Do not try to repair the appliance on your own. Always contact an authorized technician. To avoid the exposure to danger, always have a faulty cable be replaced only by the manufacturer, by our customer service or by a qualified person and with a cable of the same type.
• Use only original spare parts.
• Pay careful attention to the following "Special Safety Instructions".

Children and Frail Individuals

- In order to ensure your children's safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.

WARNING!

Caution! Do not allow small children to play with the foil as there is a danger of suffocation!

- In order to protect children or frail individuals from the hazards of electrical equipment, please ensure that this device is only used under supervision. This device is not a toy. Do not allow small children to play with it.

Special Safety Instructions

• Do not suck up liquids!
• Do not suck up hot ashes or pointed or sharp objects!
• Do not use the appliance in humid rooms!
• Never use without the filter. Check that the filter is inserted correctly!
• hair, clothing and body parts away from the vacuum nozzle during use!
• Keep the vacuum cleaner away from sources of heat like radiators, ovens, etc.!

• When the door is closed the cable must not be trapped or pulled along sharp edges or corners.

• Do not roll over the cable with the vacuum cleaner.

• The device must not be used to vacuum up broken glass, small toys, needles, paper clips, hot ash, burning cigarette ends or matches etc.

Overview of the Components

1	Air	slide
2	Hose	connection
3 Vacuum power regulator
4	Carrying	handle
5	Cable-winding	key
6	On/off	switch
7	Parking	assistance

8 Cover of outlet filter
9 Button for releasing the new dust container
10 Dust container with motor protection filter
11 Hook on the suction tube

12 Floor nozzle

13 Telescopic suction tube

14 Accessory holder

Accessories

15	Parquet	brush
16	Turbo	brush
17	Brush	nozzle
18	Crevice	nozzle
19	Upholstery	nozzle

Start-up

• Insert the connection head of the suction hose into the hose connector until it locks in place. To do so, please press the buttons simultaneously. In order to release the hose again, please press the buttons once more on the connection head.
• Keep the buttons pressed down and then pull out the hose.
• Insert the vacuum tube into the handle if required.

Using the Appliance

1. Fit on the accessory.
2. Unwind the necessary length of cable and insert the plug in a duly installed 230 V/50 Hz protective contact socket.
3. Set the vacuum power with the vacuum power regulator (Min to Max).
4. Vacuum at a steady speed. There is no need to exert pressure.

Attention: pay attention to the range that can be covered with the cable length.

Vacuum power regulator

Low vacuum power: For curtains and delicate fabrics Medium vacuum power: For long-pile velour carpets and textile flooring

High vacuum power: For sturdy rugs and floors

Cable winding device

Pull out the cable up to the maximum length indicated with the yellow mark. Never pull the cable out up to the red mark as the cable winding can be damaged. Said damages are not covered by the warranty.

Winding

Press the cable winding button and guide the cable. Hold the cable to avoid wrapping.

Telescope Vacuum Pipe

The height-adjustable vacuum pipe enables individual alignment to your height.

Unlock the coupling by pressing the key in the direction of the arrow.

Slide the vacuum pipe to the desired length. To lock the device, release the key until you hear it lock in place.

Line drawing of a hand holding a syringe, no text or symbols present

Nozzle accessories

Groove and brush nozzle:

For vacuuming upholstery, curtains and in corners and crevices etc.

Upholstery nozzle: For cleaning upholstery, curtains etc.

Floor nozzle: To clean carpets or smooth surfaces.

Smooth floors:

Press down the lever with the brush symbol, "with your foot.

The brush is now visible..

Carpets:

Move the lever with your foot to the "symbol."

Parquet brush: The floor nozzle is fitted with rollers for improved manoeuvrability. For large areas such as parquet, laminate or tiles etc.

Turbo brush: The floor nozzle is fitted with rollers for

improved manoeuvrability. The brush is equipped with a rotating and swivelling brush roller driven by the air current.

Removes ground-in dirt, animal hairs, threads and fl uff particularly thoroughly. The carpet pile is brushed up to look almost new.

Move the switch on the brush to Symbol A in order to increase the quantity of suction air. In the case of symbol (B) this is correspondingly less. This increases the suction power.

Please note that the turbo brush is not suitable for smooth floors, e.g. parquet, laminate etc. as the surface might be damaged.

Releasing the nozzles: Pull these off while turning slightly.

Air Slide

Open the air slide on the hose handle in order to regulate the airflow or to clear any particles sticking to the nozzle.

Filter

Your machine has three fi liter systems. The traditional dust bag system has been replaced by a transparent dust container. In this, coarse dirt particles and tiny particles floating in the air are swirled out of the suction air by the high speed of the air current.

It is therefore unnecessary to buy dust bags.

Once the dust level has reached the MAX mark on the dust container, or the suction power of the vacuum cleaner is reduced, please proceed as follows:

III. 1

Close-up of a hand holding a vacuum cleaner's lid, no visible text or symbols

III. 2

Close-up of hands holding a mechanical component with circular features (no visible text or symbols)

III. 3

Close-up of a cylindrical mechanical component with a flanged top and base, no visible text or symbols.

Emptying the Dust Container

- Press the button to release the dust container and remove it from the vacuum cleaner.

- Pull the filter insert out carefully by the two retainers. Move the dust container to a vertical position if necessary.

- Empty the contents of the dust container. Then put the fi Iter insert back in position. Please ensure that the fi Iter insert is reinstalled firmly in an upright position.

Attach the dust container again by locking it in position.

1. Motor Protective Filter (in the Dust Container)

Cleaning the Filter Element

• Press the button to release the dust container and then remove it (see illustration 1).
• Empty the contents of the dust container (see Illustration 2). Unlock the fi lter insert by turning it a short distance in a clockwise direction (see Illustration 3). In the second step the fi lter insert can be pulled out towards the bottom. Clean the motor protection fi lter by tapping and gently brushing out.
• Now replace the components.
• Attach the dust container again by locking it in position.

Simple line drawing of a faucet and a small water tank under a sun (no text or symbols)

III. 4

3D rendered mechanical component with a central circular feature and an arrow indicating direction (no text or symbols)

III. 5

Front view of a white industrial vacuum cleaner with ventilation grille and control panel (no visible text or symbols)

Every third time the dust container is emptied, or in the case of severe soiling, clean the filter by allowing water to flow through the filter fabric against the direction in which the vacuum cleaner blows. The dust container should only be reinserted when it is completely dry!

Now place this back in position once it has completely dried!

Caution: Never wash the fi Iter in the washing machine, and please do not use a hairdryer to dry it.

2. Inlet fi Iter

The inlet fi liter is to be found in the dust fi liter compartment - see the arrow. Press the button to release the dust container and then remove it. Pull the fi liter out towards the front. Clean the inlet fi liter approximately every tenth time the dust container is emptied, or more frequently if necessary. Please ensure that the fi liter is always clean, as otherwise air circulation cannot be guaranteed. If necessary, the fi liter can also be washed in warm water without any additives. Place it back into place only once it is completely dry!

3. Outlet fi Iter

The appliance is also equipped with an outlet fi liter. In order to ensure that the fi liter works correctly, we recommend that you replace it every six months. It is located on the rear part of your appliance behind a ventilation grid. Open the ventilation grille by pressing the lever on its side. Then pull the grille out towards the front. Remove the fi liter and clean as described above. Fit the fi liter back into place and close the ventilation grid by following the steps above in the opposite order.

Important note!

Cleaning may become necessary after a shorter time, depending on the conditions of use, e.g. when vacuuming fi ne dust. If the suction power of your vacuum cleaner diminishes please clean the fi Iters as described. If the suction power suddenly diminishes during operation this may be due to the fi Iters being locked.

Cleaning and storage

Cleaning

• Pull the plug out of the socket before cleaning!
• Clean the casing with a dry cloth.
• Clean the motor protection fi liter approximately every 3. time the vacuum cleaner is emptied. Clean the fi liter in hot water without additives. Put it back into place only once it is completely dry.

Storage

• Let the iron cool down completely.
  • Wind the cable completely.
• Please position the device horizontally and insert the hook on the telescopic tube into the parking aid (7) on the back of the device.

Troubleshooting

• The Device Does Not Work.

Remedy:

Check the connection to the mains.

Check the position of the switch.

• The device does not suck up anything.

Possible Cause:

The dust container or the filters are dirty.

Remedy:

Empty or clean the components.

Possible Cause:

There is a foreign body in the suction tube or the nozzle.

Remedy:

Check the accessories for foreign bodies.

Noise development

The sound pressure level in the ear of an operator (LpA) was measured according to DIN EN ISO 3744. Sound pressure level detected: 78.0 dB(A) (no limit)

Technical Data

Model: BS 1273

Power supply: 220-240 V, 50/60 Hz

Power consumption:

Pnom.: 1800W

P_max. 2300 W

Protection class: II

Net weight: 5.85 kg

This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations.

Subject to technical changes without prior notice!

Guarantee

The device supplied by our company is covered by a 24-month guarantee starting on the date of purchase (receipt).

During the life of the guarantee any fault of the device or its accessories ascribable to material or manufacturing defects will be eliminated free of charge by repairing or, at our discretion, by replacing it. The guarantee services do not entail an extension of the life of the guarantee nor do they give rise to any right to a new guarantee!

Proof of the guarantee is provided by the proof of purchase. Without proof of purchase no free replacement or repair will be carried out.

If you wish to make a claim under the guarantee please return the entire machine in the original packaging to your dealer together with the receipt.

Defects to consumables or parts subject to wearing as well as cleaning, maintenance or the replacement of said parts are not covered by the guarantee and hence are to be paid!

The guarantee lapses in case of unauthorized tampering.

After the Expiry of the Guarantee

After the expiry of the guarantee repairs can be carried by the competent dealer or repair service against the payment of the ensuing costs.

Meaning of the "Dustbin" Symbol

Protect our environment: do not dispose of electrical equipment in the domestic waste.

Please return any electrical equipment that you will no longer use to the collection points provided for their disposal.

This helps avoid the potential effects of incorrect disposal on the environment and human health.

This will contribute to the recycling and other forms of reutilisation of electrical and electronic equipment.

Information concerning where the equipment can be disposed of can be obtained from your local authority.

Line drawing of a hand holding a syringe, no text or symbols present

Końcówki odkurzacza

Close-up of a hand using a handheld vacuum cleaner to clean or store air (no visible text or symbols)

Close-up of hands holding a mechanical component with no visible text or symbols

Rys. 3

Close-up of a black plastic cylindrical object with a curved top and small protrusions (no visible text or symbols)

3D rendered model of a human torso with a black circular object and an arrow pointing to it (no text or symbols)

Rys. 5

Front view of a white industrial vacuum cleaner with ventilation grilles and a control panel (no visible text or symbols)

2. Filtr wlotowy

Line drawing of a hand holding a syringe (no text or symbols)

Nástavce

Close-up of a hand holding a vacuum cleaner's lid, no visible text or symbols

Close-up of hands operating a mechanical device with a grid-patterned casing (no visible text or symbols)

Close-up of a black plastic cylindrical object with a curved top and small protrusions (no text or symbols visible)

Simple line drawing of a faucet and a smartphone under a sun (no text or symbols)

3D rendered mechanical component with a central circular feature and an arrow indicating direction (no text or symbols)

Pozor:

Front view of a white vacuum cleaner with ventilation grille and control panel (no visible text or symbols)

Line drawing of a hand holding a syringe, no text or symbols present

Szívófejek

Close-up of a hand holding a vacuum cleaner's lid, no visible text or symbols

A porgyújtő ürítése

Close-up of hands holding a mechanical component with no visible text or symbols

Close-up of a cylindrical mechanical component with a flanged top and base, no visible text or symbols.

3D rendered model of a mechanical component with a central circular feature and an arrow indicating direction (no text or symbols)

2. Beszívófi Iter

Front view of a white industrial vacuum cleaner with ventilation grilles and control panel (no visible text or symbols)

3. Kibocsátófi Iter

Line drawing of a hand holding a syringe, no text or symbols present

Сопла-насадки

Close-up of a hand cleaning a car airbag (no visible text or symbols)

Close-up of a hand holding a mechanical component with a grid-patterned lid (no visible text or symbols)

Black plastic cylindrical device with a curved top and base, no visible text or symbols

Simple line drawing of a faucet and a small object under a sun (no text or symbols)

3D rendered model of a human torso with a black circular object and arrow indicating a specific area (no text or symbols)

Рис. 5

Front view of a white industrial vacuum cleaner with ventilation grille and control panel (no visible text or symbols)

2. Входной фильтр