DO443BL - Blender DOMO - Free user manual and instructions

USER MANUAL DO443BL DOMO

PRODUCT OF LINEA 2000

GARANTIEVOORWAARDEN

CONDITIONS DE GARANTIE

This appliance has a two year warranty period. During this period the manufacturer is responsible for any failures that are the direct result of construction failure. When these failures occur the appliance will be repaired or replaced if necessary. The warranty will not be valid when the damage to the appliance is caused by wrong use, not following the instructions or repairs executed by a third party. The guarantee is issued with the original till receipt. All parts, which are subject to wear, are excluded from the warranty.

If your device breaks down within the 2-year warranty period, you can return the device together with your receipt to the shop where you purchased it.

CONDICIONES DE GARANTÍA

RECYCLAGE-INFORMATIE

RECYCLING INFORMATIONEN

RECYCLING INFORMATION

This symbol on the product or on its packaging indicates that this product may not

be treated as household waste. Instead it must be brought to the applicable collection point for recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

The packaging is recyclable. Please treat package ecologically.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person in order to avoid a hazard.

This appliance may be used by children from the age of 8 and up, and also by persons with a physical or sensorly limitation, as well as mentally limited persons or persons with a lack of experience and knowledge. But only on the condition that these persons have received the necessary instructions on how to use this appliance in a safe way and know the dangers that can occur by using this appliance.

Children cannot be allowed to play with the appliance. Maintenance and cleaning of the appliance may not be done by children, unless they are older than 8 years old and are under supervision. Keep the appliance out of reach of children younger than 8 years old.

This appliance is suitable to be used in a household environment and in similar surroundings such as:

• Kitchen for personnel of shops, offices or other similar professional surroundings
  Farms
• Hotel or motel rooms and other surroundings with a residential character
  Guest rooms or similar

Attention: This appliance cannot be used with an external timer or a separate remote control.

• Read all instructions before use.
• Before use, check if the voltage stated on the appliance corresponds with the voltage of the power net at your home.
• Do not let the cord hang on a hot surface or on the edge of a table or counter top.
• Never use the appliance when the cord or plug is damaged, after malfunction or when the appliance itself is damaged. In that case, take the appliance to the nearest qualified service center for check-up and repair.
• Close supervision is necessary when the appliance is used near or by children.
• The use of accessories that are not recommended or sold by the manufacturer can cause fire, electrical shock or injuries.
• Unplug the appliance when it is not in use, before assembling or disassembling any parts and before cleaning the appliance. Put all buttons and knobs into the 'off' position and unplug the appliance by grasping the plug. Never unplug by pulling the cord.
• Do not leave a working appliance unattended.
• Never place this appliance near a gas stove or electrical stove or in a place where it may come into contact with a warm appliance.
• Do not use the appliance outdoors.
• Only use the appliance for its intended use.

• Always use the appliance on a steady, dry and level surface.

• Avoid contact with moving parts.

• Do not put hands or utensils into the jar while mixing. This could cause serious injuries and/or serious damage to your appliance.
• Never place the blade assembly onto the blender without the jar well attached to it.
• When you want to remove the jar from the motor unit, always wait until the blades have fully stopped spinning.
  Always use the blender with the lid on.
• The blades are sharp. Be very careful.
• Never use the appliance when the jar is empty. Never use boiling liquids in the blender.
• Make sure that the blender is turned off (position 0) before plugging in the blender.
• The blender only works when the appliance is assembled properly and if the jar with the blade assembly attached to it is well mounted onto the motor unit.

PARTS

1. Lid with fill opening
2. Jar
3. Sealing ring
4. Blade assembly
5. Base of the jar
6. Motor unit
7. Speed knob with pulse function (P)

BEFORE THE FIRST USE

1. Take the appliance out of the packaging
2. Disassemble the different parts of the appliance and clean all removable parts according to the instructions described in the section 'Cleaning and maintenance'.

3. Reassemble all parts when they are dry:

4. Place the sealing ring at the inner edge of the blade assembly.

5. Place the blade assembly with the sealing ring in the base of the jar.
6. Make sure that the blender is turned off (position 0) and that the plug is not plugged in.
7. Place the jar into the base of the jar and turn the base clockwise to fasten it onto the jar.
8. Place the jar with its base into the opening at the top of the motor unit.
9. Press the lid onto the jar after adding the ingredients.

USING THE BLENDER

1. Peal the fruit or vegetables and cut them into pieces.
2. Put all foods that are to be blended into the jar. It is recommended to also always add pure water to facilitate a smooth operation of the blender. The ideal proportion of food/water is 2 to 3. The content of the jar should not exceed the maximum indication on the jar.

Caution: Never use boiling liquids or do not use the blender when the jar is empty.

1. Place the lid onto the jar.
2. Plug in the blender.
3. Turn the speed knob to the required speed.

1 - low: for light use with liquids.
2 - high: for a more solid consistency - for mixing liquids and solid foods.

P - pulse: for crusing ice, for mixing solid ingredients or thick liquids and for short, powerful blending

1. For quick and accurate blending, turn the speed knob to the P position and hold for a few seconds. When you release the knob, it will automatically reset itself to the 0 position. You can do this a few times in a row, until the desired consistency has been reached.
2. If you want to add liquid ingredients while you are blending, pour these ingredients in the jar through the fill opening in the lid.
3. When crushing ice or blending hard foods, keep 1 hand firmly onto the lid.
4. Turn off the blender by setting the speed knob to 0.
5. Remove the jar from the motor unit.
6. Unplug the blender after use.

Caution: For each use, the consecutive operation time should not exceed 3 minutes. Between two continuous cycles at least 1 minute resting time should be maintained. The appliance needs to cool down sufficiently before starting the next blending cycle.

IMPORTANT TIPS

• When blending solid foods with liquids, first pour the liquid into the jar and only then add the solid foods. Start with a limited amount of liquid and gradually add more liquid while blending through the fill opening in the lid.
• Be careful when blending warm liquids.
• Cut solid foods into pieces first and start with blending a small amount. Gradually add more pieces.

CLEANING AND MAINTENANCE

1. Pour some warm soapy water into the jar and turn the speed knob for a few seconds to the P position. Empty the jar.
2. Unplug the blender before continuing with cleaning.
3. Always clean the blender immediately after us for easy cleaning. Do not let food

dry in the jar or the blade assembly, this will make them harder to clean.

1. Disassemble the removable parts. Loosen the blade assembly from the bottom of the jar and remove the blade assembly and the sealing ring. Also remove the lid from the jar.
2. Clean the lid, the sealing ring and the jar by hand or in the dishwasher and dry.
3. Clean the blades with some warm soapy water and rinse under the tap. Do not touch the blades and be extra careful. Do not immerse the blade assembly in water. Let the blade assembly dry upside down, out of reach of children.
4. Wipe the motor unit clean with a damp cloth and dry thoroughly. Remove stubborn stains by scrubbing with a non-abrasive cleaner. If liquids spill onto the motor unit, unplug the blender, wipe the motor unit clean with a damp cloth and dry thoroughly.

Caution:

• Never immerse the motor unit in any liquid to avoid the risk of electrical shock.
• Do not use any rough scouring pads or cleaners on the parts or on the finish of the appliance.

PRECAUCIONES IMPORTANTES