58381 - Above-ground pool BESTWAY - Free user manual and instructions

USER MANUAL 58381 BESTWAY

WE SUGGEST NOT TO RETURN

THE PRODUCT TO THE STORE

QUESTIONS? PROBLEMS?

bestwaycorp.com/support Visit Bestway YouTube channel You({i

Visit Bestway YouTube channel £ You) “THE PRODUCT TO THE STORE QUESTIONS? PROBLEMS? MISSING PARTS? deu WARNING

IMPORTANT SAFETY INSTRUCTIONS

WARNING - RISK OF ELECTRIC SHOCK - The pump is to be supplied by an isolating transformer or supplied through a residual current device (RCD) having a rated residual operating current not exceeding 30 mA. The plug of pump shall be at least 3.50m away from the pool. The appliance must be supplied by earthed power source. Extension cords can't be used. WARNING - RISK OF ELECTRIC SHOCK - The pump cannot be using while people are inside the pool. Forbid the access of the pool in case of damage of the filter pump. DO NOT BURY CORD. Locate cord to minimize abuse from lawn mowers, hedge trimmers, and other equipment. WARNING - The supply cord cannot be replaced. If the cord is damaged the appliance should be scrapped. CAUTION - This pump is for use with storable pools only. Do not use with permanently-installed pools. À storable pool is constructed so that it is capable of being readily disassembled for storage and reassembled to its original integrity. A permanently-installed pool is constructed in or on the ground or in a building such that it cannot be readily disassembled for storage. IMPORTANT - Using the pump with an unmatched electrical supply is dangerous and will result in catastrophic failure of pump. RISK OF ELECTRICAL SHOCK - When working with electricity, turn the electrical power off at the circuit breaker and lock breaker door. Failure to do so will result in increased risk of shock, injury and possibly death. DO NOT REMOVE THE GROUNDING PRONG OR MODIFY THE PLUG IN ANY WAY. DO NOT USE ADAPTOR PLUGS. Consult a qualified electrician for any questions related to the validity of your plugs grounding. Handle the pump with care. Do not pull or carry the pump by the power cord. Never pull a plug from the outlet by yanking the power cord. Keep cord free

from abrasions. Sharp objects, oil, moving parts, and heat should never be exposed to the filter pump. WARNING - This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. (For EU market) WARNING - This appliance is not intended for use by persons (including children) With reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. (For market other than EU) Cleaning and user maintenance must be performed by an adult above 18 years old who is familiar with the risk of electric shock. When the appliance will be not used for a long time, such as in the winter, the pool set should be disassembled and stored indoor. CAUTION - Read the instruction before using the appliance and installation/reassembly every time. The appliance must be placed more than 2m away from the pool. (For France only). Electric installations should follow national wiring rules. Consult a qualified electrician for any questions. Only the media provided or specified by the manufacturer is to be used with product installation. Itis essential to check that the suction openings are not obstructed. Itis advisable to stop the filtration during maintenance operations on the filtration system. Reguliy monitor the filter clogging level. Aweekly check is recommended for cleaning. Minimum daily filtration operating time of 8 hours is recommended to ensure clear pool water. Itis essential to change any damaged element or set of elements as soon as possible. Use only parts approved by person responsible for placing the product on the market. All filters and filter media shall be inspected regularly to ensure that there is not a build-up of detritus thus preventing good filtration. The disposal of any used filter media should also be in accordance with applicable regulations/legislation. In case of doubt on the pump or any circulation devices, contact a qualified

installer, or the manufacturer/importer/distributor. The water circulation installation shall comply with the European as well as national/local regulations, especially when dealing with electrical issues. Any change of valve position, pump size, grille size can cause a change of the flow and the suction velocity can be increased. Mind all the safety requirements and recommendations described in the manual. NOTE: Please examine equipment before use. Notify Bestway at the customer service address listed on this manual for any manufacturing defect or missing parts at the time of purchase. Verify that the equipment components represent the filter pump model that you had intended to purchase. NOTE: Place pump on a solid and level ground. Pay attention to position of pool and pump so adequate ventilation, drainage, and access for cleaning is available. Never place pump in an area that may accumulate water, or in an area where foot traffic will flow around the pool. Itis necessary to have the plug accessible after installation of the pool. NOTE: Atmospheric conditions may affect the performance and life span of your filter pump. Unnecessary wear and tear may occur during periods of cold, heat and exposure to sun. Whenever possible shelter pump from these conditions. Itis important to ensure the factory equipped stopper plugs for the inlet and outlet ports replace the screens before removal or maintenance on the pump is attempted. NOTE: Do not add chemicals in the filter pump. Don't plug or unplug the appliance if hand is wet. Always unplug the appliance: + On raining days + Before cleaning or other maintenance + Leave it unattended on holidays Safekeeping the instruction. For reconstruction the pool set every time, please always refer to the instructions. - Ifinstruction is missed, please contact with Bestway or search it in website: www.bestwaycorp.com NOTE: This product is not intended for commercial use. Please read the instruction manual carefully and keep it for future reference. SAVE THESE INSTRUCTIONS.

PEDESTAL FIXING ENG0335-2-41 TEST standard requires the fiter pump Lo be verialy fied on ground or a cartain pedestal made of wood or concrets belare use. There shoulé be io holes Om in diameter on te pedestl, the space between which should be 127. Put filer pump on the pedestal and fx them together by fasten the bolts and nuts. Al ie pedestl parts should weigh over 8kgs at least to prevent he pump from accidental aling

NOTE: lt is imperative to check that the hydraulic connectors are not obturated. PUMP DISPOSAL OPERATION

1. Openlunscrew he Air Purge Valve on he top ofthe Fiter Pump; iris released as water fils

2. When water comes ou of the Ar Purge Valve screwr closed and wipe away any water.

2. To sta he Fier Pump, insert he plug nt a residual current device (RCD)

Make sure both the pool's Inlet and Outlet valves are fully covered by water before operating the Filter Pump. CAUTION: YOU MUST ENSURE THE FILTER PUMP IS

UNPLUGGED BEFORE ANY MAINTENANCE BEGINS OR

2. Loosen he Hose Clamps on the pool Int and Outet Hoses by unscreing in {y nut counter-clockwise.

3. Remove Debris Screens from inside of pool.

4. Replace 1ne Debris Screens with ing Stopper Plugs in the pool Inet and Outt Vaves.

S$. Unscrew the Fier Cap Rainer and remove the Fitor Cap. 6. Clean the Fiter Cartridge with a garden hose, fer cartridge remains salled or iscolared, is necessary to replace with a new one .Insor the cleaned (or new) Fiter Cartridge; ensure is centerad in the Fier Pump.

8. Check hat the Fier Cap Seal is in place.

8. Replace the Fitor Cap and screw the Fiter Cap Retainer io position.

10. Replace te Stopper Pluge wi ie Debris Screens in the poa/ Ilt and Out Vaives. Tighn the Hase Glamps. Water wi now law 1o the pump. 1.Follo the PUMP INSTALLATION DIRECTIONS secion 0 prapar Ina system for use. IMPORTANT: For sanitary reasons we suggest replacing the Filter Cartridge with a new one every two weeks. PUMP STORAGE %. Unplug the Fiter Pump To ensure pool water stays

2. Folon he instucions as previous ouined 1 tap water fouing tie Fier |_ clean, please clean the filter

Pump and 0 remove the Fier Gariég.

3. Discard he Fier Carridge. cartridge every day and

4. Detach al Hoses. change when required.

5. Dry all components tharough.

6. Store he filter pump in à dry indoor ocation out of the reach of chiren. Storage temperature: 4-40°C (392-104 F)

PUMP WARRANTY For information concerning pump warranty please visit our website at: www:bestwaycorp.com

COSRNEPOUNT RER LOGEMENT CDS

HAUATIOM TEXOBCNYXKMUBAHUS, UHAUE WUMEETCA PUCK