USER MANUAL Piram Frame CYBEX
natural_image
Line drawing of a stroller with wheels and handlebars (no text or symbols)


text_image
clickclick
④

text_image
click
2x
⑤

natural_image
Line drawing of a stroller with wheels and a handle, no text or symbols present

text_image
a
2x
b
2x
c
2x
⑦

natural_image
Line drawing of a two-wheeled baby stroller with wheels and handle (no text or symbols)

text_image
PRIAM
CARRY COT
PRIAM
2-in-1 UNIT
PRIAM
LUX SEAT


text_image
click
①

text_image
click
②

natural_image
Mechanical diagram showing a bicycle wheel connected to a lock and belt switch (no text or symbols)

text_image
click
②

text_image
Diagram illustrating bicycle seatbelting mechanism with lock and padlock symbols


text_image
QFiber
a
b
①

natural_image
Line drawing of a two-wheel stroller with wheels and a lock icon, no text or symbols present

natural_image
Diagram of a mechanical lift with wheels and lock mechanism, showing motion arrows (no text or symbols)

natural_image
Diagram of a two-wheeled bicycle with wheels and a lock mechanism, showing rotational motion (no text or symbols)


text_image
Diagram illustrating vehicle seat assembly with labeled parts and directional arrows, including section a and section b.

text_image
Technical diagram showing car wheel assembly with labeled parts (a) and (b), including a close-up view of the steering wheel.


natural_image
Diagram of a two-wheel bicycle with wheels and a lock mechanism, showing directional arrows (no text or symbols)


text_image
2x
a
b
3

text_image
Diagram illustrating a hand tool manipulation technique with labeled parts and directional arrows

natural_image
Two identical illustrations of a baby stroller with wheels, marked with red X symbols (no text or labels present)



text_image
a
b
c
click
①

text_image
Technical diagram showing two different stroller configurations labeled a and b, with arrows indicating motion direction.


text_image
a
b
c
click
①

text_image
a
b
②

natural_image
Line drawing of a wheeled cart with wheels and handle (no text or symbols)

natural_image
Technical illustration of a car seat assembly with a close-up detail showing the cable being inserted (no text or symbols present)
WELCOME
CYBEX PRIAM
Individualized Mobility
The requirements of a pushchair and travel system are as diverse as life itself, because when you're out and about with children, things don't always go according to plan. The PRIAM is an ideal companion because it meets all requirements right from the start.
Whether baby or infant, Light or Lux version – you'll find the right attachment for every age and every need. And regardless of which choice you make – or if the choice changes – everything will still fit on the lightweight, classic frame.

Preparing the frame 4

Attaching the infant car seat adapter 8

Using the brake 9

Adjusting the handle bar 10

Using the swivel locks 11

Removing the wheels 12

Two wheel mode (with seat) 13

Free-standing position 17

Compact fold 18
A. Handle bar
B. Adjusting the handle bar
C. Loop for hand strap (both sides)
D. Release button for two-wheel mode (both sides)
E. Adaptor seat units / carry cot (both sides)
F. Swivel lock front wheel (both sides)
G. Shopping basket
H. Front wheels
I. Rear wheels
J. Foot brake
K. Connection point Cup Holder
L. Infant car seat adapter
The CYBEX PRIAM is designed to provide maximum comfort for your child and can be supplied with either the PRIAM Carry Cot or the PRIAM Lux Seat, both of which are suitable for new born babies. If you have the PRIAM Lux Seat, it must be used in the most reclined position until your child is able to sit unaided or able to pull themselves up.
This product conforms and has been certified to standard EN 1888:2012 safety.
IMPORTANT!
KEEP FOR FUTURE REFERENCE.
Read the instructions carefully before use and keep for future reference.

WARNINGS!
• Do not leave your child unattended.
• Always use the restraint system.
- Do not let your child play with this product.
- This product is not suitable for running or skating.
- Ensure that all the locking devices are engaged before use.
- To avoid injury ensure that your child is kept away when unfolding and folding this product.
- Check that the pram body or seat unit or car seat attachment devices are correctly engaged before use.
This product has been designed to carry a child of 17 kg with a 5 kg load in the shopping basket. Always activate the brake before you place or take your child out of the pushchair.
- Do not attach any load, excluding the CYBEX Cup Holder, to the handle and/or any other part as this will affect the stability of the push chair.
- Never ascend or descend stairs or escalators with the child inside or when using other means of transportation.
• Take special care when going up or down a curb or when you maneuver on other uneven surfaces.
- When using a CYBEX infant car seat with the CYBEX PRIAM pushchair, this vehicle does not replace a cot or a bed. Should your child need to sleep, then it should be placed in a suitable pram, cot or bed.
- This product is intended only for use with one child in the seat or carry cot and a second child on the CYBEX Kid Board if purchased.
- The CYBEX Kid Board is designed for children up to 20 kg and is exclusively to be used with the CYBEX PRIAM stroller frame. Refer to the usage instructions provided with the CYBEX Kid Board.
- The maximum load for the shopping basket is 5.0 kg.
• The maximum load for the CYBEX Cup
Holder is 0.5 kg.
- The maximum load for the CYBEX Changing Bag is 2.0 kg.
- Regularly inspect your CYBEX PRIAM for any signs of wear or damaged parts and refer to the Maintenance and Cleaning instructions on page 23.
- Only use approved CYBEX accessories with the CYBEX PRIAM.
- Do not use if any part of the product is broken, torn or missing.
- Use only original CYBEX replacement parts. It may be unsafe to use substitutes.
MAINTENANCE
The user is responsible for the regular maintenance of the stroller. All connecting parts must be tight and secured properly. It is particularly important to ensure that the locking and swiveling mechanisms are treated regularly with Teflon spray (dry lubricant). It is important that brakes, wheels and tyres are not impaired during use. Inspect them regularly and repair or replace if necessary. You can also treat the other moving parts with Teflon spray (dry lubricant). After spraying on the Teflon, wipe the product with a soft cloth. The frame tubes covered by the locking mechanism and turning mechanism should also be regularly cleaned and sprayed. This will ensure that you enjoy your stroller without any problems. Do not make any modifications to the product. If you have any complaints or problems, please contact your supplier or importer. A service should be scheduled every 24 months. Use only original CYBEX replacement parts. It may be unsafe to use substitutes.
CLEANING
Do not use abrasives to clean the frame! Use a damp cloth and a mild detergent and dry thoroughly.
Should the stroller be exposed to salt water, please rinse it down with fresh (tap) water as soon as possible afterwards. Fabric covers are machine washable at max. 30°C on a delicate cycle. The canopy can be hand washed with mild detergent at max. 30°C. Please make note of the care label. Do not tumble dry. Allow covers to dry completely before re-fitting. All CYBEX fabrics have been tested, but when the stroller is very wet, the water may permeate the lining through the bottom edges and seams and leave water stains on the upholstery. We advise you to use a rain cover to avoid this. Also please do not fold or store the product while wet. If the stroller is wet, allow to dry with the canopy extended. Never store in a damp environment as this can cause mildew to form. Note! Please wash the cover separately before using it the first time. Do not tumble dry and do not expose to direct sunlight when drying! Do not iron!
WARRANTY
The following warranty applies solely in the country where this product was initially sold by a retailer to a customer. The warranty covers all manufacturing and material defects, existing and appearing, at the date of purchase or appearing within a term of two (2) years from the date of purchase from the retailer who initially sold the product to a consumer (manufacturer's warranty). In the event that a manufacturing or material defect should appear, we will – at our own discretion – either repair the product free of charge or replace it with a new product. To obtain such warranty it is required to take or ship the product to the retailer, who initially sold this product to a customer and to submit an original proof of purchase (sales receipt or invoice) that contains the date of purchase, the location of the retailer and the type designation of this product. This warranty shall not apply in the event that this product is taken or shipped to the manufacturer or any other person other than the retailer who initially sold this product to a consumer. Please check the product with respect to completeness and manufacturing or material defects immediately at the date of purchase or, in the event that the product was purchased on the internet or a web shop, immediately after receipt. In case of a defect, stop using the product and take or ship it immediately to the retailer
who initially sold it. In a warranty case the product has to be returned in a clean and complete condition. Prior to contacting the retailer, please read this instruction manual carefully. This warranty does not cover any damages caused by misuse, environmental influence (water, fire, accidents etc.) or normal wear and tear.
This warranty only applies in the event that the product was always used in compliance with the use instructions provided in this user manual, if any and all modifications and services were performed by authorized persons and if original components and accessories were used. This warranty does not exclude, limit or otherwise affect any statutory consumer rights, including claims in tort and claims with respect to a breach of contract, which the buyer may have against the seller or the manufacturer of the product.
CYBEX GMBH
Riedinger Str. 18
95448 Bayreuth / Germany
Tel. +49 921 78511-0
Fax. +49 921 78511-999
DISPOSAL
Remember to properly dispose your product.
Garbage disposal may vary in every country. Please contact your local waste management company to make sure you are taking the right steps to dispose of the product. Always follow the disposal regulations of your country.
WILLKOMMEN
CYBEX PRIAM
95448 Bayreuth / Germany
Tel. +49 921 78511-0
Fax. +49 921 78511-999
ENTSORGUNG
95448 Bayreuth / Germany
Tel. +49 921 78511-0
Fax. +49 921 78511-999
TRAITEMENT DES DÉCHETS
95448 Bayreuth / Germany
Tel. +49 921 78511-0
Fax. +49 921 78511-999
ELIMINACIÓN
95448 Bayreuth / Germany
Tel. +49 921 78511-0
Fax. +49 921 78511-999
ELIMINAÇÃO
95448 Bayreuth / Germany
Tel. +49 921 78511-0
Fax. +49 921 78511-999
SMALTIMENTO
95448 Bayreuth / Germany
Tel. +49 921 78511-0
Fax. +49 921 78511-999
VERWIJDERING
95448 Bayreuth / Germany
Tel. +49 921 78511-0
Fax. +49 921 78511-999
UTYLIZACJA
95448 Bayreuth / Germany
Tel. +49 921 78511-0
Fax. +49 921 78511-999
LIKVIDACE
95448 Bayreuth / Germany
Tel. +49 921 78511-0
Fax. +49 921 78511-999
LIKVIDÀCIA
95448 Bayreuth / Germany
Tel. +49 921 78511-0
Fax. +49 921 78511-999
ODLAGANJE IZRABLJENEGA IZDELKA
95448 Bayreuth / Germany
Tel. +49 921 78511-0
Fax. +49 921 78511-999
ÁRTALMATLANÍTÁS
95448 Bayreuth / Germany
Tel. +49 921 78511-0
Fax. +49 921 78511-999
BORTSKAFFNING
DETTE PRODUKT ER GODKJENT I HENHOLD TIL EN 1888:2012.
VIKTIG!
GJEM FOR FREMTIDIG REFERANSE.
95448 Bayreuth / Germany
Tel. +49 921 78511-0
Fax. +49 921 78511-999
BORTSKAFFELSE
95448 Bayreuth / Germany
Tel. +49 921 78511-0
Fax. +49 921 78511-999
HÄVITTÄMINEN
DETTE PRODUKT ER GODKENDT I HENHOLD TIL EN 1888:2012.
VIGTIGT!
GEM TIL FREMTIDIG REFERENCE.
95448 Bayreuth / Germany
Tel. +49 921 78511-0
Fax. +49 921 78511-999
BORTSKAFFELSE
Husk at bortskaffe dit produkt korrekt.
Bayreuth / Germany 95448
Tel. +49 921 78511-0
Fax. +49 921 78511-999
7170
natural_image
Line drawing of a compass tool with no text or symbols

text_image
Diagram illustrating a person using a manual bicycle leg mechanism with labeled motion arrows and figure number 2

text_image
θopter
a
b
3

text_image
Technical diagram of a two-wheeled cart with labeled parts and exploded view details