GPS 7 2V LIIO - Hedge trimmers Güde - Free user manual and instructions
Find the device manual for free GPS 7 2V LIIO Güde in PDF.
User questions about GPS 7 2V LIIO Güde
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Hedge trimmers in PDF format for free! Find your manual GPS 7 2V LIIO - Güde and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GPS 7 2V LIIO by Güde.
USER MANUAL GPS 7 2V LIIO Güde
natural_image
Icon of an open book inside a black circle (no text or symbols)Deutsch
English
Français
Čeština
Slovenčina
Magyar
Nederlands
Italiano
natural_image
Line drawing of a vacuum cleaner with attached tool, no text or symbols present
CE
# 95505
text_image
Labeled diagram of a handheld device with numbered parts for identification
text_image
3 4 B
natural_image
Close-up of a hand holding a mechanical component with a tool, showing a disassembly or assembly process (no text or symbols visible)
natural_image
Close-up of a car fuel plug with attached cable and plug, showing a white arrow indicating a component (no text or symbols present)
natural_image
Exterior view of a white electric motor with attached cable and control panel (no visible text or symbols)
text_image
a F
natural_image
Close-up of a robotic arm gripping a small mechanical component, with directional arrows indicating movement (no text or symbols)
text_image
a c b H
natural_image
Close-up of a handheld electric shaver with a hand adjusting its tip, showing motion arrows (no text or symbols)DE
Please read carefully these Operating Instructions before putting the appliance into operation.
A.V. 2 Any reprints, even partial, are subject to approval. Technical changes reserved. Pictures just for illustration purposes!!!
 | Do you have any technical questions? A claim? Do you need spare parts or the Operating Instructions?You will be helped quickly and without needless bureaucracy at our webpagewww.guede.comin the Services part. Please help us be able to assist you. To be able to identify your appliance when claimed, we need to know its serial No., order No. and year of production. All these details can be found on the type label. Enter the details below for future reference.Serial No.Order No.Year of production:E-Mail:support@ts.guede.com | |
Appliance
GPS 7.2V LI-ION ACCU SET OF GARDEN TOOLS
Set with telescopic extension and chassis (grass shears). Branded accumulator (Samsung); due to simple exchange, it can be used as grass shears or shrub shears. Including battery charger (3-5 hours). Twist handle (fivefold raster). Telescopic extension is great for bigger shrubs and simpler hedge structures if extension for shrub shears is used. The grass shears with a chassis for comfortable grass trimming in a vertical position, soft handle.
Use as designated
The appliance has been designed for trimming lawn edges and small grass plots for handymen and gardeners. The appliance must not be used for crushing compost material as persons and things could be put at risk. The appliance can only be used in accordance with its designation. Any other use is not in accordance with the designation. The user/operator, not the producer, is liable for any related damage and injuries of all kinds.
Scope of supply and appliance description (pic. A)
- Grass knife
- Wheels
- Switching bar
- Switch-on button
- Telescopic guide rod
- Telescopic screw coupling
- Guide handle
- Appliance fixture
- Knife cover
- Charger
- Shrub knife
GB
EU Declaration of Conformity
We,
Güde GmbH & Co. KG
Birkichstraße 6
74549 Wolpertshausen - Germany,
herewith declare that the following appliance complies with the appropriate basic safety and health requirements of the EU Directives based on its design and type, as brought into circulation by us.
In case of alternation of the machine, not agreed upon by us, this declaration will lose its validity.
Machine description: GPS 7.2V LI-IO
Article No. 95505
Date/authorised signature: 25 Nov, 2008
Title of signatory: Mr Arnold, Managing Director
Technical documentation: J. Bürkle FBL; QS
Applicable EU Directives:
2006/42 EG
2006/95 EC
2004/108 EG
2000/14 EG
2002/95/EC (RoHS)
REACH EG-VO No. 1907/2006
Applicable harmonised standards:
EN 60335-1:2002+A1+A11+A12+A2
EN 60335-1/A2:2006
EN 60335-2-94:2006
EN 50366/A1:2006
EN 55014-1:2006
EN 55014-2/A1:2001
EN 61000-4-2:2001
EN 60745-2-15:2006
EN 60745-1:2006
EN 14875:2004
ZEK 01.1-08
Ref. No. 48.403.08.0278.00
Place of certification:
80339 Munich, Germany
Guarantee
The guarantee solely covers inadequacies caused by material defect or manufacturing defect.
Original payment voucher with the sales date needs to be submitted for any claim in the guarantee period.
The guarantee does not cover any unauthorised use such as appliance overloading, use of violence, damage as a result of any unauthorised interference or caused by foreign items. Failing to follow the operating and assembly instructions and common wear are also not included in the guarantee.
General safety instructions
Check the appliance before using it. The appliance must not be used if any safety equipment and/or knives are damaged or worn-out. It is always necessary to follow the safety instructions.
Use the appliance exclusively for purposes specified in the Operating Instructions. Safety in the workplace is your responsibility.
Before you start working, check the area you are going to trim. Remove any foreign items you find. Look out for foreign items even when working. If you encounter any obstacle when trimming, switch the appliance off (by releasing the switch) and remove the obstacle.
If the knives are blocked, switch the appliance off and remove the failure (thick branch, foreign item) by a blunt object. Never use your fingers – knives under voltage can
seriously injure you. You should rather take out the accumulator first and then remove the failure.
Knives keep rotating for some time after the appliance is switched off!
Check the electric cable regularly for any damage and wear (weak cable). The cable can only be used when in a perfect condition.
Work only when there is good visibility.
Make always sure you take stable stand when working. Be careful when reversing – risk of trip! If you interrupt your work and would like to continue in any other place, you must switch the appliance off and switch it on only after reaching the new place of work.
Never use the appliance when raining and in a damp environment.
Protect the charger and cable against damage and sharp edges. Cables that are damaged must be immediately replaced by an electrician.
Never work with the appliance when raining. Do not leave the appliance outdoors. The appliance must not be used in a damp environment. Wearing safety gloves is recommended for work with the appliance.
Wear appropriate working clothes such as gloves and non-slip shoes. Do not wear loose clothes. Long hair should be protected by a hairnet.
Avoid abnormal body posture and ensure stability.
Ensure a safe distance between the appliance and your body when the appliance is switched on.
Make sure there are no other persons and animals in your place of work (turning radius). There must be no cables in the trimming area.
Use the appliance only if in a proper operating condition.
Check the knives regularly for any damage and have the appliance professionally repaired by the customer service or a qualified shop if necessary.
Keep the appliance in a dry place, out of reach of children. If the appliance is not used, you must provide it with a protection cover included in the supply to prevent any unintentional contact with the knives.
The appliance must not be overloaded. Do not use the appliance for works not designed for.
The appliance must be regularly checked and maintained. Knives that are damaged always need to be exchanged in pairs. If the appliance is damaged by an impact (falls on hard surface, etc.), it must be immediately checked by a professional.
Treat the appliance carefully. Keep it clean and sharp to ensure efficient and safe trimming. Observe the maintenance and cleaning rules.
The appliance has not been designed to be used by persons (including children) with physical or sensory disability or mental disorder. Persons with work of experience in or knowledge of the appliance also prohibited to work with the appliance.
Charge the accumulator only in chargers recommended by the producer.
There is a risk of fire at a charger suitable for a certain type of accumulators if used with other accumulators.
Use only the specified accumulators for your electric appliance.
Use of other accumulators can lead to injuries and represent a risk of fire.
An accumulator not used needs to be stored out of reach of paperclips, coins, keys, nails, screws and other small metal items that could cause short-circuiting. Short circuit between the accumulator contacts can lead to burn injuries or fire.
Liquid may run out of the accumulator in case of improper use. Prevent contact with the liquid. Rinse with water at any accidental contact. Seek medical advice if your eyes have been involved.
Liquid run out of the accumulator may irritate your skin.
Electric safety:
CAUTION! Risk of electric shock!
There is a risk of electric shock!
Pull the plug out of socket when removing any failure and before maintenance work.
To be used only with connections with safety switch against stray current (RCD)!
Please ask your electrician.
Details on the type label must correspond to electrical network details.
Protect the cable against excess temperatures, oil and sharp edges.
General instructions:
Always carry out visual inspection before using the appliance to find out if especially the electric cable and plug are not damaged.
An appliance that is damaged must not be used.
Have a damaged appliance checked in the GÜDE service department or at an authorised electrician.
Behaviour in case of emergency
Provide necessary first aid treatment corresponding to the injury nature and seek qualified medical help as soon as possible.
Protect the injured person from other injuries and calm him/her down.
First aid kit must always be available in the place of your work in case of accident in accordance with DIN 13164. Material taken out of the first aid kit needs to be supplemented right away.
If help is needed, please provide the following details:
- Place of accident
- Accident nature
- Number of injured persons
- Injury type
Marking:
Product safety:
| CE | |
| Product corresponds to appropriate EU standards |
Prohibitions:
 |  |
| General prohibition(in connection with any other icon) | Do not touch the rotating parts |
Warning:
 |  | ||||
| Warning/caution | Warning against hazardous voltage | ||||
Commands:
 |  |
| Use protective glasses Use earphones | |
| Read the Operating Instructions before using the appliance | Use a helmet |
| Use protective gloves | |
Environment protection:
 |  | ||
| Dispose waste professionally so as not to harm the environment. | Packing cardboard material may be delivered to collecting centres for recycling. | ||
 | |||
| Any defective and/or disposed electric or electronic appliances must be delivered to appropriate collecting centres. | |||
Package:
 |  |
| Protect against moisture This side up | |
Residual risks and protective measures
Electric residual risks
| Threat Description Protective measure(s) | ||
| Direct electrical contact | Electric shock Safety switch against FI stray current | |
| Indirect electrical contact | Electric shock through a medium | Safety switch against FI stray current |
Disposal
The disposal instructions are based on icons placed on the appliance or its package. The description of the meanings can be found in the "Marking" chapter.
Do not put the electric appliance to household waste! Electric appliances must be collected separately and recycled in an environment friendly manner according to the European Directive 2002/96/EG on used electric and electronic appliances and its application in the national law.
Operating staff requirements
The operator must carefully read and understand the Operating Instructions before using the appliance.
Qualification: No special qualification is necessary for using the appliance apart from detailed instruction by an expert.
Minimum age: The appliance can only be operated by persons over 16 years of age. An exception includes youngsters operating the appliance within their professional education to achieve necessary skills under trainer's supervision.
Training
Using the appliance requires only corresponding instruction by a professional or reading the Operating Instructions. No special training necessary.
Technical specification
| Accumulator: 7.2 V / | 1,300 m Ah ( Li-lon ) |
| Charger: 3-5 hours | |
| Grass shears trimming width: | 100 mm |
| Hedge shears trimming length: | 190 mm / max. diameter 8 mm |
| Pull-out telescopic rod app. 700-1,150 mm | |
| Operating time with fully charged battery: | app. 50 min. |
| Noise levelWA | 87 dB |
| Weight: 1.9 kg | |
Transport and storing
⚠️ Store the appliance in a dry condition, with no rust, out of reach of children. Clean the appliance with a damp cloth. Never touch the pole terminals of the accumulator!
Assembly and first start-up
Caution: The accumulator is supplied partially charged. To ensure full power of the accumulator, charge it to the full extent before first start-up.
The Li-Ion accumulator can be charged anytime without its service life being reduced as a result. Charging interruption does not damage the accumulator.
The Li-Ion accumulator has electronic protection against deep discharge.
Due to the safety switch, the electric appliance switches off when the accumulator is discharged:
The inserted tool is no longer moving.
After the electric appliance is switched off, do not press the on/off button anymore.
If you do not use the accumulator, we recommend charging it to the full extent at least once in 6 months.
The appliance must not be stored or used at temperatures exceeding 40 °C as it reduces the accumulator life.
Make sure the knife cover is fitted, which prevents cutting injuries!
- Compare the voltage of your network with that of the charger. If corresponding, plug the charger.
- Plug the charging cable into appropriate outlet on the back of the grass shears handle (F).
- Charge the accumulator to the full extent (indicator turns off when the accumulator is fully charged (Fa))
- Remove the knife cover
• To start the grass shears, you must first press the switching bar and then the switch-on button.
• The grass shears can now be operated.
Operation with the telescopic guide rod
- Fit the appliance fixture to the guide rod end until it snaps in audibly (B)
- Put the wheels into each other (C)
-
Push the grass shears in the appliance holder until they snap in (D)
-
Adjust your operating height by shifting the telescopic guide rod. Release the telescopic screw coupling, adjust the operating height and tighten the screw coupling again.
- Plug the control cable of the guide rod into appropriate outlet on the back of the handle (E)
- To start the grass shears, you must first press the switching bar and then the switch-on button on the guide rod.
- The grass shears in the guide rod can now be operated.
Knife change
Make sure the knife cover is fitted, which prevents cutting injuries!
When changing the grass knife for a shrub knife you must remove the bottom cover (G) of the grass knife. To that end, the deflected cover with an arrow (pic. G) needs to be lifted and pulled out 6-8 mm in the operating handle direction. The cover can now be taken out. Replace the grass knife with the shrub knife. The eccentric of the drive wheel (H a) must bite exactly into the fixture (H b).
Moreover, it may be necessary to slightly adjust (shift) the knife fixture so that the knife matches the drive wheel. The knife hole must exactly match both centring pins (H c). The knife head can be fixed in several positions by pressing the locking button (I).
Maintenance and cleaning
Install the knife cover before all works on the electric appliance (e.g. maintenance, tool change, etc.) and during its transport and storing!
There is a risk of injury associated with unintentional pressing the on/off button.
Keep the electric appliance and any ventilation slot clean to ensure good and safe operation.
If the accumulator does not work anymore, please contact our customer service department.
Rep.Ref. 48.403.08.0278.00
74549 Wolpertshausen - Germany,
Rep.Ref. 48.403.08.0278.00
Certifikační místo:
74549 Wolpertshausen - Germany,
Rep.Ref. 48.403.08.0278.00
Rep.Ref. 48.403.08.0278.00
74549 Wolpertshausen - Germany,
Rep.Ref. 48.403.08.0278.00
Rep.Ref. 48.403.08.0278.00
