L5 - Printer HPRT - Free user manual and instructions

USER MANUAL L5 HPRT

Note: The packing items are actually based on the order.

Using Guide

Power Button Status

Hold down for 2 seconds to ON/OFF

• Lighting: Standby / Charging completed
• Slow flash: Charging / Firmware updating
• Fast flash: Supplies near end, cover open, low battery, the print head is overheated

Charging

Use it for the first time after purchase

• Recommended to use after full charge
• Charge via AC adapter or computer USB port

USB Cable

In addition to the supplied USB cable, you can also use the charging cable of mobile device

• Recommended to use the supplied USB charging cable to charge
  It takes about 90 minutes to charge with 5V/1A

Appearance and Components

① USB Interface
② Upper Cover
③ Power Button

Replace Supplies

Figure 1

Figure 2

Figure 3

• Place printer as shown in figure 1, pay attention to the arrow marked on the printer.
• With reference to figure 2, push down the upper cover.
• When replacing supplies, place the supplies in reference to the direction shown in figure 3.
• If the supplies are properly placed, close the upper cover to the lower cover and push the upper cover back to its original shape.

When changing supplies, do not touch the print head in case of injury caused by overheating.

APP Setting

Simple Operation APP Setting

• You can view information such as remaining power, firmware version in device management.

Connection

Scan the QR code below and install the App.

Open the App, click "Connect Printer" and select the corresponding printer to connect from the list found via Bluetooth.

Safety Precautions

Battery Overheating

Battery Management and Precautions

• When charging is completed, please unplug the USB cable.
• To avoid fire, do not charge at high temperature (e.g. sweating rooms, bonfire nearby, etc.).

Burn Hazard

Print Head Overheating

• After printing, do not touch the print head directly in case of injury caused by overheating.

Charger Attention

Print Head Management and Precautions

• There may be damage to the print head due to improper charging.
  We recommend not to use printer in high humidity or dusty areas.

Charging Port Damage

Charging Precautions

• Please gently insert or unplug the USB cable to prevent excessive damage to the charging port.

付属品

HPRT L5/L5S

取付

印刷用紙

USBケーハル

• 1
  Wannanwunwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwnwn

Wn

• mnnnnaaennnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

yannnnnnae nnnnne

WwWwWwWwWwWwWwWwWwWwWwWwWwWwWwWwWwWwWwWwWwWwWwWwWwWwWwWwWwWwWwWwWwWwWwWwWwWwWwWwWwWwWwWwWwWwWwWwWwWwW
- 157uuninWJXnTtUwunwnnnnwnnnnn

y

·WJUHUNNANNNANNN

Listedecolisage

HPRT L5/L5S