HW-N300 - Barre de son SAMSUNG - Free user manual and instructions

USER MANUAL HW-N300 SAMSUNG

Imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please re.

your product at www samsung.com/registei

SAFETY INFORMATION SAFETY WARNINGS WARNING

+ Toreducethe risk of fire or electric shock, do TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

not expose this appliance to rain or moisture. NOT REMOVE THE COVER (OR BACK)

NO USER-SERVICEABLE PARTS ARE INSIDE. CAUTION REFER SERVICING TO QUALIFIED SERVICE + TO PREVENT ELECTRIC SHOCK, MATCH WIDE PERSONNEL. BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

CAUTION This apparatus shall always be connected to à AN AC outlet with a protective grounding DO NOT OPEN. connection

To disconnect the apparatus from the mains,

This symbol indicates that high voltage

the plug must be pulled out from the mains is present inside. Itis dangerous to Ket therefore th lug shall à make any kind of contact with any socket, therefore the mains plug shall be

internal part of this product. readily operable. + Do notexpose this apparatus to dripping or This symbol indicates that this product P PP pping AN has cluded important literature splashing. Do not put objects flled with concerning aperation and maintenance. liquids, such as vases on the apparatus.

To turn this apparatus off completely, you Class Il product : This symbol indicates

[E] that it does not require a safety connection to electrical earth (ground)

must pull the power plug out of the wall socket. Consequently, the power plug must

be easily and readily accessible at all times AC voltage : This symbol indicates that

TC | therated voltage marked with the symbol is AC voltage.

DC voltage : This symbol indicates that

the rated voltage marked with the symbol is DC voltage

Caution, Consult instructions for use This symbol instructs the user to

consult the user manual for further

safety related information

1. Ensure thatthe AC power supply in your house complies with the power requirements listed on the identification sticker located on the bottom of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (7-10 cm). Make sure the ventilation slots are not covered. Do not place the unit on amplifiers or other equipment which may become hot This unit is designed for continuous use. To fully turn offthe unit, disconnectthe AC plug from the wall outlet. Unplug the unit if you intend to leave it unused for a long period of time.

2. During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could damage the unit

3. Do not expose the unit to direct sunlight or other heat sources, This could lead to overheating and cause the unit to malfunction

4. Protect the product from moisture (Le. vases) and excess heat (e.g. a fireplace) or equipment creating strong magnetic or electric fields. Unplug the power cable from the AC wall socket if the unit malfunctions. Your product is not intended for industrial use. Itis for personal use only. Condensation may occur if your product has been stored in cold temperatures. Iftransporting the unit during the winter, wait approximately 2 hours until the unit has reached room temperature before using

5. The battery used with this product contains chemicals that are harmful to the environment. Do not dispose of the battery in the general household trash. Do not expose the battery to excess heat, direct sunlight, or fire. Do not short circuit, disassemble, or overheat the battery. Danger of explosion if the battery is replaced incorrectiy. Replace only with the same or equivalent type

ABOUT THIS MANUAL The user manual has two parts: this simple paper USER MANUAL and a detailed FULL MANUAL you can download

USER MANUAL See this manual or safety instructions, product installation, components,

connections, and product specifications

SS FULL MANUAL You can access the FULL MANUAL on Samsungs on-line customer support centre by scanning the QR code. To see the manual on your PC or mobile device, download the manual in document format from Samsung's website. (http://www.samsung.com/support)

Design and specifications are subject to change without prior notice.

Checking the Components Inserting battery into the Remote Control Product Overview

Front / Right Side Panel of the Soundbar

Bottom Panel of the Soundbar The Remote Control

Using the Hidden Buttons (Buttons with more than one function)

Adjusting the Soundbar volume with a TV remote control Connecting the Soundbar

Connecting Electrical Power

Connecting to a TV Connecting using an Optical Cable Connecting a TV or Bluetooth Device via Bluetooth

Using the Samsung Audio Remote App

Connecting an External Device

Connecting using an Optical Cable

Connecting using an Analogue Audio (AUX) Cable

Connecting a USB Storage Device

Specifications and Guide

Soundbar Main Unit Power Cord Remote Control / Battery (AAAx1, Not available in some locations)

+ User Manual / Warranty Card / Regulatory Guide (Not available in some locations).

+ For more information about the power supply and power consumption, refer to the label attached to the product. (Label: Bottom of the Soundbar Main Unit)

<_ To purchase additional components or optional cables, contact a Samsung Service Centre or Samsung Customer Care.

+ The appearance of the accessories may differ slightly from the illustrations above.

Inserting battery into the Remote Control

Match the polarity of the battery to the symbols on the battery compartment.

02 PRODUCT OVERVIEW Front / Right Side Panel of the Soundbar

Position the product so that the SAMSUNG logo is located on the top.

Front of the Soundbar Right Side of the Soundbar

The LED Indicator flashes, glows, or changes colour depending on the Soundbar's current mode or status. The colour ofthe LED indicator and the number of lights indicate the active

mode as described below. Or LED Ocreen LED

@Ohirite LED Remote control ne Mode LEDindicator Button Bluetooth Slow-Blinking Disconnected status Bluetooth Fast-Blinking pairing

press and hold the EE button for more than 5 seconds.

Bottom Panel of the Soundbar

Bottom ofthe Soundbar

EN | POWER | Connectthe Soundbar's AC power cord

AUX Connect to the Analogue output of an external device.

DIN Connect to the digital (optical) output of an external device.

EE) USB | ConnectaUSB device here to play music files onthe USB device through the Soundbar.

When you plug in the AC cord, the power button will begin working in 4 to 6 seconds.

When you turn on this unit, there will be a 4 to 5 second delay before it produces sound.

If you want to enjoy sound only from the Soundbar, you must turn off the TV's speakers in the Audio Setup menu of your TV. Refer to the owner's manual supplied with your TV.

When disconnecting the power cord from a wall outlet, pull the plug. Do not pull the cable.

Do not connect this unit or other components to an AC outlet until all connections between components are complete.

03 THE REMOTE CONTROL

+ Theimages, buttons, and functions of the remote control may differ depending on the model

Press this button to mute the sound.

Press it again to unmute the sound Turns the Soundbar on and off.

|— Push this button up or down to adjust the bass volume within a -6 to +6 range.

Press toselectthe desired sound effect by choosing SURROUND or STANDARD.

Push this button up or down to

adjustthe volume. f— Presste enter the "AUX" mode.

Press to enter the Bluetooth” mode.

You can use your Bluetooth device in this mode.

To pair a new Bluetooth device, press and hold this button for 5 seconds or more.

previous music file. Press the [ER button to play/pause a music file

Press the (E button to select the next music file.

Press to enter the"D.IN’ mode.

[— Press this button to turn offthe Auto

Power Link function Press this button to turn on the

Auto Power Link function. See SAMSUNG “Connecting using an Optical Cable’ on pages 14 and15

— Press to enter the "USB" mode.

Using the Hidden Buttons (Buttons with more than one function)

Remote Control Button

How to Use the Remote Control

Atthe AUX mode press the +] button for 5 seconds in the power on station to trigger/shut off the Auto Power Down function. The unit turns off automatically in the following situations. — DIIN/BT/USB Mode : Ifthere is no audio signal for 5 minutes. — AUX Mode — _Ifthe Audio (AUX) Cable is disconnected for 5 minutes. —_ lfthereis no KEY input for 8 hours when the Audio (AUX) Cable is connected. (Auto Power Down function can be turned off only in that case.)

Down On/Off (AUX mode) —_ Toturn off Auto Power Down function, while in "AUX" mode, press and hold the Le] button for 5 seconds. LED indicator Blinking Blinking Auto Power Down On Auto Power Down Off TV Connect For detailed information about TV Connect, please see "Disconnecting

the Soundbar from the TV” on page 17.

Press the [button for 5 seconds in the standby power offstation to trigger the system initial function. LED indicator

Initialise sen (_ stirking ) TV remote S contrat onofr | For detailed information about TV remote contral please see Adjusting V n bis (Geandp | te Seundbar volume witha TV remote control on page 12

Bluetooth Power On/off

button for 5 seconds inthe power on station to trigger the Bluetooth Power On/Off function.

Adjusting the Soundbar volume with a TV remote control

If you have a Samsung TV, you can adjust the Soundbar’s volume using the IR remote control that came with your Samsung TV. First use the TV menu to set the TV audio on your Samsung TV to external speakers, then use your

Samsung remote to control the Soundbar's volume. For more information, see the TV's user manual.

The default mode for this function is control by a Samsung TV. 1. lyour TV is not a Samsung TV and you want your TV's remote to control the Soundbar's volume, you can change the settings of this function by pressing and holding the BASS BA button repeatedly, To have your TV's remote adjust the Soundbar's volume, follow Steps 1 through 3

2. If you want to turn off this function completely, follow Steps 1 and 2

Mode Remote control Button LED indicator FLO d PARTS e 2. “off” mode ns ? OIDIOIO 3. “ALLTV” mode NP OLOLO1O à “Samsung TV” mode | (Default mode) O\0\0®

—_ Each time you press the BASS Bbutton and hold it for 5 seconds, the mode switches in the following orderSamsung TV” (Default mode) >"Off"->"AILTV”

= The LED'S blink for 3-4 seconds, then return tothe standby power off mode

—_ This function may not be available, depending on your TV°s remote control.

= Manufacturers supporting this function: VIZI0, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA,

GRUNDIG, Hisense, RCA ENG -12

04 CONNECTING THE SOUNDBAR Connecting Electrical Power

+ For information about the required electrical power and power consumption, refer to the Label attached to the product. (Label : Bottom of the Soundbar Main Unit)

05 CONNECTING TO ATV Hear TV sound from your Soundbar through wired or wireless connections. + When the Soundbar is connected to selected Samsung TVS, you can control the Soundbar using the TV's remote control — This feature is supported by 2017 and later Samsung Smart TVs that support Bluetooth when you connect the Soundbar to the TV using an optical cable. — This function also allows you to use the TV menu to adjust the sound field and various settings as well as the volume and mute.

Connecting using an Optical Cable

Step 1. Connect an Optical Cable

OPTICAL OUT Optical Cable

{notsupplied) EE ———

NOTE — When the audio in a broadcast is encoded in Dolby Digital and the “Digital Output Audio Format” on your TV is set to PCM, we recommend that you change the setting to Dolby Digital. When the setting on the TV is changed, you will experience better sound quality. (The TV menu may use different words for Dolby Digital and PCM depending on the TV manufacturer.)

This Function automatically turns on the Soundbar when the TV is turned on if the Soundbar is connected to the TV by an Optical Cable (not supplied) Pressthe

D button on the remote control to turn on this function.

+ Auto Power Link is set to ON by default. (To turn off this function, press the remote control.)

+ Depending on the connected device, Auto Power Link may not function <_ This function is only available in the “D.IN” mode.

NOTE — You cannot connect more than one TV or Bluetooth device at a time.

Step 3. Check the Soundbar's status

The blue LED should not be blinking once the Bluetooth connection is complete.

Ifthe TV or device fails to connect +_Ifa previously connected Soundbar listing appears in the device list of your TV or Bluetooth device, delete it. (e.9."[AV] Samsung Soundbar Nxxx N-Series') «Then repeat steps 1 through 3.

Disconnecting the Soundbar from the TV Press the (a button on the right side panel or on the remote control and switch to any mode but “Bluetooth” + Disconnecting takes time because the TV must receive a response from the Soundbar. (The time required may differ, depending on the TV model.) + To cancel the automatic Bluetooth connection between the Soundbar and TV, press and hold | button for 5 seconds in “Bluetooth” mode. TV Connect is turned OFF. + To turn TV Connect back on, press and hold the Le | button for 5 seconds with the Soundbar in “Bluetooth” mode. + TV Connect is set to ON by default.

OI0IURRO TV Connect-ON NOTES —_ifasked for a PIN code when connecting a Bluetooth device, enter <0000> —_ In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Soundbar and the Bluetooth device exceeds 10 meters — The Soundbar automatically turns off after 5 minutes in the Ready state — The Soundbar may not perform Bluetooth search or connection correctly under the following circumstances: = Ifthere is a strong electrical field around the Soundbar. —_ several Bluetooth devices are simultaneously paired with the Soundbar. = Ifthe Bluetooth device is turned off, not in place, or malfunctions. —_ Electronic devices may cause radio interference. Devices that generate electromagnetic waves must be kept away from the Soundbar main unit - e.g, microwaves, wireless LAN devices, etc. = The Soundbar supports SBC data (44.1kHz, 48kHe). = Connect only to a Bluetooth device that supports the A2DP (AV) function = You cannot connect the Soundbar to a Bluetooth device that supports only the HF (Hands Free) function:

— Once you have paired the Soundbar to a Bluetooth device, selecting “[AV] Samsung Soundbar Nxxx N-Series” from the devices scanned devices list will automatically change the Soundbar to “BT" mode.

— Available only if the Soundbar is listed among the Bluetooth device's paired devices. (The Bluetooth device and the Soundbar must have been previously paired at least once.)

— The Soundbar cannot be paired to another Bluetooth device if already in Bluetooth mode and paired to a Bluetooth device.

If a previously paired Bluetooth device tries to pair with the Soundbar when the Bluetooth Power function is on and the Soundbar is turned off, the Soundbar turns on automatically.

Press and hold the EE button for more than 5 seconds on the remote while the Soundbar is turned

on + Bluetooth Power function is set to On by default.

More About Bluetooth Bluetooth is a technology that enables Bluetooth-compliant devices to interconnect easily with each other using a short wireless connection. + _A Bluetooth device may cause noise or malfunction, depending on usage, if. — Apart of your body is in contact with the receiving/transmitting system of the Bluetooth device or the Soundbar. —_tis subject to electrical variation from obstructions caused by a wall, corner, or office partition. — _Itis exposed to electrical interference from same frequency-band devices including medical equipment, microwave ovens, and wireless LANs. +_ Pair the Soundbar with the Bluetooth device while they are close together. + _The further the distance between the Soundbar and Bluetooth device, the worse the quality is. Ifthe distance exceeds the Bluetooth operational range, the connection is lost. +_In poor reception areas, the Bluetooth connection may not work properly. +_The Bluetooth connection only works when it is close to the unit. The connection will be automatically cut off if the Bluetooth device is out of range. Even within range, the sound quality may be degraded by obstacles such as walls or doors. + This wireless device may cause electric interference during its operation:

Using the Samsung Audio Remote App

Installing the Samsung Audio Remote App

To control the Soundbar with your smart device and the Samsung Audio Remote app, download the

Samsung Audio Remote app from the Google Play store

Market search: Samsung Audio Remote GETITON Google Play

Launching the Samsung Audio Remote App

To launch and use the Samsung Audio Remote app, touch the Audio Remote icon on your smart device,

and then follow the directions on the screen.

+ The Samsung Audio Remote app is only compatible with Android mobile phones and mobile devices

running Android OS 3.0 or later.

06 CONNECTING AN EXTERNAL DEVICE Connect to an external device via an optical cable or analogue cable to play the external device's sound through the Soundbar.

Connecting using an Optical Cable

Step 1. Connect using an Optical Cable

BD / DVD player /Set-top box / Game console

Optical Cable (notsupplied)

Bottom ofthe Soundbar

BD / DVD player /Set-top box / Game console

) (e) D Audio (AUX) Cable —__—

R - AUDIO - L {not supplied) Bottom of the Soundbar

V NOTE — The Soundbar automatically turns off (Auto Power Off) if you do not connect a USB device to the Soundbar within 5 minutes.

When the Soundbar is in “USB” mode, each time you press the button the “USB” mode changes how it plays tracks in the following order: Repeat - Off > Repeat - 1 song > Repeat - All songs > Repeat - Random. See the table below for details.

«_Ifthere are too many folders and files stored on the USB device, it may take the Soundbar some time to access and play files

08 INSTALLING THE WALL MOUNT (OPTIONAL)

Installation Precautions

Install on a vertical wall onty, Do not instal in a place with high temperature or humidity.

Verify whether the wall is strong enough to support the products weight. If not, reinforce the wall or choose another installation point

Purchase and use the fixing screws or anchors appropriate for the kind of wall you have (plaster board, iron board, wood, etc.)

If possible, fixthe support screws into wall studs, Purchase wall mounting screws according to the type and thickness of the wall you want to mount the Soundbar on.

= Length: 35 mm or longer recommended,

Connect cables from the unit to external devices before you install the Soundbar on the wall

Make sure the unit is turned off and unplugged before you install it. Otherwise, it may cause an electric shock

Wall mount Components

For Installation on Concrete Walls {not supplied)

Recommended specification

NOTE —_ Installations on other types of walls will require

different kinds of screws.

NOTES = Hyour TVisinstalled on ) the wall, install the (

Soundbar 5cm or more below your TV.

= Use a pencil to mark the holes’ positions.

= The installation method shown here is for CONCRETE walls. Installation methods will vary depending on the wall type. For installation on dry wall, we strongly recommend you drillscrew support holes into the underlying wood studs,

NOTE À CAUTION — Supports for wall installation are built into

the back ofthe Soundbar. — Press the Soundbar down with sufficient

force to fix it to the wall. Ifthe Soundbar is not firmly fixed to the wall, it could be accidently detached, resulting in personal injury.

— Do not bump into or strike the Soundbar (especially from the bottom). The impact could detach the Soundbar from the wall, resulting in personal injury.

09 SOFTWARE UPDATE Samsung may offer updates for the Soundbar's system firmware in the future.

Bottom of the Soundbar

If an update is offered, you can update the firmware by connecting à USB device with the firmware update stored on it to the USB port on your Soundbar. For more information about how to download update files, go to the Samsung Electronics website at (www.samsung.com + Support). Then, enter or select the model number of your Soundbar, select the Software & Apps option, and then Downloads. Note that the option names can var.

1. Follow the steps below to download the product software: Go to the Samsung website at (samsung.com) — search for the model name - select the customer support option (the option name is subject to change)

2. Save the downloaded software to a USB stick and select “Extract Here” to unzip the folder.

3. Turn off the Soundbar and connect the USB stick containing the software update to the USB port.

4. Disconnect the power cord, reconnect it, and then turn on the Soundbar.

5. Turn on the soundbar and select mode to USB. Within 3minutes, 4 white LEDs on and update begins.

6. When the update finishes, the Soundbar turns off. Press the WEB button on the remote control for 5 seconds. Al LEDs blink 2 times and then the Soundbar turns off. The update is complete.

+_lfthe firmware fails to update, you can update the firmware again.

1. Turn off the Soundbar, disconnect and then reconnect the USB storage device that contains the update files to the Soundbar's USB port.

2. Disconnect the Soundbar's power cord, reconnect it, and then turn on the Soundbar.

+ Updating firmware may not work properly if audio files supported by the Soundbar are stored in the USB storage device.

Do not disconnect the power or remove the USB device while updates are being applied. The main unit will turn off automatically after completing the firmware update.

After update is completed, the user setup in Soundbar is initialised. We recommend

you write down your settings so that you can easily reset them after the update. If the software update fails, check if the USB stick is defective.

Mac OS users should use MS-DOS (FAT) as the USB format.

Updating via USB may not be available, depending on the USB storage device manufacturer.

10 TROUBLESHOOTING Before seeking assistance, check the following

The unit will not turn on.

Is the power cord plugged into an outlet? — Connect the power plug to an outlet.

Afunction does not work when the button is pressed.

Is there static electricity in the air? — Disconnect the power plug and connect it again

Sound dropouts occur in Bluetooth mode.

— See the Bluetooth connection sections on pages 16 and 17.

Soundis not produced.

Isthe Mute function on?

— Press the VOL button to cancel the function. Is the volume set to minimum?

The remote control does not work.

Isthe battery drained?

— Replace with new batteries

Isthe distance between the remote control and Soundbar main unit too far? — Move the remote control closer to the Soundbar main unit

DOLBY AUDIO To send inquiries and requests regarding open sources, contact Samsung via Email

Manufactured under license from Dolby

(oss.request@samsung.com)

Laboratories. Dolby, Dolby Audio, Pro Logic, and

the double-D symbol are trademarks of Dolby Laboratories.

NOTES ABOUT For DTS patents, see http:/patents.dts.com Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS in combination with the Symbol, and DTS 2.0 Channel are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. AL Rights Reserved

SERVICE Figures and'illustrations in this User Manual are provided for reference only and may differ from actual product appearance.

An administration fee may be charged if

either (a) an engineer is called out at your request

andthere is no defect with the product (ie where the user manual has not been read) {b) you bring the unit to a repair centre and there is no defect with the product (ie. where the user manual has not been read)

You will be informed of the administration fee amount before a technician visits.

14 SPECIFICATIONS AND GUIDE Specifications Model Name HW-N300 USB 5V/0.5A Weight 20kg Dimensions (W x H x D) 641.0 x 65.0 x 107.0 mm

Operating Temperature Range +5°Cto +35°C Operating Humidity Range

Supported play formats {DTS 2.0 sound is played in DTS format)

(supporting Dolby® Digital), DTS WIRELESS DEVICE OUTPUT POWER BT max transmitter power

Overall Standby Power Consumption (W)

Press and hold the Sseconds to turn off Bluetooth Power function

button for more than

Press and hold the button for more than

Sseconds to turn on Bluetooth Power function

— Samsung Electronics Co, Ltd reserves the right to change the specifications without notice.

— Weight and dimensions are approximate.

with Directive 2014/53/EU:

+ Hereby, Samsung Electronics, declares that this equipment is in compliance C €

The full text of the EU declaration of conformity is available at the following

internet address: http:/www.samsung.com go to Support > Search Product

Support and enter the model name

This equipment may be operated in all EU countries.

K [Correct disposal of batteries in this product]

(Applicable in countries with separate collection systems)

This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste atthe end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66.

batteries are not properly disposed of, these substances can cause harm to human health or the environment.

To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.

KX Correct Disposal of This Product

(Waste Electrical & Electronic Equipment) = (Applicable in countries with separate collection systems) This marking on the product, accessories or Literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

For information on Samsung's environmental commitments and product specific regulatory obligations e.g. REACH, WEEE, Batteries, visit http:/www.samsung.com/uk/aboutsamsung/samsungelectronics/corporatecitizenship/data_corner.html

11 LICENCE DOLBY AUDIO Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.

For DTS patents, see http:/patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS in combination with the Symbol, and DTS 2.0 Channel are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. Al Rights Reserved

+ N. AudioRemot} | = —. ©

DOLBY AUDIO Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.

For DTS patents, see http:/patents.dts.com Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS in combination with the Symbol, and DTS 2.0 Channel are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. AL Rights Reserved

DOLBY AUDIO Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.

For DTS patents, see http:/patents.dts.com Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS in combination with the Symbol, and DTS 2.0 Channel are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. AL Rights Reserved

DOLBY AUDIO Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.

For DTS patents, see http:/patents.dts.com Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS in combination with the Symbol, and DTS 2.0 Channel are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. AL Rights Reserved

© 2018 Samsung Electronics Co, Ltd. AlLrights reserved.

Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care Centre

Contact Centre Web Site Contact Centre & Web Site

support wusamsung com uk 00072678 64(0800-saMsuNç) [er (Game

support(Dutch) isamsungeom/