8FF3FPW - Cadre photo numérique PHILIPS - Free user manual and instructions

Find the device manual for free 8FF3FPW PHILIPS in PDF.

Page 34
View the manual : Français FR English EN
Manual assistant
Powered by ChatGPT
Waiting for your message
Product information

Brand : PHILIPS

Model : 8FF3FPW

Category : Cadre photo numérique

Download the instructions for your Cadre photo numérique in PDF format for free! Find your manual 8FF3FPW - PHILIPS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 8FF3FPW by PHILIPS.

USER MANUAL 8FF3FPW PHILIPS

Register your product and get support at

6.9 Minuterie (activation/désactivation

(carte SD/MMC, MMC+, Memory Stick, xD

6.9 Minuterie (activation/désactivation

CCC, CE, FCC, GOST, PSB, UL, VCCI

One Year Limited Warranty (for US and

Philips warrants that this product shall be free

from defects in material, workmanship and

assembly, under normal use, in accordance with

the specifications and warnings, for a period

of one year from the date of purchase. This

warranty extends only to the original purchaser

of the product, and is not transferable. To

exercise your rights under this warranty, you

must provide proof of purchase in the form of

an original sales receipt that shows the product

name and the date of purchase. For customer

support or to obtain warranty service, please

visit our website www.philips.com/welcome or

Contact Philips Customer Care Center at:

1-888-PHILIPS (1-888-744-5477) IN U.S.A.,

Puerto Rico, or U.S. virgin islands. 1-800-661-

6162 (French speaking), 1-888-PHILIPS (1-

888-744-5477) (English or Spanish speaking) in

Canada. THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. Philips liability is limited

to repair or, at its sole option, replacement of

the product. Incidental, special and consequential

damages are disclaimed where permitted by law.

This warranty gives you specific legal rights. You

may also have other rights that vary from state

Recycling Information for Customers

Philips establishes technically and economically

viable objectives to optimize the environmental

performance of the organization’s product,

service and activities.

From the planning, design and production

stages, Philips emphasizes the important of

making products that can easily be recycled. At

Philips, end-of-life management primarily entails

participation in national take-back initiatives

and recycling programs whenever possible,

preferably in cooperation with competitors.

There is currently a system of recycling up and

running in the European countries, such as The

Netherlands, Belgium, Norway, Sweden and

In U.S.A., Philips Consumer Electronics

North America has contributed funds for the

Electronic Industries Alliance (EIA) Electronics

Recycling Project and state recycling initiatives

for end-of-life electronics products from

household sources. In addition, the Northeast

Recycling Council (NERC) - a multi-state

non-profit organization focused on promoting

recycling market development - plans to

implement a recycling program.

In Asia Pacific, Taiwan, the products can be taken

back by Environment Protection Administration

(EPA) to follow the IT product recycling

management process, detail can be found in web

For help and service, please read the section of

Service and Warranty or the following team of

Environmental specialist can help.

Mr. Job Chiu - Environment manager

Philips Electronics Industries (Taiwan) Ltd,

Monitor Business Unit

E-mail: job.chiu@philips.com

Tel: +886 (0) 3 454 9839

Mr. Maarten ten Houten - Senior Environmental

Tel: +1 865 521 4322

Banned Substance Declaration

This product comply with RoHs and Philips BSD

(AR17-G04-5010-010) requirements

Service et garantieCE Declaration of Conformity

Philips Consumer Electronics declare under our

responsibility that the product is in conformity

with the following standards

• EN60950:2000 (Safety requirement of

Information Technology Equipment)

• EN55022:1998 (Radio Disturbance

requirement of Information Technology

• EN55024:1998 (Immunity requirement of

Information Technology Equipment)

• EN61000-3-2:2000 (Limits for Harmonic

• EN61000-3-3:1995 (Limitation of Voltage

Fluctuation and Flicker)

following provisions of directives applicable

• 73/23/EEC (Low Voltage Directive)

• 89/336/EEC (EMC Directive)

• 93/68/EEC (Amendment of EMC and Low

and is produced by a manufacturing

organization on ISO9000 level.

Federal Communications Commission

(FCC) Notice (U.S. Only)

This equipment has been tested and found

to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference in a

residential installation. This equipment generates,

uses and can radiate radio frequency energy

and, if not installed and used in accordance with

the instructions, may cause harmful interference

to radio communications. However, there is

no guarantee that interference will not occur

in a particular installation. If this equipment

does cause harmful interference to radio or

television reception, which can be determined

by turning the equipment off and on, the user is

encouraged to try to correct the interference

by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the

equipment and receiver.

• Connect the equipment into an outlet on a

circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/

DPF technician for help.

Changes or modifications not expressly

approved by the party responsible for

compliance could void the user’s authority to

operate the equipment.

Connections to this device must be made with

shielded cables with metallic RFI/EMI connector

hoods to maintain compliance with FCC Rules

To prevent damage which may result in fire or

shock hazard, do not expose this appliance to

rain or excessive moisture.

THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE-CAUSING EQUIPMENT REGULATIONS.

FCC Declaration of Conformity

Model Number: 6FF3FP, 7FF3FP, 8FF3FP Trade Name: Philips 6FF3FP, 7FF3FP,

8FF3FP Responsible Party: Philips Consumer

Electronics North America

FRANÇAISDeclaration of Conformity for Products

Marked with FCC Logo, United States

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any

interference received, including interference that

may cause undesired operation.

Commission Federale de la

Communication (FCC Declaration)

EN 55022 Compliance (Czech Republic

Service et garantiePolish Center for Testing and Certification

• The equipment should draw power from a

socket with an attached protection circuit(a

three-prong socket). All equipment that

works together (computer, monitor, printer,

and so on) should have the same power

• The phasing conductor of the room’s

electrical installation should have a reserve

short-circuit protection device in the form

of a fuse with a nominal value no larger than

• To completely switch off the equipment, the

power supply cable must be removed from

the power supply socket, which should be

located near the equipment and easily

• A protection mark “B” confirms that the

equipment is in compliance with the

protection usage requirements of standards

PN-93/T-42107 and PN-89/E-06251.

North Europe Information (Nordic

End-of-Life Disposal

• Your new product contains materials that can

be recycled and reused. Specialized companies

can recycle your product to increase the

amount of reusable materials and to minimize

the amount to be disposed of.

• Please find out about the local regulations on

how to dispose of your old monitor from

your local Philips dealer.

• (For customers in Canada and U.S.A.)

Dispose of in accordance to local-state and

federal regulations.

For additional information on recycling contact

www.eia.org (Consumer Education Initiative)

This product is labelled with this symbol in

accordance with European Directive 2002/96/

EG to indicate that it must not be disposed of

with your other household waste. Please check

your local city office or waste disposal service

for the return and recycling of this product.

Waste Electronics and Electrical

This product is labelled with this symbol in

accordance with European Directive 2002/96/

EG to indicate that it must not be disposed of

with your other household waste. Please check

your local city office or waste disposal service

for the return and recycling of this product.

End of life directives - Recycling

Your new DPF contains several materials that

can be recycled for new uses.

Votre nouveau téléviseur contient plusieurs

All rights reserved.