AMP16CA - Wireless pointer TARGUS - Free user manual and instructions

USER MANUAL AMP16CA TARGUS

. It offers true plug-and-play capability with no need for software drivers and the long range 2.4 GHz technology allows for effective presentations up to 15m (50 feet). System Requirements Hardware

• Wireless presenter with laser pointer

• Ultra-slim USB receiver

• User guide 3Wireless Presenter with Laser Pointer Installing The Battery If the presenter is on, slide the on/off switch located on the side of the presenter to the “off” position. Setting Up Your Wireless Presenter Insert the supplied battery, making sure the positive (+) and negative (-) ends of the battery match the polarity indicators inside the battery compartment. Slide the battery cover back into position until it “clicks” firmly into place. Turn on the presenter. Battery Cover 4Wireless Presenter with Laser Pointer Connecting The Receiver Plug the USB receiver into an open USB port on your computer. Your computer’s operating system will identify the receiver and install the default driver. 5Wireless Presenter with Laser Pointer Synchronizing Your Wireless Presenter The receiver and presenter should synch up automatically. However, in some cases they may not synchronize properly due to environmental interference or other causes. If this is the case, you must re-establish the link. Connect button 6Wireless Presenter with Laser Pointer Using Your Wireless Presenter On/Off switch Connect button Previous Page Next Page Dark screen Escape / Resume Laser button 7Wireless Presenter with Laser Pointer Safety Measures

• To avoid possible eye damage, never point the presenter’s laser at people, especially their faces, or look directly into the presenter’s laser beam.

• Avoid pointing the presenter’s laser beam at a mirror or other highly-reflective surface.

• Keep the presenter away from young children.

• Never view the presenter’s laser beam using telescopic devices, such as a microscope or binoculars.

• Any attempt to disassemble, adjust or repair the presenter may result in exposure to laser light or other safety hazards. Troubleshooting What do I do if the response time of the presenter is slow or it intermittently stops working?

• Make sure that the presenter is within 15m (50 feet) of its receiver.

• Increase the distance between the presenter’s receiver and the base units of other wireless devices.

• Turn off any wireless devices and their base units that are near the presenter’s receiver.

• Replace the battery.

• Synchronize the receiver and presenter. See “Synchronizing Your Wireless Presenter” 8Wireless Presenter with Laser Pointer Technical Support For technical questions, please visit: Internet: www.targus.com/support.asp Email: info.cn@targus.com Product Registration Targus recommends that you register your Targus accessory shortly after purchasing it. To register your Targus accessory, go to: www.targus.com/registration.asp You will need to provide your full name, email address, country of residence and product information. Warranty Targus warrants this product to be free from defects in materials and workmanship for one year. If your Targus accessory is found to be defective within that time, we will promptly repair or replace it. This warranty does not cover accidental damage, wear and tear, or consequential or incidental loss. Under no conditions is Targus liable for loss of, or damage to a computer; nor loss of, or damage to, programs, records, or data; nor any consequential or incidental damages, even if Targus has been informed of their possibility. This warranty does not affect your statutory rights. Regulatory Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003. This device has carrier frequency within 27.96-27.28MHz. This device is in compliance to RSS-310 with maximum field strength lower than 10 millivolts/m measured at 3 metres. 9Wireless Presenter with Laser Pointer FCC Statement Tested to Comply This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna;

• Increase the separation between the equipment and receiver;

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;