CMDN 182 EU - CANDY - Free user manual and instructions

Find the device manual for free CMDN 182 EU CANDY in PDF.

View the manual :

Manual assistant

Waiting for your message

Product information

Brand : CANDY

Model : CMDN 182 EU

Download the PDF manual Print

Download the instructions for your in PDF format for free! Find your manual CMDN 182 EU - CANDY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CMDN 182 EU by CANDY.

USER MANUAL CMDN 182 EU CANDY

INSTRUCTION MANUAL Model No.: CMDN 182 EU 1

suggest you keep these

Thank you for purchasing this product.

Before using your refrigerator, please carefully read

instructions in a safe place

this instruction manual in order to maximize its performance.

for easy reference and a

subsequent use or for other owners. This product is intended solely for household use or similar

good experience with the

applications such as: the kitchen area for personnel in shops, offices and

other working environments on farms, by clientele of hotels, motels and other

The refrigerator contains a

environments of a residential type

at bed and breakfasts (B & B)

for catering services and similar applications not for

isobutane) and insulating

This appliance must be used only for purposes of storage of food, any other use is considered

dangerous and the manufacturer will not be responsible

high compatibility with the

recommended that you take note of the warranty conditions. Please, to obtain the best possible

performance and trouble free operation from your appliance it is very important to carefully read these

however, inflammable.

instructions. Failure to observe these instructions may invalidate your right to free service during the

Caution: risk of fire

This guide contains many important information.

Avoid opening flames and sources of ignition. 17

not designed for such use.

room in which the appliance

You could injure yourself or

damage the appliance.

Make sure that mains cable

Care must be taken while

is not caught under the

appliance during and after

appliance to avoid touching

the condenser metal wires

at the back of the appliance,

mains cable becoming cut or

as you might injure your

damage your product.

appliance take care not to not

damage your flooring, pipes,

designed for stacking with

wall coverings etc. Do not

any other appliance. Do not

attempt to sit or stand on

pulling by the lid or handle.

top of your appliance as it is

Do not allow children to play

for less than 20 hours. If the

tamper with the controls.

failure is longer, then the

Our company declines to

food should be checked and

accept any liability should

cooked and then refrozen.

If you find that the lid of the

Do not install the appliance

chest freezer is difficult to

in humid, oily or dusty

open just after you have

places, nor expose it to

closed it, don't worry. This is

direct sunlight and to water.

Do not install the appliance

near heaters or inflammable

equalize and allow the lid to

be opened normally after a

If there is a power failure do

Frozen food should not be

appliance to the electricity

affected if the failure lasts

supply until all packing and

transit protectors have been

that it will deteriorate or an

uncontrolled reaction may

Leave to stand for at least 4

hours before switching on to

risks.Before performing any

allow compressor oil to

operation, unplug the power

cord from the power socket.

On delivery, check to make

must only be used for its

sure that the product is not

damaged and that all the

parts and accessories are in

edible foodstuff). Do not

store medicine or research

If in the refrigeration system

a leak is noted, do not touch

Coolers. When the material

the wall outlet and do not

that requires a strict control

use open flames. Open the

of storage temperatures is

window and let air into the

to be stored, it is possible

room. Then call a service

center to ask for repair. Do

not use extension cords or

adapters. Do not excessively

pull or fold the power cord

alcohol, etc. These materials

or touch the plug with wet

may cause an explosion.

hands. Do not damage the

plug and/or the power cord;

inflammable sprays, such as

this could cause electrical

spray paint, near the Wine

Coolers. It could cause an

cord is damaged, it must be

Do not place objects and/or

containers filled with water

agent or similarly qualified

on the top of the appliance.

person in order to avoid a

We do not recommend the

hazard. Do not place or

use of extension leads and

multi-way adapters. Do not

highly volatile materials such

dispose of the appliance on

a fire. Take care not to

electrical appliances inside

appliance in transportation

appliance, unless they are of

and in use. In case of

the type recommended by

damage do not expose the

the manufacturer. Do not

appliance to fire, potential

immediately ventilate the

mechanical devices or other

room where the appliance is

means to accelerate the

defrosting process, other

than those recommended by the manufacturer.

inside the Wine Coolers

appliances inside the food

Therefore, avoid damaging

the tubes. Do not use

unless they are of the type

Do not scrape with a knife or

manufacturer. Do not touch

sharp object to remove frost

internal cooling elements,

especially with wet hands,

With these, the refrigerant

to avoid cracks or injuries.

circuit can be damaged, the

spill from which can cause a

openings in the appliance

fire or damage your eyes.

enclosure or in the built-in

devices or other equipment

to hasten the defrosting

Do not use pointed or sharp-

process. Absolutely avoid

edged objects such as knives

the use of open flame or

or forks to remove the frost.

electrical equipment, such

as heaters, steam cleaners,

electrical heaters or other

candles, oil lamps and the

such electrical appliances

like in order to speed up the

Never use water wash the

compressor position, wipe it

correctly installed, located

with a dry cloth thoroughly

and operated in accordance

after cleaning to prevent

It is recommended to keep

the plug clean, any excessive

dust residues on the plug

The guarantee is applicable

can be the cause fire.

only to new products and is

The product is designed and

built for domestic household

Our company disclaims any

liability for incidental or

the product is installed or

consequential damages.

used in commercial or non-

The guarantee does not in

statutory or legal rights.

Do not perform repairs on

experience and knowledge;

provided that they have

supervision or instruction

interventions performed

qualified personnel.

concerning how to use the

If you are discarding an old

appliance in a safe way and

product with a lock or latch

fitted to the door, ensure

that it is left in a safe

Children should not play with

condition to prevent the

the appliance. Cleaning and

entrapment of children.

user maintenance should not

This appliance can be used

be made by children without

by children aged from 8

years and above and by

Locks :If your Fridge/Freezer

is fitted with a lock, to

physical, sensory or mental

capabilities or with a lack of

entrapped keep the key out

of reach and not in the vicinity of the appliance. If disposing

Fridge/Freezer break off any old locks or latches as a safeguard.

INTRODUCTION Before use

Please read these instructions and the Safety guidelines on page 1 carefully before using your new Freezer. The Freezer is for indoor, domestic use only.

Leveling the Freezer

If the Freezer is not level, the door and magnetic seal alignment will be affected and may cause you Freezer to work incorrectly. Once the Freezer is placed in its final location, adjust the leveling feet at the front by turning them.

Refrigerator Glass Shelf

Upper Freezer Drawer

Bottom Freezer Drawer

INSTALLATION Location

When selecting a position for your Freezer you should make sure the floor is flat and firm, and the room is well ventilated with an average room temperature of between 16℃ and 38℃. Avoid locating your Freezer near a heat source, eg, cooker, boiler or radiator. Also avoid direct sunlight in out-buildings or sun lounges. If you are placing your Freezer in an out-building such as a garage or annex ensure that the Freezer is placed above the damp course, otherwise condensation will occur on the Freezer cabinet. Never place the Freezer in a wall recessed or into fitted cabinets or fumiture when your Freezer is working, the grille at the back may become hot and the sides warm. It must therefore be installed so that the back of the Freezer has at least 9cm(31/2”) of free space and the sides have 3cm(3/4”). Do not drape the Freezer with any covering.

Wipe the inside of the Freezer with a weak solution of bicarbonate of soda. Then rinse with warm water using a damp sponge or cloth. Wash the baskets and shelves in warm soapy water and dry completely before replacing in the Freezer. The external parts of the Freezer can be cleaned with wax polish. See page

9 for more details on cleaning. Before plugging in YOU MUST Check that you have a socket which is compatible with the plug supplied with the Freezer. If not see the section called ELECTRICAL INFORMATION . Before switching on! DO NOT SWITCH ON UNTIL FOUR HOURS AFTER MOVING THE FREEZER. The coolant fluid needs time to settle. If the appliance is switched off at any time, wait 30 minutes before switching back on to allow the coolant fluid to settle. Before filling your Freezer Before storing foods in your Freezer, turn the Freezer on and wait for 24 hours, to make sure it is working properly and to allow the Freezer to fail to the correct temperature.

1. Keys 1.1 Display panel

Freezer zone Digital temperature display "Pure Tech Light" icon "Fast freezing" icon "Holiday" icon "Eco" icon "Temp. zone" button "Function" button

"Lock/unlock" button

1.2 Single key operation

1.2.1 ‘Temp. Zone’ key 1）This key is to select the temperature zone, and the temperature zone changes each time the key is pressed, with the temperature of the selected zone displayed by digits. 2）The temperature zone selection changes through the following cycle: Fridge → Freezer →Fridge ; 3）Every time when settings are finished (with no flickering any more), if the ‘Temp. Zone’ key is pressed again, ‘Fridge’ starts flickering first. 1.2.2 ‘Temp.’ key 1 ） Under the temperature setting state, if the temperature zone is selected to be Fridge (with patterns of both the left and the right fridge doors flickering at the same time), press the ‘Temp.’key, then the two digits starts flickering, which takes effect when the ‘OK’ key is pressed; and if the temperature zone is selected to be Freezer (with patterns of both the left and the right freezer doors flickering at the same time and the ‘-’sign illuminated), set the freezer temperature by reference to the fridge temperature setting. The temperature will rise by 1℃ with each key response, which can be set in a cyclic manner. 2) Adjustable temperature range for each compartment： Fridge compartment: 08～02; Freezer compartment: -16～-24; The default value for each compartment when the refrigerator is energized for the first time: Fridge compartment temperature is 05, and freezer compartment temperature -18. Fridge OFF: When the fridge temperature is set, the temperature setting progresses through the following cycle. 2℃→3℃→4℃→5℃→6℃→7℃→8℃→OF→2℃ (‘OF’ represents the OFF state, and when the OF setting takes effect, the fridge will be shut off, with no refrigeration request.)

1.2.3 ‘Function’ key

The selected functionchanges with each key response. Function selection changes through the following cycle: Pure Tech Light → Quick Freezer → Holiday → Eco→ Pure Tech Light; Every time when the function setting is finished, if the ‘Function’ key is pressed again, ‘Pure Tech Light’ starts flickering first. When a function has not been set, press this key to select the function, and then press the ‘Ok’ key, the selected function is enabled. When a function has been enabled, press this key to select the function, and then press the OK key, the enabled function gets exited. 1.2.4 ‘OK’ key Under the state of function selection or temperature setting, the selected function or the set temperature value comes into force when this key is pressed, with the corresponding flickering stopped immediately. Under the function selection or the temperature setting state, if this key is not pressed within 5 seconds, flickering gets stopped, with the selected function or the set temperature value invalid. 1.2.5 ‘Unlock’ key Under the state of keys being locked, keys can be unlocked by holding down this key for 3s. 1.3 Key combination operation 1.3.1 Hold down the ‘Unlock’ key, and then press the ‘Function’ key for more than 3S, you can access the parameter setup program. 1.3.2 Hold down the ‘Unlock’ key, and then press the ‘OK’ key for more than 5S, you can access the maintenance program. 1.3.3 Hold down the ‘Unlock’ key, and then press the ‘Temp.’ key for more than 3S, you can access the hardware self-check program. 1.4 Function program rules 1.4.1 ‘Quick Freeze’ function 1) To enter ‘Quick Freeze’ Refer to the ‘Single Key Operation’; 2) To exit ‘Quick Freeze’ (the followings refer to the OR relationship) Refer to ‘Single Key Operation’ The ‘Quick Freeze’ function exits automatically when the refrigerator total run time reaches 26 hours, counting from the moment the quick freeze function is enabled, with the character ‘Quick Freeze’ and its icon extinguished. When the ‘Eco’ function is enabled, the ‘Quick Freeze’ function gets exited, with its icon extinguished. 3) When the ‘Quick Freeze’ function is enabled, the freezer temperature can’t be modified. 4) When the ‘Quick Freeze’ function gets exited, the freezer temperature restores to its original temperature that is set before the ‘Quick Freeze’ function is enabled. 1.4.2 ‘Holiday’ function 1) To enter ‘Holiday’ Refer to ‘Single key operation’; 2) To exit ‘Holiday’ (the follows refer to the OR relationship)

Refer to ‘Single key operation’;

When the ‘Eco’ function is enabled, the ‘Holiday’ or ‘Fridge Off’ function gets exited. 3) When the ‘Holiday’ function is enabled, the fridge temperature is set at 14℃, which can’t be modified. 4) When the ‘Holiday’ function is exited, the fridge temperature is restored to its original value that is set before the ‘Holiday’ function is enabled. 1.4.3 ‘Eco’ function 1) To enter ‘Eco’: Refer to ‘Single key operation’; 2) To exit ‘Eco’ (the follows refer to the OR relationship): Refer to ‘Single key operation’; When the ‘Quick Freeze’ or ‘Holiday’ function is enabled, the ‘Eco’ function gets exited. When the fridge temperature or the freezer temperature is modified, the ‘Eco’ function gets exited, with the set temperature executed. 3) When the ‘Eco’ function is enabled, the fridge temperature is set at 05℃and the freezer temperature at -18℃. 4) When the ‘Eco’ function is disabled, the temperature of each compartment is restored to its original value that is set before the ‘Eco’ function is enabled. 1.4.4 ‘Fridge Off’ function 1) To enter ‘Fridge Off’: In the case of fridge temperature setup, the fridge is shut off when the ‘OK’ key is pressed after the temperature setting is adjusted to ‘OF’. 2) To exit ‘Fridge Off’ (the follows refer to the OR relationship): Refer to ‘Single key operation’; Adjust the fridge temperature to the mode other than OF, and then press the ‘OK’ to validate it. When the ‘Eco’ function or the ‘Holiday’ function is enabled, the ‘Fridge Off’ function gets exited. 1.4.5 Function program setting relationships table

1. ‘Out’: indicates that the current function will be exited. 2. ‘Or’: indicates that the current function will be disabled when the function to set is enabled. 3. ‘And’: indicates the function to set can not be enabled with the current function still running, and the two function can be executed at the same time after setting.

2.1 Display Rules 2.1.1 Characters and icons that can be displayed independently: Fridge icon, freezer icon, Pure Tech

Light and its icon, Quick Freeze and its icon, Holiday and its icon, Eco and its icon, minus sign, ℃ symbol, and two 8-bit digits.

2.1.2 The display gets all illuminated when the refrigerator is energized for the first time, which restores to the normal display2S later. 2.1.3 When the display gets illuminated,it will be off if no key operation within 3 minutes, with keys locked. 2.1.4 When the display is off, a key can be awakened when pressed for the first time, and if any key is pressed at this time, this key becomes invalid; In such case, hold down the ‘Unlock’ key for 3s to unlock the key, and then press the key to enable its function. 2.1.5 In the case of failure or any door open action, the display gets illuminated. 2.1.6 Over-temperature alarm: When energized, if the freezer sensor temperature is higher than -10℃, its corresponding icon (the upper and lower freezer doors) and set temperaturegets flickering. The temperature of the freezer when it is energized can be displayed by pressing any key. And the normal display is restored by pressing any key again. 2.1.7 Special function program display contents: Under the state that the display is on, when the ‘Pure Tech Light’ function is enabled, the character ‘’Pure Tech Light’ gets illuminated; when the ‘Quick Freeze’ function is enabled, the character ‘Quick Freeze’gets illuminated; when the ‘Holiday’ function is enabled, the character ‘’Holiday’gets illuminated; and when the ‘Eco’ function is enabled, the character ‘Eco’gets illuminated. 2.1.8 Failure indications 1) Failure information displayed for different types of failures :

Freezer evaporator sensor failure

Ambient temperature sensor failure

Communication failure Fan alarm

Information Displayed Fridge temperature display as ‘E0’ Freezer temperature display as ‘E0’ Freezer temperature display as ‘E1’ Display as ‘EH’

2) In case ‘E0’ and ‘E1’ alarm information need to be displayed at the same time, ‘E2’ is displayed.

3) Normal operation can be restored immediately after a failure is troubleshooted, without any manual intervention.

3.1 Maintenance program 3.1.1 By pressing combination keys, you can access the maintenance program (refer to the sectionKeys), with the buzzer issuing one sound first. And all

characters other than the digits that are displayed according to the rulesare hidden.

3.1.2 The parameters to be set, the load running state, or the sensor temperature value can be displayed. 3.1.3 When you press the ‘Temp.Zone’ key, parameters to be set can be selected according to the following table from left to right and from top to bottom. 3.1.4 When the ‘Temp.’ key is pressed, the running state can be adjusted.

Instant fridge temperature

Instant freezer temperature

Instant freezer evaporator temperature

CH C (compress or) CP(fridge throttle) Fd (freezer fan) Hd (defrost heater) HL(anticondensati on heater) H1 （ Pure Tech Light lamp）

Leave space around food

This allows cold air to circulate around the Fridge, ensuring all parts of the Fridge are kept cool. Wrap up food! To prevent transfer of flavors and drying out, food should be separately packed or covered. Fruit and vegetables need not be wrapped. Pre-cooked food should be cooled properly Allow pre-cooked food to cool down before placing in the Fridge. This will help to stop the internal temperature of the Fridge from rising. Shut the door! To prevent cold air escaping, try to limit the number of times you open the door. When retuning from shopping, sort foods to be kept in your Fridge before opening the door. Only open the door to put food in or take it out. Tips for shopping for frozen foods Your Freezer is 4 star When you are buying frozen food, look at the Storage Guidelines on the packaging. You will be able to store each item of frozen food for the period shown against the 4 star rating. This is usually the period stated as “Best, Before”, found on the front of the packaging.

3.1.5 After the operating parameters are set, the refrigerator runs according to the settings of maintenance program.

3.1.6 When the maintenance program is running, you can press the ‘Temp. Zone’ key to select parameters to set or view the real value of each sensor, and press the ‘Temp.’ key to change the load running parameters. 3.1.7 Exit conditions: 1) The maintenance program keeps running for maximum 3 hours, and it exits automatically when the time limit is exceeded, with the normal operation program restored. 2) The maintenance program gets exited immediately when you disconnect the refrigerator power supply and energize it again.

Tips for keeping food perfect in the

Fridge Take extra care with meat and fish Cooked meats should always be stored on a shelf above raw meats to avoid bacterial transfer. Keep raw meats on a plate which is large enough to collect juices and cover it with cling film or foil.

Check the Fridge/Freezer temperature

Check the temperature of the frozen food cabinet in the shop where you buy your frozen foods. It should show a temperature lower than -18℃. Choose packs carefully Make sure the frozen food package is in perfect condition. Purchase frozen food last Always buy frozen products last on your shopping trip or visit to the supermarket. Keep frozen foods together Try to keep frozen food together whilst shopping, and on the journey home as this will help to keep the food cooler. Store food straight away Don’t buy frozen food unless you can freeze it straight away. Special insulated bags can be bought from most supermarkets and hardware shops. These keep frozen food cold for longer. Thawing frozen food For some foods, thawing before cooking is unnecessary. Vegetables and pasta can be added directly to boiling water or steam cooked. Frozen sauces and soups can be put into a saucepan and heated gently until thawed. Freezing fresh foods, useful tips Use quality food and handle it as little as possible.

Freeze food in small quantities, it freezes faster, takes less time to thaw and enables you to eat it in the quantity you need.

vacuumed using a soft brush attachment.

Do not use harsh cleaners, scouring pads or solvents to clean any part of the Fridge/Freezer

Freezing fresh foods

First, estimate the amount of food you will be freezing. If you are freezing large amounts of fresh food, remember to turn the control dial to Max. This will lower the temperature in the Freezer (approx 30℃), freezing your food quicker and helping to keep the goodness in. However you should do this sparingly to conserve energy.

Simple fault analysis and elimination

Not every failure requires technical service personnel to solve the following simple small problem; you can try to solve the problem.

Preparations for freezing

·Leave cooked food to cool completely. ·Chill food in a Fridge before freezing if possible. ·Consider how you want to cook the food before freezing it. ·Don’t freeze food in metal containers as you may want to microwave it straight from the Freezer. ·Use special Freezer bags available from supermarkets, Freezer film, polythene bags, plastic containers, aluminum foil for acidic foods(such as citrus fruits). Do not use thin cling film or glass. Do not use used food containers (unless cleaned thoroughly first). ·Exclude as much air from the container as possible. You could buy a special vacuum pump which sucks excessive air out of the packaging. ·Leave a small amount of “air space” when freezing liquids, to allow for expansion. ·You can use the space in the Freezer most efficiently if you freeze liquids(or solids with liquids, such as stew) in square blocks. This is known as “performing” Pour the liquid into a polythene bag which is inside a square sided container. Freeze it like this, then remove it from the container and seal the bag.

This appliance is designed as automatic defrosting ,no need to defrost by hand. Recommended storage periods For recommended food storage time, refer to the information given on your food packaging. Cleaning inside the Fridge/Freezer You should clean the Fridge/Freezer internally with a weak solution of bicarbonate of soda. Then rinse with warm water using a damp sponge or cloth and wipe dry. Wash the baskets in warm soapy water and ensure they are completely dry before replacing in the Fridge/Freezer. Cleaning outside the Fridge/Freezer Use standard non-abrasive detergent diluted in warm water to clean the Fridge/Freezer exterior. The grille of the condenser at the back of the Fridge/Freezer and the adjacent components can be

Completely non refrigeration

Is power plug off? Are breakers and fuses a broken? No electricity or line trip?

Is refrigerator stable?

Does refrigerator reach the wall?

Poor refrigerating efficiency

Do you put hot food or too much food?

Do you open the door frequently? Do you clip food bag to the seal of door? Direct sunlight or near a furnace or stove? Is it wellventilated? Temperature setting in too high?

Peculiar smell in refrigerator

Do you need to clean refrigerator? Do you packed food of strong flavors?

Re-plug. Opening the door and checking whether the lamp is lit. Adjusting refrigerator’s adjustable feet. Off the wall. Putting food into refrigerator when hot food becomes cool. Checking and closing the door. Removing the refrigerator from the heat source. Emptying the distance to maintain good ventilation. Setting to the appropriate temperature. Throwing away spoiled food. Cleaning refrigerator. Packing food of strong flavors.

Moving the Fridge/Freezer

Location Do not place your Fridge/Freezer near a heat source, eg. Cooker, boiler or radiator. Also avoid direct sunlight in out-buildings or sun lounges. Leveling the Fridge/Freezer Make sure the Fridge/Freezer is level. Use the rotating leveling feet at the front. If the Fridge/Freezer is not level, the doors and magnetic seal alignments will be affected and may cause your Fridge/Freezer to work incorrectly. Do not turn on the Fridge/Freezer for 4 hours After the Fridge/Freezer is in place it needs to be left

for 4 hours. This allows time for the coolant to settle.

Installation Don’t cover or block the vents or grilles of your appliance. If you're not at home for a long time • Turn off the refrigerator first and then unplug the unit from the wall outlet. • Remove all the food. • Clean the refrigerator. • Leave the lid open slightly to avoid possible formation of condensation, mold, or odors. • Use extreme caution in the case of children. The unit should not be accessible to child’s play. • Short vacations: Leave the refrigerator operating during vacations of less than three weeks. • Long vacations: If the appliance will not be used for several months, remove all food and unplug the power cord. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door open slightly: blocking it open if necessary or have the door removed. How to save energy • Install the refrigerator in the coolest part of the room, out of direct sunlight and away from heating ducts or registers. Do not place the refrigerator next to heat-producing appliances such as a range, oven or dishwasher. • The refrigerator door should remain open only as long as necessary; do not place hot food inside the refrigerator. • Organize the refrigerator to reduce door openings .Remove as many items as needed at one time and close the door as soon as possible. • The refrigerator door should be properly closed to avoid increased energy consumption, and the formation of excess ice and / or condensation inside. • Constantly circulating cold air keeps the temperature homogenous inside the refrigerator. For this reason, it is important to properly distribute the food, to facilitate the flow of air. • Cover foods and wipe containers dry before placing them in the refrigerator. This cuts down on moisture build-up inside the unit. • Do not overcrowd the refrigerator or block cold airvents. Doing so causes the refrigerator to run longer and use more energy. Shelves should not be lined with aluminum foil, wax paper or paper toweling. Liners interfere with cold air circulation, making the refrigerator less efficient, which could cause food spoilage. • During prolonged absences (example: vacations), it is advisable to disconnect the refrigerator, remove all the food, and clean it . The door should be left slightly open to avoid mold and unpleasant odors. This will not affect the refrigerator when it is reconnected. • During short absences (example: holidays), the refrigerator can remain on. However, remember that prolonged power outages may occur while you are gone.

TROUBLE SHOOTING If the appliance does not operate when switched on, check.

Power cut: If the internal temperature of the Fridge/Freezer compartment is -18°C or less when the power returns, your food is safe. The food in your Fridge/Freezer will remain frozen for approx 16 hours with the door closed. Do not open the Fridge/Freezer door more than necessary.The product is designed and built for domestic household use only. The plug is inserted properly in the socket and that the power supply is on. (To check the power supply to the socket, plug in another appliance). The fuse has blown/circuit breaker has tripped/main distribution switch has been turned off. The temperature control has been set correctly. If the refrigerator is exceptionally cold, you may have accidentally adjusted the thermostat control dial to a higher position. If he refrigerator is exceptionally warm, the compressor may not be working. Turn the thermostat control dial to the maximum setting and wait a few minutes. If there is no humming noise, it is not working. Contact the local store where your purchase was made. If condensation appears outside of the Refrigerator, this may be due to a change in the room temperature. Wipe off any residue of moisture. If the problem continues contact the local store where your purchase was made. If he provided plug has been replaced, make sure the new plug is properly connected. If the appliance is still not operating after the above checks, please contact Customer Service.

SCRAPPING OLD APPLIANCES This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and

Electronic Equipment (WEEE). WEEE contains both polluting substances (which can cause negative consequences for the environment) and basic components (which can be re-used). It is important to have WEEE subjected to specific treatments, in order to remove and dispose properly all pollutants, and recover and recycle all materials. Individuals can play an important role in ensuring that WEEE does not become an environmental issue; it is essential to follow some basic rules: WEEE should not be treated as household waste. WEEE should be handed over to the relevant collection points managed by the municipality or by registered companies. In many countries, for large WEEE, home collection could be present. In many countries, when you buy a new appliance, the old one may be returned to the retailer who has to collect it free of charge on a one-to-one basis, as long as the equipment is of equivalent type and has the same functions as the supplied equipment.

By placing the mark on this product, we are confirming compliance to all relevant European safety, health and environmental requirements which are applicable in legislation for this product.