Ecosys M2035dn - Printer KYOCERA - Free user manual and instructions

USER MANUAL Ecosys M2035dn KYOCERA

DVD (Product Library)

SAFETY OF LASER BEAM (USA)

1. Safety of laser beam

This machine has been certified by the manufacturer to Class 1 level under the radiation performance

standards established by the U.S.DHHS (Department of Health and Human Services) in 1968. This indicates

that the product is safe to use during normal operation and maintenance. The laser optical system, enclosed

in a protective housing and sealed within the external covers, never permits the laser beam to escape.

A laser-product-related act was implemented on Aug. 2, 1976, by the Center for Devices and Radiological Health

(CDRH) of the U.S. Food and Drug Administration (FDA). This act prohibits the sale of laser products in the U.S.

without certification, and applies to laser products manufactured after Aug. 1, 1976. The label shown below indicates

compliance with the CDRH regulations and must be attached to laser products marketed in the United States. On this

machine, the label is on the rear.

When checking the optical unit, avoid direct exposure to the laser beam, which is invisible. Shown at below is the label

located on the cover of the optical unit.

For safety of the service personnel, follow the maintenance instructions in the other section of this manual.xx

Safety Instructions Regarding the Disconnection of Power (USA)

Attention : The power plug is the main isolation device! Other switches on the equipment are only functional switches

and are not suitable for isolating the equipment from the power source.

Attention: Le débranchement de la fiche secteur est le seul moyen de mettre l’appareil hors tension. Les

interrupteurs sur l’appareil ne sont que des interrupteurs de fonctionnement: ils ne mettent pas l’appareil hors tension.

Other precautions (for users in California, the United States)

This product contains a CR Coin Lithium Battery which contains Perchlorate Material - special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate

WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

• The use of a non-shielded interface cable with the referenced device is prohibited.

The changes or modifications not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules.

Operation is subject to the following two conditions; (1) this device may not cause interference, and (2) this device must accept

any interference, including interference that may cause undesired operation of the device.

* The above warning is valid only in the United States of America.

Radio Tag Technology

In some countries the radio tag technology used in this equipment to identify the toner container may be subject to authorization

and the use of this equipment may consequently be restricted.xxi

ECOSYS M2035dn/ECOSYS M2535dn

MULTIFUNCTIONAL PRODUCT LIMITED WARRANTY KYOCERA Document Solutions America, Inc. and KYOCERA Document Solutions Canada, Ltd.

(both referred to as "KYOCERA") warrant the Customer's new Multifunctional Product (referred to

as "MFP"), and the new accessories installed with the initial installation of the MFP, against any

defects in material and workmanship for a period of one year, or 200,000 copies/prints from date of

installation, whichever first occurs. In the event the MFP or an accessory is found to be defective

within the warranty period, KYOCERA's only obligation and the Customer's exclusive remedy shall

be replacement of any defective parts. KYOCERA shall have no obligation to furnish labor.

This warranty covers Maintenance Kits and the components of Maintenance Kits included with the

original MFP for a period of one year or 100,000 copies/prints, whichever first occurs. Maintenance

Kits consist of the developing unit, the drum unit, and the fixing unit. Replacement Maintenance Kits

have a 90 day Limited Warranty.

This warranty is valid only for the original retail purchaser (referred to as the "Customer") of a new

KYOCERA MFP in the United States of America or Canada, based upon the country of purchase.

In order to obtain performance of this warranty, the Customer must immediately notify the Authorized

KYOCERA Dealer from whom the product was purchased. If the KYOCERA Dealer is not able to

provide service, write to KYOCERA at the address below for the name and address of the Authorized

KYOCERA Dealer in your area, or check KYOCERA's website at

http://www.kyoceradocumentsolutions.com for KYOCERA Document Solutions America, Inc. or

http://www.kyoceradocumentsolutions.ca for KYOCERA Document Solutions Canada, Ltd.

This warranty does not cover MFPs or accessories which: (a) have become damaged due to

operator negligence, misuse, accidents, improper storage or unusual physical or electrical stress, (b)

have used parts or supplies which are not genuine KYOCERA brand parts or supplies, (c) have been

installed or serviced by a technician not employed by KYOCERA or an Authorized KYOCERA Dealer, or (d) have had the serial number modified, altered, or removed.

This warranty gives the Customer specific legal rights. The Customer may also have other rights,

which vary from state to state, or province to province. Neither the seller, nor any other person, is

authorized to extend the time period or expand this warranty on behalf of KYOCERA.

THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES AND CONDITIONS,

EXPRESS OR IMPLIED, AND KYOCERA SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY SHALL NOT EXTEND TO, AND KYOCERA SHALL NOT BE LIABLE FOR, ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES WHICH MAY ARISE OUT OF THE USE OF, OR INABILITY TO USE, THE MFP.

225 Sand Road, P.O. Box 40008

International Typeface Corporation.

Copyright (c) 1998-2006 OpenSSL Project. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the

following conditions are met:

1 Redistributions of source code must retain the above copyright notice, this list of conditions and the following

2 Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the

following disclaimer in the documentation and/or other materials provided with the distribution.

3 All advertising materials mentioning features or use of this software must display the following

“This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://

4 The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or promote products

derived from this software without prior written permission.

For written permission, please contact openssl-core@openssl.org.

5 Products derived from this software may not be called “OpenSSL” nor may “OpenSSL” appear in their names

without prior written permission of the OpenSSL Project.

6 Redistributions of any form whatsoever must retain the following acknowledgment: “This product includes

software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)”

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,

Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) Touts droits réservés.

This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written

so as to conform with Netscapes SSL.

This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The

following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the

SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that

the holder is Tim Hudson (tjh@cryptsoft.com).

Copyright remains Eric Young’s, and as such any Copyright notices in the code are not to be removed.

If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library

This can be in the form of a textual message at program startup or in documentation (online or textual) provided with

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the

following conditions are met:

1 Redistributions of source code must retain the copyright notice, this list of conditions and the following

2 Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the

following disclaimer in the documentation and/or other materials provided with the distribution.

3 All advertising materials mentioning features or use of this software must display the following

“This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)”

The word ‘cryptographic’ can be left out if the rouines from the library being used are not cryptographic related

4 If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you

must include an acknowledgement:

“This product includes software written by Tim Hudson (tjh@cryptsoft.com)”

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,

DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The licence and distribution terms for any publically available version or derivative of this code cannot be changed.

i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.]xxvii

Monotype Imaging License Agreement

1 Software shall mean the digitally encoded, machine readable, scalable outline data as encoded in a special

format as well as the UFST Software.

2 You agree to accept a non-exclusive license to use the Software to reproduce and display weights, styles and

versions of letters, numerals, characters and symbols (Typefaces) solely for your own customary business or

personal purposes at the address stated on the registration card you return to Monotype Imaging. Under the

terms of this License Agreement, you have the right to use the Fonts on up to three printers. If you need to have

access to the fonts on more than three printers, you need to acquire a multi-user license agreement which can

be obtained from Monotype Imaging. Monotype Imaging retains all rights, title and interest to the Software and

Typefaces and no rights are granted to you other than a License to use the Software on the terms expressly set

forth in this Agreement.

3 To protect proprietary rights of Monotype Imaging, you agree to maintain the Software and other proprietary

information concerning the Typefaces in strict confidence and to establish reasonable procedures regulating

access to and use of the Software and Typefaces.

4 You agree not to duplicate or copy the Software or Typefaces, except that you may make one backup copy. You

agree that any such copy shall contain the same proprietary notices as those appearing on the original.

5 This License shall continue until the last use of the Software and Typefaces, unless sooner terminated. This

License may be terminated by Monotype Imaging if you fail to comply with the terms of this License and such

failure is not remedied within thirty (30) days after notice from Monotype Imaging. When this License expires or

is terminated, you shall either return to Monotype Imaging or destroy all copies of the Software and Typefaces

and documentation as requested.

6 You agree that you will not modify, alter, disassemble, decrypt, reverse engineer or decompile the Software.

7 Monotype Imaging warrants that for ninety (90) days after delivery, the Software will perform in accordance with

Monotype Imaging-published specifications, and the diskette will be free from defects in material and

workmanship. Monotype Imaging does not warrant that the Software is free from all bugs, errors and

The parties agree that all other warranties, expressed or implied, including warranties of fitness for a particular

purpose and merchantability, are excluded.

8 Your exclusive remedy and the sole liability of Monotype Imaging in connection with the Software and

Typefaces is repair or replacement of defective parts, upon their return to Monotype Imaging.

In no event will Monotype Imaging be liable for lost profits, lost data, or any other incidental or consequential

damages, or any damages caused by abuse or misapplication of the Software and Typefaces.

9 Massachusetts U.S.A. law governs this Agreement.

10 You shall not sublicense, sell, lease, or otherwise transfer the Software and/or Typefaces without the prior

written consent of Monotype Imaging.

11 Use, duplication or disclosure by the Government is subject to restrictions as set forth in the Rights in Technical

Data and Computer Software clause at FAR 252-227-7013, subdivision (b)(3)(ii) or subparagraph (c)(1)(ii), as

appropriate. Further use, duplication or disclosure is subject to restrictions applicable to restricted rights

software as set forth in FAR 52.227-19 (c)(2).

12 You acknowledge that you have read this Agreement, understand it, and agree to be bound by its terms and

conditions. Neither party shall be bound by any statement or representation not contained in this Agreement.

No change in this Agreement is effective unless written and signed by properly authorized representatives of

each party. By opening this diskette package, you agree to accept the terms and conditions of this Agreement.xxviii

Fonction Économie d’énergie

• DVD (Product Library)

(spécification Hi-Speed USB, 5,0 m

● :Installation standard

● :Installation standard

KX Driver, Status Monitor, Fonts

programme via le Pare-feu Windows.

Monarch 3 7/8" × 7 1/2"

Enveloppe DL 110 × 220 (mm)

Enveloppe C5 162 × 229 (mm)

Executive 7 1/4" × 10 1/2"

Enveloppe #9 (Commercial #9) 3 7/8" × 8 7/8"

Enveloppe #6 (Commercial #6 3/4) 3 5/8" × 6 1/2"Préparation à l’utilisation

78 % (Legal >> Letter), 64 % (Letter >> Statement)

64 % (Letter >> Statement)

Identique org., Legal, Letter, Statement, Executive, Ofcio II,

Mémoire USB Mémoire USB

[Rect/ver ] [ Papier ]

Mémoire USB Mémoire USB

Mémoire USB Mémoire USB

Mémoire USB Mémoire USB C

Type de support Normal (105 g/m

reporter aux sections

Nbre copies/impress.

[Total] est sélectionné pour

Nbre copies/impress.

Nbre copies/impress.

[Total] est sélectionné pour

Nbre copies/impress.

Kit(B) Operation Guide.

Lettre/Symbole g h i G H I 4

Lettre/Symbole j k l J K L 5

Lettre/Symbole m n o M N O 6

Lettre/Symbole p q r s P Q R S 7

Letter, Legal, Statement, Executive,

400%, 200%, 141%, 129%, 115%, 90%, 86%, 78%, 70%, 64%, 50%, 25%

7,0 secondes maximum

Minimum : Statement/A5

KPDL (Kyocera Page Description Language)

NetBEUI (NetBIOS Extended User Interface)

TWAIN (Technology Without Any Interested Name)

WIA (Windows Imaging Acquisition)

activation/désactivation 11-2

Câble LAN Raccordement 2-5

Câble USB Raccordement 2-5

Command Center RX 2-29

annulation 3-28, 7-20

8240 NW 52nd Terrace Dawson Building, Suite 100

KYOCERA Document Solutions Brazil, Ltda.

Av.Tambore,1180 Mod.B-09 CEP 06460-000

Tambore-Barueri-SP, Brazil

Level 3, 6-10 Talavera Road North Ryde N.S.W, 2113,

1-3 Parkhead Place, Albany, Auckland 1330,

KYOCERA Document Solutions Asia Limited

16/F.,Mita Centre, 552-566, Castle Peak Road

Tsuenwan, NT, Hong Kong

Phone: +852-2610-2181

335 Ratchadapisek Road, Bangsue, Bangkok 10800,

16/F.,Mita Centre, 552-566, Castle Peak Road

Tsuenwan, NT, Hong Kong

Phone: +852-2429-7422

6F., No.37, Sec. 3, Minquan E. Rd.,

KYOCERA Document Solutions

India Private Limited

First Floor, ORCHID CENTRE Sector-53, Golf Course Road, Gurgaon 122 002,

Eldon Court, 75-77 London Road,

Phone: +33-1-69852600

KYOCERA Document Solutions

South Africa (Pty) Ltd.

KYOCERA House, Hertford Office Park,

90 Bekker Road (Cnr. Allandale), Midrand, South Africa.

KYOCERA Document Solutions Middle East

Dubai Internet City, Bldg. 17,

Office 157 P.O. Box 500817, Dubai,

United Arab Emirates