KDFX 6033 - Dishwasher KITCHENAID - Free user manual and instructions

Product type	Fully integrated dishwasher
Brand	KitchenAid
Model	KDFX 6033
Capacity	13 place settings
Energy class	D
Water consumption per cycle	9.5 L
Electricity consumption per cycle	0.92 kWh
Noise level	46 dB(A)
Dimensions (H x W x D)	85 x 60 x 60 cm
Weight	45 kg
Power supply	220-240 V ~ 50 Hz, 10 A
Number of programs	6
Available programs	Intensive, Eco, Daily 60°, Quick 30 min, Pre-wash, Glasses
Options	Delayed start, Half load, Extra drying, Power Clean
Safety	Leak protection, Child lock, Anti-overflow system
Tub material	Stainless steel
Drying type	Condensation drying
Filter	Removable self-cleaning filter
Maintenance and cleaning	Clean regularly the filter, spray arms and seals
Spare parts and repairability	Available from KitchenAid after-sales service
Installation type	Built-in (only a door panel is required)
Color	White / Stainless steel (depending on version)

Frequently Asked Questions - KDFX 6033 KITCHENAID

How to install the KitchenAid KDFX 6033 dishwasher?

Installation must be carried out by a professional. Connect the appliance to a 220-240 V grounded outlet. Connect the cold water supply (3/4 inch) and the drain hose. Make sure the dishwasher is level.

What products can I use in the KDFX 6033?

Use only specific dishwasher products (liquid, powder or tablets). Regenerating salt is mandatory to soften water, and rinse aid improves drying.

How to load the dishes optimally?

Place plates in the lower basket tilted towards the center, glasses and cups in the upper basket. Cutlery in the cutlery drawer. Avoid blocking the spray arms. Refer to the Loading section of the manual.

What to do if the dishwasher does not start?

Check that the door is properly closed, the appliance is plugged in and the water tap is open. Press the 'On/Off' button and check that the indicators light up. If nothing happens, refer to the Troubleshooting section.

How to clean the filters of the KDFX 6033?

Remove the lower basket, unscrew the cylindrical filter and the flat filter. Rinse them under running water while brushing off residues. Reassemble. Cleaning every 15 days is recommended.

Why does the crockery remain wet after the cycle?

Check the rinse aid setting and that extra drying is activated. Use the 'Glasses' or 'Intensive drying' program if available. Open the door at the end of the cycle to speed up drying.

What do the error codes on the display mean?

Common codes: F1 (filling fault), F2 (drain problem), F3 (heating fault). Turn off the appliance, check the filters and hoses. If the code persists, contact after-sales service.

How to adjust the softener salt level?

Turn the salt reservoir cap counterclockwise. Remove it and add special dishwasher salt. Use the provided funnel. Consult the adjustment table according to the water hardness in your area.

Is it possible to replace the spray arms?

Yes, the spray arms are removable. Unclip them by turning the locking ring. Clean the nozzles with a toothpick. If necessary, order spare parts from KitchenAid.

What are the programs and their approximate duration?

Programs: Intensive (150 min), Eco (225 min), Daily 60° (60 min), Quick 30 (30 min), Pre-wash (15 min), Glasses (90 min). Durations vary depending on temperature and options.

USER MANUAL KDFX 6033 KITCHENAID

Solac is a registered Trade Mark

02/05

5-7·ESPANOL

8-10·ENGLISH

11-13 • FRANÇAIS

14-16 · DEUTsCH

17-19·PORTUGUES

20-22 • ITALIANO

23-25·NEDERLANDS

26-28·ČESKY

29-31·POLSKA

32-34·SLOVENSKY

35-38·MAGYAR

39-41·6bIrapck

42-43·HRVATSKA

· ESPÁÑOL

ATENCIón

• Read these instructions carefully before using your appliance, and keep them for future reference.
• This fan heater is an excellent source of additional heat: It should not be considered as a principal heating system.
• Before connecting the appliance, make sure that the voltage shown on the specifications plate is the same as the mains power supply at your home.
• Do not obstruct the air inlets or place any objects on top of the vents or openings of the appliance, since this could cause an electrical shock. Do not insert anything into the grill (3).
• Always use the fan heater in the horizontal position and placed on a solid, flat and horizontal surface. Do not place it on excessively soft surfaces such as a bed.
• Leave enough space around the fan heater (at least 50~cm above and to the sides, and 120~cm in front).
• Position the fan heater away from flammable materials (glues, curtains, carpet...).
• Do not place the fan heater directly underneath a mains outlet.
• Do not use your fan heater if you see that the power cord is damaged or notice any defect on the appliance. For safety reasons, take it only to an authorised technical service centre.
  Always make sure you turn off the power switch (1) and unplug the appliance from the mains when not in use.
• NEVER COVER the appliance, due to risk of fire.
• Do not place the cable under carpets or under any other kind of material.
• Do not place the appliance on top of the power cord when the appliance is hot. Do not operate the appliance with the cable wound up.
• Do not handle the appliance with wet hands.
• Do not use the appliance near a bath, shower or swimming pool or any other water container. If the fan heater falls into water, DO NOT try to take it out. Unplug it from the mains.
• Do not use the fan heater to dry clothes, do not leave furniture closer than 50~cm in front of the appliance, and do not use in rooms with less than 4m^2 of floor space.
• Keep the appliance out of the reach of children.
• IMPORTANT: When you wish to dispose of the appliance, NEVER throw it in the rubbish. Instead, go to your nearest CLEAN POINT or waste collection point, where it will receive subsequent treatment. In this way, you will be contributing to looking after the environment.

SAFETY SYSTEM

• The appliance is equipped with an OVERHEATING DISCONNECTION system. If a problem occurs, this system automatically switches off the appliance. If this happens, proceed as follows:

1) Unplug the appliance from the mains.
2) Allow it to cool for 15 minutes.
3) Ensure that there is no dust or other obstacles that obstruct the air flow.
4) Clean the intake grill (3) with a vacuum cleaner, if necessary.

• If the appliance still fails to work as normal, please contact the technical service centre.

MAIN COMPONENTS

1. Power selector control
2. Temperature regulator
3. Grill

USERINSTRUCTIONS

• Connect your fan heater to the mains.
• Turn the temperature regulator control (2) to high.

• Place the power selector control (1) in the desired position:

• Medium power

**High power

• When the room has reached the desired temperature, slowly turn the temperature regulator (2) clockwise until a soft "click" is heard. The fan heater will switch off. The appliance will switch on and off in order to maintain the right temperature in the room.
• In order to turn off the fan heater, place the power selector (1) in position 0, and disconnect the appliance from the mains.
• In order to prevent temperatures below 0^ in the room, select position * on the temperature regulator (2), and place the power selector (1) in the medium power position.

CLEANING AND MAINTENANCE

• Before cleaning the appliance, make sure it is switched off and unplugged from the mains.

• Allow it to cool.

• Clean the outside of the appliance with a dry cloth.

• To clean the interior of the appliance, periodically use a vacuum cleaner on low power.
• After each season, we recommend that you clean the appliance with a cloth and store it in its box in a dry place.
• Before each use, be sure that the appliance is in perfect condition.

FRANÇAISE

ATTENTION

MEGFELELOSESIGNYILATKOZAT

1. Regulator snage
2. Regulator temperature
3. Rešetka

UPUTSTVA ZA UPORABU