8 - Cellphone ONEPLUS - Free user manual and instructions

USER MANUAL 8 ONEPLUS

Restrictions in 5GHz band

India Regulatory Conformance

will not occur in a particular installation. If this unauthorized modifications or changes to this equipment does cause harmful interference to radio equipment. Such modifications or changes could or television reception, which can be determined by void the user's authority to operate the equipment. turning the equipment off and on, the user is NOTE: This equipment has been tested and found encouraged to try to correct the interference by one to comply with the limits for a Class B digital or more of the following measures: radio

interference caused harmful interference

radio - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• The antenna(s) used for this transmitter must not be collocated or operate in conjunction with any other antenna or transmitter.
• The country code selection is for non-US model only and is not available for all US models. Per FCC regulation, all Wi-Fi products marketed in US must be fixed to US operation channels only. - Consult the dealer or an experienced radio/TV technician for help. RF Exposure Information (SAR) FCC Caution

• This device is designed and manufactured not to exceed the emission limits for exposure to radio

• Any changes or modifications not expressly frequency (RF) energy set by the Federal approved by the party responsible for compliance Communications could void the user’s authority to operate the Government. equipment. Commission

• The SAR limit set by the FCC is 1.6W/kg. The to use only the power required to reach the network. highest SAR value of this device type complies In general, the closer you are to a wireless base with this limit. And please see the “Quick Start station antenna, the lower the power output. Guide” to find the highest SAR value reported to FCC.
• Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands.

• While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement.
• This device has also been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and positions the

• Although the SAR is determined at the highest handset a minimum of 15mm from the body. Use of certified power level, the actual SAR level of the other accessories may not ensure compliance with device while operating can be well below the FCC RF exposure guidelines. Position the handset maximum value. This is because the device is a minimum of 15mm from your body when the designed to operate at multiple power levels so as device is switched on.

• Choose the belt clips, holsters, or other similar

• The FCC has adopted HAC rules for digital body-worn accessories which do not contain wireless phones. These rules require certain phone metallic components to support the minimum to be tested and rated under the American National distance of body-worn operation. Cases with metal Standard Institute (ANSI) C63.19-2011 hearing aid parts may change the RF performance of the device, compatibility standards. including its compliance with RF exposure guidelines, in a manner that has not been tested or certified, and use such accessories should be avoided.

• The ANSI standard for hearing aid compatibility contains two types of ratings.
• M-Ratings: Rating for less radio frequency interference to enable acoustic coupling with Hearing Aid Compatibility (HAC) hearing aids. regulations for Mobile phones

• T-Ratings: Rating for inductive coupling with hearing aids in tele-coil mode.

• Your phone is compliant with the FCC Hearing Aid Compatibility requirements.

• Not all phones have been rated, a phone is considered hearing aid compatible under FCC rules if it is rated M3 or M4 for acoustic coupling and T3

• This phone has been tested and rated for use with or T4 for inductive coupling. These ratings are hearing aids for some of the wireless technologies given on a scale from one to four, where four is the that it uses. However, there may be some newer most compatible. Your phone meets the M3/T3 wireless technologies used in this phone that have level rating. not been tested yet for use with hearing aids. It is

• However, hearing aid compatibility ratings don't guarantee that interference to your hearing aids won't happen. Results will vary, depending on the level of immunity of your hearing device and the degree of your hearing loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a rated phone successfully. Trying out the phone with your hearing device is the best way to evaluate it for your personal needs. important to try the different features of this phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Consult your service provider or the manufacturer of this phone for information on hearing aid compatibility. If you have questions about return or exchange policies, consult your service provider or phone retailer.
• Hearing devices may also be rated. Your hearing device manufacturer or hearing health professional may help you find this rating. For more information about FCC operation of the device. Le présent appareil est conforme aux CNR Hearing Aid Compatibility, please go to d'Industrie Canada applicables aux appareils radio http://www.fcc.gov/cgb/dro. exempts de licence. L'exploitation est autorisée aux Industry Canada Conformance IC Statement This device complies with Industry Canada's license exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired deux conditions suivantes (1) l'appareil ne doit pas produire de brouillage, et. (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This device complies with the Canadian ICES-003 Class B specifications. CAN ICES-3(B)/ NMB3(B). Cet appareil numérique de la Canadian ICES-003. In addition, high-power radars are allocated as Cet appareil numérique de la classe B est conforme primary users (i.e. priority users) of the bands 5250- à la norme NMB-003 du Canada. 5350 MHZ and 5650- 5850 MHz and that these radars could cause interference and/or damage to Restrictions in 5GHz band The device could automatically LE-LAN devices. discontinue -Les dispositifs fonctionnant dans la bande 5150- transmission in case of absence of information to 5250 MHz sont réservés uniquement pour une transmit, or operational failure. Note that this is not utilisation a l'intérieur afin de réduire les risques de intended to prohibit transmission of control or brouillage préjudiciable aux systèmes de satellites signaling information or the use of repetitive codes mobiles utilisant les mêmes canaux. -De plus, les where required by the technology. The device for utilisateurs devraient aussi être avises que les operation in the band 5150-5250 MHz is only for utilisateurs de radars de haute puissance sont indoor use to reduce the potential for harmful désignés utilisateurs principaux (c.-à-d., qu’ils ont interference to co-channel mobile satellite systems; la priorité) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs compliance with ISED RF exposure guidelines. LAN-EL) Position the handset a minimum of 15mm from RF Exposure Information (SAR) The SAR limit set by the ISED is 1.6W/kg. The highest SAR value of this device type complies with this limit. And please see the “Quick Start Guide” to find the highest SAR value reported to the IC. your body when the device is switched on. Déclaration d’exposition aux radiations : Le produit est conforme aux limites d’exposition pour les appareils portables RF pour les Etats Unis et le Canada établies pour un environnement non contrôlé. Le produit est sûr pour un fonctionnement tel que décrit dans ce manuel. La réduction aux This device has also been tested and meets the expositions RF peut être augmentée si l’appareil ISED RF exposure guidelines for use with an peut être conservé aussi loin que possible du corps accessory that contains no metal and positions the de l’utilisateur ou que le dispositif est réglé sur la handset a minimum of 15mm from the body. puissance de sortie la plus faible si une telle Use of other accessories may not ensure fonction est disponible. Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et

1. Lead (Pb) – not over 0.1% by weight;

2. Cadmium (Cd) – not over 0.01% by weight;

utilisé avec un minimum de 15mm de distance entre

3. Mercury (Hg) – not over 0.1% by weight;

la source de rayonne

4. Hexavalent chromium (Cr6+) – not over 0.1% by

India Regulatory Conformance weight;

5. Polybrominated biphenyls (PBBs) – not over 0.1%

E-waste Information The products manufactured by OnePlus comply with the E-waste Rules 2016 and its amendments. Considering the exemption listed in SCHEDULE II of the E-waste Rules, the content of hazardous substances is as follows: by weight;

6. Polybrominated diphenyl ethers (PBDEs) – not

over 0.1% by weight. For the purpose of recycling and reducing the effect of the environment, the Electrical & Electronic Equipment should not be disposed of with other Email：info@attero.in Phone：1800-103-6328 household waste, please separate these items from other types of waste and recycle them to the authorized e-waste company. As a part of E-waste recycling initiative, OnePlus has partnered with two Exigo: Website: www.exigorecycling.com authorized E-waste companys named AS Attero Email: info@exigorecycling.com and Exigo. You can contact AS Attero or Exigo to Toll Free: 1800-102-5018 recycle your E-waste product. For further information about the OnePlus E-waste partner, you can contact at Attero: Website：www.attero.in Languages & Input You can choose your language according to the following steps: Settings > System > Languages & input > Languages > Choose your preference language. Mobile phone supports all the below mentioned Indian Official Languages for readability test as per IS 16333(Part-3):2017 ASSAMESE, BANGLA, BODO, DOGRI, GUJARATI, HINDI, KANNADA, KASHMIRI, KONKANI, MAITHILI, MALAYALAM,