VKP1-RJO - Système de sécurité myQ - Free user manual and instructions

USER MANUAL VKP1-RJO myQ

Overview What's in the Box (VKP1-MYQ | VKP1-LM | VKP1-RJO)

Wall Anchors (Qty. 2)

5/16" Security Screw (Qty. 1)

Charging Cable (Qty. 1)

Video Keypad with Battery (Qty. 1)

Video Keypad Accessories:

VKP1-MYQ-BT1 VKP1-MYQ-SMW VKP1-MYQ-20DEG VKP1-MYQ-0DEG =

Battery and Swivel Mounting 20° Mounting 0° Mounting Charging Cord Kit Bracket and Bracket and Bracket and Hardware Kit Hardware Kit Hardware Kit

For use with residential garage door openers manufactured after January 1, 1993. Make sure your garage door opener has a working light bulb because it is a programming indicator.

Set Up Your Video Keypad

Detach the back cover from your Video Keypad, remove the battery, and peel back the protective film.

Plug the battery into a USB power source using the cable provided. Please fully charge the battery before setting up your Video Keypad, which can take up to 10 hours. Once the LED light on the battery changes from red to green, it's ready to use.

Re-insert the battery and attach the back cover. The cover will click into place once secure. Your device will begin to power on and the Video Keypad LED will be solid white before flashing blue.

Set Up Your Video Keypad

Download the myQ App

The myQ mobile app will guide you through programming your Video Keypad.

With your smart phone, download myQ by either:

+ _ Scanning the second OR code on the packaging insert + Searching for “myQ” in your phone's app store

°__Visiting myQ.com/app on your phone’s browser

Have your Wi-Fi password available before proceeding.

To program your Video Keypad, stay near your installed garage door opener. Do not mount the keypad until a later step.

In the myQ app, select the "+" icon from the home screen and select Device.

When prompted, select Video Solution, followed by Video Keypad, and follow the in-app instructions.

After setup, enter the PIN you've created and press the home button to ensure the keypad is connected to your opener and able to opera door.

Set Up Your Video Keypad

Install Mounting Bracket

Select a location to mount your Video Keypad at a minimum height of 5 feet (1.5 m) out of reach of children. Begin by using the included mounting bracket as a template to mark the position of the bracket's mounting holes. Please note, the location of the holes may differ from your existing keypad (if applicable).

If installing your Video Keypad on stucco, brick, or concrete:

Drill holes in your wall with a 1/4” masonry bit, then insert the included wall anchors by pushing them into place or lightly tapping with a hammer. If

installing on wood or vinyl siding the wall anchors are not needed, and you can skip this step.

Set Up Your Video Keypad Install Mounting Bracket

Position the mounting bracket so that the Video Keypad is at your preferred orientation. The included 20-degree mounting bracket can be flipped

to adjust the angle depending on your surroundings. We recommend positioning the keypad to be angled toward your driveway.

Using the two Mounting Screws and a Philips head screwdriver, secure the bracket by driving the screws into the wall (or anchors, if installed) through the mounting holes until flush with the bracket.

Secure to Mounting Bracket

If using the 20° or 0° mounting bracket, slide the top of the Video Keypad into the ridges at the top of the bracket, then push the bottom ofthe keypad into the bracket.

If using the swivel mount, push the Video Keypad directly into the mount to snap it into place with the ridges on the sides of the bracket.

Set Up Your Video Keypad

Secure to Mounting Bracket

Once your Video Keypad is attached to the mounting bracket, drive the included short security screw into the bottom of your device using a Philips head screwdriver to secure it into place.

L DO NOT USE any screw other than the included short security screw to secure your Video Keypad. Using the wrong screw could damage the device.

Your Video Keypad Is Ready To Use

+ Use the home button to close your garage door when open.

° Usethe call button to contact the myQ account owner.

°__Assign up to 16 unique PIN codes for family, friends and guests to open the garage door.

+ __Live stream HD video 24/7 with night vision and two-way audio.

What Is a myQ Video Storage Plan?

When you want to see what is happening in and around your garage, myQ Video Storage allows you to record and view videos for up to 30-days. Whether you're securing your garage, checking on the people who matter most or capturing a fleeting moment - a Video Storage plan lets you see the whole picture. Enhanced features such as People Detection and Rich Notifications enable more meaningful and actionable insights.

Starting at only $3 USD per month, you can easily subscribe to a myQ Video Storage Plan in the account settings of your app. Your new device automatically comes with a free 30-day trial. for additional information.

Additional Resources

For additional information or assistance, please visit:

One Year Limited Warranty

The Chamberlain Group LLC warrants to the first consumer purchaser of this product that it is free from defect in materials and/or worksmanship for a period of 1 year from the date of purchase.

Please refer to the label on the battery to properly recycle and dispose of the battery.

© 2023 myQ All Rights Reserved. Your opening and use constitutes acceptance of, and is subject to, License Agreement and Terms of Use available at myQ.com/agreement.

To prevent possible SERIOUS INJURY or DEATH from a moving gate or garage door:

° Install Keyless Entry Control within sight of garage door, out of reach of small children at a minimum height of 5 feet (1.5 m) above floors, landings, steps or any other adjacent walking surface, and away from ALL moving parts of door.

° ALWAYS keep remote controls out of reach of children. NEVER permit children to operate or play with remote controls.

+ Activate gate or door ONLY when it can be seen clearly, is properly adjusted, and there are no obstructions to door travel.

e ALWAYS keep gate or garage door in sight until completely closed. NEVER permit anyone to cross path of moving gate or door.

WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

NOTICE: This device complies with Part 15 ofthe FCC rules and Industry Canada's license- exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device must be installed to ensure a minimum 20 cm (8 in.) distance is maintained between users/bystanders and device.

This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 ofthe FCC rules and Industry Canada ICES standard. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more ofthe following measures

Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help

Chamberlain, the Chamberlain logo, LiftMaster, myQ and the myQ logo are registered trademarks of The Chamberlain Group LLC. Patented and patents pending. See ChamberlainGroup.com/patents. Wi-Fi is a trademark of Wi-Fi Alliance”. Overhead Door and Wayne Dalton are trademarks of Overhead Door

Corporation. Genie is a trademark of GMI Holdings, Inc. Stanley is a trademark of Stanley Logistics LLC. Sommer is a trademark of Sommer Antriebs-und Funktechnik GmbH. Guardian is a trademark of ADH Guardian USA LLC. Xtreme Garage and Performax are trademarks of Menard, Inc. All other

trademarks are the property of their respective owners.

©2023 The Chamberlain Group LLC All Rights Reserved 114-5890-000 9

CLAVIER VIDÉO SMART GARAGE