DV-1500 - Steamer VALBERG - Free user manual and instructions

USER MANUAL DV-1500 VALBERG

Thank you for choosing this VALBERG product.

VALBERG products are chosen, tested, and recommended by ELECTRO DEPOT, so you can be sure you are getting a top-quality, easy-to-use product that won't let you down.

We're confident your new device will be a pleasure to use every day!

Welcome to ELECTRO DEPOT.

Table of Contents

Product overview

Parts

Specifications

Product usage

Using your garment steamer

Cleaning and maintenance

Cleaning and maintenance

Troubleshooting

Storage

Parts

A Stainless steel panel
B Steam button
C Retaining ring
D Fixed seat of water tank
E Protegulum
F Upper cover
G Panel
H LED lamp 2

I Retaining ring
J Power button
K LED lamp 1
L Handle
M Cord guard
N Net cloth brush
0 Hairbrush
P Measuring cup

Specifications

Rated supply:	220-240V
Electric protection class:	Class I
Maximum power:	1500 W (230V~)
Power cord length:	200 cm
Product weight:	0.78 kg
Water tank capacity:	125 mL
Continuous steam rate:	20 g/ min

Using your garment steamer

Before first use

• Remove any sticker or protective cover from the steam head.
  • Unwind and straighten the cord before use.
• When operating the garment steamer for the first time, allow it to steam for a few minutes. this will remove any impurities and odours that might have been left by the manufacturing process.
• When operating the garment steamer for the first time, you may want to try the steamer on an old piece of fabric before steamer on an old piece of fabric before steaming your garment.

WARNING: to avoid an electrical circuit overload, it is recommended that no other appliances are plugged into the same circuit as your garment steamer when it is in use.

NOTE: when unpacking the garment steamer, check to see you have received all the items listed in the parts list, before discarding the packaging.

Assembling/operating your garment steamer

1. Press the bottom of the water tank, take out the water tank, open the water tank cover, and inject water into the water tank. Make sure that the water in the tank is at least one third of the water and does not exceed the maximum water level. Then put it back in the tank.

NOTE: this garment steamer does not have a descaling capability. Only use clean distilled water with this product to prevent the buildup of scale.

1. Hold the appliance with your hand positioned safely at the neck of the garment steamer. in an upright position, use your other hand to attach the fabric brush onto the steam head. the fabric brush can be attached either way and will lock into position with an audible “click”.
2. Connect the device to the power socket and power on. Press the power button, the two LED lamps on the panel flash and the hot press starts to heat. When the indicator green lights stop flashing and become long-bright, the preheating is completed and you can start using it. When the power button is pressed again, only the LED lamp 1 lights up, which is the low-grade steam. Press the power button again and the LED lamp 2 also lights up, which is the high-grade steam. Press the power button for 3 seconds and the product will shut down.
3. This garment steamer has an intelligent automatic power off function. When the user stops operating this product over a certain time, the product of internal control circuit will be cut off power supply, prevent the happening of the accident, and can save electricity. You can press the power button to use the steamer again.

How to steam your garment

The garment steamer is easy to use and is perfect for removing wrinkles/creases from garments and curtains as well as refreshing furnishing fabrics.

It can be used on most fabrics as long as the fabric is hanging or where the garment steamer can be easily used in an upright position moving over the fabric in an up and down motion.

NOTE: the garment steamer is designed to be used in an upright position on hanging garments. refrain from using the steamer in or on garments in a horizontal position.

1. Check that there is ventilation behind the fabric otherwise moisture may build up causing mildew.
2. Check garment pockets are empty and turn-ups such as cuffs and hems are down.
3. Hang the garment from a hanger and stretch the fabric slightly with one hand checking that there is nothing behind the fabric that can be damaged by the steam.

NOTE: we recommend you do not steam over metal accessories. use caution and steam around the metal accessories.

1. Press and hold down the steam button. you will feel vibrations and hear a subtle humming sound while steaming; this is normal, steam facing away from you and in an upright position.
2. Gently press the fabric brush against the garment, moving your arm in an up and down motion targeting creases in the fabric.
3. Release the steam button to stop the steam.

NOTE: ensure that the fabric to be steamed is being stretched whilst steaming for best results.

WARNING: the garment steamer generates high temperatures of steam. do not touch the steam head, make sure the steamer is facing away from you in an upright position.

1. If using the garment steamer without the fabric brush, keep a distance of at least 5cm between the steam head and the garment.

To steam curtains

1. Wash and dry curtains as directed, according to the fabric type.
2. Hang the curtains and steam when they are hanging in place.
3. Lightly stretch the curtain with one hand while steaming to help remove creases more easily.

B

Product usage

To steam upholstery

1. The garment steamer can be used to help freshen up upholstery, slip covers on furniture and cushions from the furniture and in the room. before steaming, always test on a small area of the fabric that is not visible.
2. Keeping the garment steamer in an upright position and using and up and down motion. lightly steam over the fabric of your furniture. cushions should be removed and held upright for steaming. allow cushions to dry thoroughly before replacing on furniture.

NOTE: it is recommended that you use the fabric brush attachment when steaming delicate fabrics such as silk, this will protect the garment whilst steaming. for better result when removing stubborn creases, remove the fabric brush attachment from the steam head and continuously steam over the selected area until creases are removed.

WARNING:

• If garment has metal accessories, be cautious and do not have garment steamer directly over the metal as this may discolour the metal.
• Always unplug the garment steamer before attaching or detaching the fabric brush.

NOTE:

• Only use attachments or accessories provided.
- If the unit becomes noisy with a loud humming sound and no steam is being generated, check the water level in the water tank. this may indicate that the garment steamer is out of water and needs to be refilled.

WARNING: do not use the garment steamer directly on the body, animals, or while wearing the garments.

After each use

• Press the power button for 3 seconds to switch off the steamer. Switch the power off at the power outlet and disconnect the power cord from the power outlet.
• Open the water tank inlet and (over a sink or bucket) invert the water tank to empty the remaining water from the tank.
• Stand the garment steamer on its base, in an upright position, and allow to cool.

Cleaning and maintenance

• Remove the fabric brush from its steam head and clean using a damp cloth.
• Do not use harsh or abrasive cleaning agents or solvents.
• Do not put the garment steamer in water or any other liquid.
• Do not drop, throw or try and bend the steamer.
• Do not attempt to disassemble the appliance.
• The garment steamer is designed for household use only and to be used with normal tap water. do not put perfume, vinegar, or other chemicals in the tank. the appliance is not designed to work with these chemicals.
• Always empty the water tank after each use and rinse with clean water.
• Wipe outer surfaces with a damp cloth.
• Avoid operating the appliance in humid or moist places.
• Do not locate the appliance near a heat source or direct sunlight.
• Always ensure the steam outlet hole is clean and free from scaling and not blocked.

NOTE: this garment steamer is designed to use normal tap water.

Troubleshooting

Problem	Possible solution
The steamer does not heat up	Check main plug is inserted correctly.Check power supply.Check power button.
The steamer does not produce steam	Check the water level and the water tank inlet cover is properly covered.Press the steam activation button harder.Hold the steamer in an upright position.
Water spills from the water tank	Make sure water is not over the MAXIMUM level.Make sure water tank inlet cover is properly closed.Always use the steamer in an upright position as per the operating instructions.
The steamer is producing a loud humming or pumping sound	Check water level; if there is no water or it is low, refill the water tank.
The steamer does not seem to be removing creases easily	Hold the steamer in an upright position and stretch the fabric downward to ensure best results.
Unsure when to use the fabric brush	Use when steaming is to directly touch the fabric.When steaming delicate fabric, such as silk to reduce the risk of water dripping onto the garment while steaming.
Avoiding discolouring of metal accessories on the garment	Do not directly hover the garment steamer over the metal accessories.Use caution and steam around the metal accessories.

Storage

• Once the garment steamer has been disconnected from the power outlet, allowed to cool, emptied of water in the water tank and cleaned, it is recommended to warp the cord safely around the steamer to store in an upright position.
• We recommend you store the garment steamer on a flat surface, such as in a cupboard, until it is time to use it next.
• Store the unit in a fresh, dry and dust-free place, out of the reach of children and pets.
• Please retain the packaging and use it to store your unit when it is not in use for an extended period of time.

Merci !

This product is guaranteed against faults caused by defects in manufacturing or the materials used for a period of two years, starting from the date of purchase.* This warranty does not cover defects or damage caused by failure to install the device correctly, incorrect use of the product, or excessive wear and tear.

*proof of purchase required.

FR

CONDITION DE GARANTIE