GS 8862 - Kitchen appliance SEVERIN - Free user manual and instructions

USER MANUAL GS 8862 SEVERIN

Exterior view of a modern white refrigerator with closed lid (no visible text or symbols)

ART.-NR. GS 8862

GB Instructions for use Cabinet freezer 13

- WARNUNG: BRANDGEFAHR!

Warning symbol of a flame inside a triangle (no text or numbers)

Technical diagram of a multi-chamber refrigerator with numbered components and internal compartments

Two vertical panels with checkmark and cross symbols, likely indicating approval or cancellation status

Aufstellmaße

Technical line drawings of a flatboard and a rectangular frame with arrows indicating upward motion (no text or symbols)

Simple line drawing of a mechanical setup with a tool and a magnified inset showing a hand holding a small object (no text or symbols)

Simple line drawing of a mechanical clamp or bracket with two pins inserted (no text or symbols)

Screw 180° →

Diagram illustrating a mechanical or electrical setup with labeled components and directional arrows indicating motion or flow.

(Unterseite Tür)

Line drawing of a tool gripping a metal object, no text or symbols present

Diagram showing transformation of a device with labeled components before and after, marked by red circles indicating specific areas.

Line drawing of a wooden table with a hand holding a small object, no text or symbols present

Simple line drawing of a screwdriver inserted into a mechanical component (no text or symbols)

Read the complete instruction manual carefully before you start to use the appliance. Keep it for further use. The appliance is only to be used by persons who are familiar with the safety instructions. If you pass it on, attach these instructions as well.

Intended Use

• The appliance is designed for storage and conservation of food only.
• We are not liable for possible defects in the case of abnormal handling or disregard of the instructions given by this manual.
• This compressor-freezer unit is designed for deep-freezing and long-term storage of deep-frozen food, as well as for making ice-cubes.
• Cooling appliances are divided into climate classifications. The climate classification for this item can be taken from the appliance specification sheet at the end of this manual.

Safety Instructions

- The appliance is designed for the use in a household or similar, for instance:

– in kitchens for employees in stores, offices and similar working environments;
-in agricultural holdings;

–for customers in hotels and motels and other living environments;

– in bed and breakfast establishments.

- The appliance is not designed for commercial use, neither for the use in catering services and similar wholesales.

• WARNING: FIRE HAZARD!

The appliance contains the eco-friendly but inflammable cooling medium

Warning symbol of a flame inside a triangle (no text or numbers)

Isobutane (R600a). Therefore, you should pay attention that the cooling system is protected during the transport and after the installation of the appliance. If the system is damaged, by no means activate the appliance. In this case, remove open fire or ignition sources from near the cooling medium and aerate the room.

- If you sell, hand over or submit your appliance for recycling, you have to refer to the inflammable propellant Cyclopentane (C5H10) in isolation as well as to the refrigerate Isobutane (R600a). Further details can be taken from the chapter Disposal.

• WARNING! Do not damage the cooling circuit. Leaking cooling medium can damage your eyes or cause inflammations.
• WARNING! Do not block the air inlets of the appliance panelling or the design with built-in furniture. A sufficient circulation of air has to be ensured.
• WARNING! Do not use any electric appliances (e.g., ice machines. etc.) that are not described in the manual.
• Before plugging it in, check for possible damage during shipping in the power cord or in the appliance itself. If this is the case, the appliance must not be put into operation.
• In this appliance, explosive substances such as an aerosol container with inflammable propellant cannot be stored.
• If reparations or interventions on the appliance are necessary, they have to be executed by an authorized repair service, in order to follow the safety regulations and to prevent endangerment. This also applies to the replacement of the power plug.
• The appliance can be used by children of 8 years or older as well as persons with reduced physical, sensory or mental abilities or lack of experi-

ence and/or knowledge, but only if they are supervised or instructed relating to the safe use of the appliance and thus understand the resulting dangers.

• Children are not allowed to play with the appliance.
- Cleaning and maintenance must not be executed by children without supervision.
- Tepid water with an addition of washing-up liquid is suitable for regular maintenance. Further details of the cleaning can be taken from the chapter Cleaning and Defrosting (Maintenance).

SEVERIN

• In order to prevent damage to persons or property, the appliance can only be transported in a box, and it requires two persons to be installed.
• Caution! Keep your children away from packaging material - choking hazard!
• Regularly check the power plug for damages. If this is the case, do not use the appliance.
• Do not use electric appliances on the storage space to prevent fire hazards. Also, do not put liquid containers on the appliance, so that possible leaking liquids do not interfere with the electronics and the isolation.
• Store high-proof alcoholic substances only tightly sealed and upright.
• Do not store glass bottles with freezable liquids or carbonated liquids in the appliance, since they could burst while freezing.
• Do not consume expired food. This could lead to food poisoning. Do not refreeze already defrosted groceries.
• Do not misuse any shelves, compartments, doors, etc., as a tread or for leaning on.
• Do not handle open fire or ignition sources in the interior space of the appliance.
• Pull the power plug:
• in case of disturbances during the operation;
  • before every cleaning;
  • while working on the appliance.
• Do not pull the power cord; always grab the power plug for this purpose. If the appliance is out of operation for a more extended period of time, then the door should stay open.
  • We reserve technical changes.

Configuration

Technical diagram of a multi-chamber refrigerator with numbered components and internal compartments

1	Appliance cover
2	Temperature control
3	Door
4	Middle drawers
5	Bottom drawer
6	Adjustable feet

Transport of the appliance

• During the transport, you have to secure all loose parts in and on the appliance, in order to prevent damage.
• The appliance should not be transported in a vertical position and at the same time not tilted over more than 30 degrees. Wait 30 minutes after the installation, before you connect the appliance to the mains.
• If the appliance was transported with a tilt of more than 30 degrees, wait 4 hours before you connect the appliance to the mains.

Before the initial operation

• Remove the protective sheets and all packaging material incl. the transport securing of the storage spaces and of the trays from the appliance.
• Dispose the packaging professionally.
• You might notice a slight ‘new smell’ when you start the appliance for the first time. It goes away once the appliance begins to cool.
• Clean the interior with tepid water with the addition of washing-up liquid. Clean the equipment separately with rinsing water, not in the dishwasher.
• Before you fill the appliance with food, let it work for 24 hour, so that the target temperature can be reached.

Installation of the appliance

• The appliance should be installed in a dry and well-aired room.
• The appliance can be operated at a humidity of max. 70 %.
• The surrounding temperature, at which the appliance can be operated, can be taken from the appliance specification sheet at the end of this manual.
• Do not install the appliance outdoors.
• Bear in mind that you can pull the power plug anytime.
• Protect the appliance from direct insolation. It should not be installed near heat sources (stove, heater, etc.). If this, however, cannot be avoided, you should put isolation between the heat source and the appliance.
• You must not imbed the appliance in a cabinet. The installation of the fridge directly under a board or a cabinet is disallowed.
• The unevenness of the floor can be compensated with the two vertically adjustable screw-in feet in the front, so that safe stability is attained.

Two vertical panels showing directional signs: a checkmark and an X, likely indicating cancellation or rejection.

Installation measures

If the appliance is placed sideways on a wall, you will leave a lateral gap of at least 60 mm, so that the doors of the appliance can open in a 90-degree angle.

W H

E D F F B C A

Width (W)	Depth (D)	Height (H)
545 mm	597 mm	1252 mm

A	B	C	E	F
925 mm	1045 mm	125°	30 mm	100 mm

Ventilation

min 10 cm min 2 cm

The air warmed behind the appliance needs to circulate freely. For this reason, the circulation of air cannot be compromised.

Caution! Do not cover possible existing ventilation openings in the back area of the top cover plate!

Connection

• Before you connect the appliance, you have to make sure that itself and the power plug do not show any transport damages.
• Connect the appliance only to a shockproof outlet. The mains voltage has to correspond to the one stated on the tool identification plate.
• The appliance complies with the guidelines that are obligatory for CE marking.
• Do not connect the appliance to an inverter
• The power plug should not touch the backside, in order to avoid possible vibration noise.
• The appliance can be put into operation by plugging the mains plug into the point.
• A complete switching-off only occurs by pulling the mains plug.
• If the appliance has been disconnected from the mains, wait approx. 5 minutes after plugging in the mains plug before setting the temperature controller to the desired position.

Operating elements

The temperature adjustment is set via the controller inside the appliance.

1 2 0 4 3

Place it in a central position (2 - 3) to set an optimal temperature for normal use. The more you turn the knob clockwise (3 - 4) with the help of a token/coin, the lower the temperature in the appliance will be. The more you turn the knob counterclockwise (1 - 2), the higher the temperature in the appliance will be. Make sure the desired temperature has been reached by using a thermometer. The "O" position means the device is switched off.

Freezer Door

The freezer door should always stay closed so that the food does not defrost. Thereby, the formation of ice and frost accretion is reduced. Therefore, make sure that the door is only open for withdrawal of food or rather for filling the freezer.

Freezing/Storing of Food

• The appliance is designed for the freezing of food, for the long-term storage of frozen food as well as for the appliance ion of ice cubes.
• Fresh food should be frozen to the core as quickly as possible, so that the nutritional value, the vitamins, etc. do not get lost. For this reason, put the food in one or two rows in the freezer.
• Do not bring them into contact with already frozen food.
• Do not exceed the freezing capacity per day! The respective value for the maximum freezing capacity can be taken from the appliance specification sheet at the end of the manual.
• The freezing time shortens if the food to be frozen is divided into small portions.
• Store the frozen food in the appliance only packaged. You can use uncoloured plastic sheets/bags or aluminium foil as packaging material. Remove the air from the packaging before freezing and check for airtightness. Provide every packaging with a label with the content, date of freezing and date of expiry on it.
• Do not freeze carbonated liquids, warm foods or liquids in a glass container or bottle.
• Defrost frozen appliances in a refrigerator. Foods keep their taste when they are defrosted slowly, and the emitted cooling energy from these appliances can be used to maintain the intended temperature in the refrigerator.

- If the appliance is turned off for a longer period of time, e.g., because of a mains failure, leave the door closed. Thereby, a more significant loss of cooling energy can be avoided. The maximum storage time during malfunction can be taken from the appliance specification sheet at the end of the manual. Because of the higher interior temperature, the storage time for food is shortened.

Data for expiry dates of frozen food are indicated in the chart per month.

2·6	4·8	8·12

Do not store the frozen food longer than the given time in the freezer. Pay attention to the expiry date of the frozen food indicated by producer.

Making ice cubes

A special ice-cube tray is provided for making ice cubes. Fill the tray up to 34 with drinking water and place it in the freezer compartment for a few hours. The ice cubes are easier to remove from the tray if the tray is left standing at room temperature for 5 minutes.

Cleaning and Defrosting (Maintenance)

Cleaning

• Always pull the mains plug before cleaning.
- Do not pour water into the appliance.
- Tepid water with a bit of washing-up liquid is suitable for the regular maintenance.
- Clean the equipment separately with rinsing water, not in the dishwasher.
- Do not use aggressive, abrasive or alcoholic detergents.
- After cleaning it with clear water, wipe the surface and carefully dry it off. Subsequently, plug the mains plug with dry hands.
- In order to save energy and maintain the efficiency, you should clean the condenser (on the backside) and the compressor at least twice a year with a broom or vacuum cleaner.
- The rating label in the interior of the appliance cannot be damaged or even removed while cleaning.

Defrosting

If the ice layer in the interior is 2-4 mm thick, the appliance must be defrosted. Clean it at least twice a year.

• Disconnect the mains plug from the socket.
• Remove food from the appliance and store it as cool as possible, e.g., together with ice packs and covered in a plastic recipient. Please remember that the lifetime of the goods is shortened by the temperature increase and that they should be consumed as quickly as possible.

- Leave the door open. To speed up defrosting, place one or more pots with hot but not boiling water in the freezer.

- Warning! Do not use other mechanical devices or any other means, e.g., heating appliances, to speed up defrosting.

- Dry the appliance thoroughly after cleaning.

- Plug in the mains plug. Wait approx. 5 minutes and set the temperature controller to the desired position.

Tips for Energy Saving

• For the installation of the appliance, choose a cool, dry and well-aired room.
• Protect the appliance from direct insolation. It should not be installed near heat sources (stove, heater etc.). If this cannot be avoided, some sort of isolation between heat source and appliance has to be used.
• Don't cover the ventilation openings and grid. Provide enough circulation of air on the backside of the appliance.
• Let warm food cool down before you store it in the fridge.
• Do not leave the door open too long when withdrawing or putting food inside. Otherwise, the formation of ice in the interior will be accelerated.
• Do not set the temperature lower than necessary. More details on temperature settings can be taken from the chapter ‘Operating elements’.

Operation Noises

There might be some typical operation noises when the appliance is turned on. These are:

• Noise of the electric motor is arising from the working compressor. When the compressor starts to operate, then the noises get slightly louder for a short time.

- Noises in the tubes of the circulation of the refrigerant.

ok Blubb ... Blubb ... Brrr ... Brrr ...

Change the Door Stop

• If necessary, the door can be changed from right-to left-hinged.
• Warning! Before you work on the appliance, always pull the mains plug out of the point.
• In order to avoid damages to persons and property, execute the change of the door stop with two persons.
• We recommend leaving the change of the door stop to experts.
• Before you start with the modifications, here is some general info:

- Always pay attention to the number of shims on the bearing pins and screws.

- Position the doors always so that they close tightly.

1. Remove the screw covers on the lid of the appliance. Loosen the screws and remove the lid from the appliance.

Technical line drawing of a flatboard and a rectangular frame with an upward arrow indicating rotation (no text or symbols)

1. Remove the hinge cover from the lid of the appliance. Depending on the model, insert the separately enclosed or the freshly removed hinge cover on the opposite side.

Diagram of a mechanical setup with a tool and a magnified inset showing a hand holding a component (no text or symbols)

1. Loosen the screws from the hinge and remove it. Lightly lift the door and remove it.

Simple line drawing of a mechanical clamp or bracket with two pins inserted (no text or symbols)

1. Unscrew the bolt from the upper left side of the appliance and screw it on the opposite side.
2. Loosen the bolt from the hinge using a screwdriver. Turn the hinge around and replace the bolt. Set this hinge aside. You will not need it again before step 11.

Screw 180°

1. Disconnect the door bushing from the top of the door and the hinge shroud from the bottom of the door. Replace each on the other side and tighten the hinge shroud.

Diagram showing a mechanical or electrical component with labeled parts and directional arrows indicating motion or movement.

(Lower part of the door)

1. Remove the adjustable feet of the appliance. Loosen the screws on the lower hinge and remove it.

Technical line drawing of a mechanical clamp or tool interacting with a surface (no text or symbols)

1. Loosen the screw on the left side of the appliance and replace it on the other side.
2. Loosen the screw on the lower hinge and replace it on the other side.

Diagram showing transformation of a device component with highlighted parts, likely illustrating a process or labeling.

Screw the hinge on the left side of the appliance. Attach the feet back again.

1. Remove the hinge cover from the upper right inside of the door and fix it onto the left side.

Line drawing of a wooden table with a hand holding a small object, no text or symbols present

1. Place the door onto the lower hinge and place the hinge pin of the hinge onto the door. Attach the hinge tight onto the appliance.

Simple line drawing of a screwdriver inserted into a mechanical component (no text or symbols)

1. Replace the lid of the appliance, screw it tight and replace the screw covers.
2. Finally, check the correct alignment of the door. Make sure it is tightly sealed on all sides. If necessary, align the front feet of the appliance, so they are in a horizontal position. If the appliance has been tilted more than 30^ , wait 4 hours before connecting it to the mains.

Disposal

Appliances that are marked with this symbol have to be disposed of separately from household rubbish. These appliances contain valuable resources that can be recycled. A correct waste disposal protects the environment and the health

of those around you. To get informed about it, either defer to your municipal administration or the retailer.

• Pull the mains plug out of the socket and disconnect it from the appliance before getting rid of it.
• The cooling medium Isobutane (R600a) and the propellant in the isolation Cyclopentane (C5H10) are inflammable substances, thus, need to be appropriately disposed of.
• Make sure the tubes of the cooling circuit don't get damaged before the proper disposal.

Warranty

Severin grants you a manufacturer's warranty of two years starting from the date of purchase. During this period, we eliminate all defects which are noticeably based on material or fabrication defects and substantially affect the function, free of charge. Further claims are excluded. The following is excluded from the warranty: Damages that result from non-observance of the instruction manual, improper use or normal abrasion, also delicate parts, e.g., glass, plastic or light bulbs. The warranty expires in the case of an intervention that is not authorized by us. If a repair is necessary, call and write an e-mail to our after-sales service. The contact details can be taken from the appendix of the manual. The legal warranty laws against the vendor and possible vendor warranties stay untouched.

Details for After-Sales Service

If a repair is necessary, please contact the service hotline directly with an explanation of the defect. Before you do that, write down the article number from the rating label on the appliance (see figure), since this is needed for the smooth processing of your request.

Subsequently, there is a table with possible malfunctions and recovery methods. Check if the recovery methods can repair the malfunctions. If this is not the case, then the appliance has to be disconnected from the mains supply, and the after-sales service has to be contacted.

Fault	Possible reason and rectification
The appliance is not working.	Power cut.The main fuse has dropped out.The fuse in the wall socket is not working. Check this by plugging another appliance into the same point.
The noises are too loud (if the normal operation noises change).	Does the device have a solid stand?Does the running cooling unit set adjoining furniture or objects into vibration?Do objects positioned on the top of the appliance vibrate?

Appliance Specification Sheet* Cooling Appliances

Item no.	GS 8862
Category-Household Cooling Device	8 – Cabinet freezer
Energy efficiency classification	A++
Energy consumption** in kWh/Year	168
Useful capacity in the cooling part in litre	-
Useful capacity ✗*** - in the freezer part in litre	140
Frost-protected: Freezer compartment	No
Frost-protected: Refrigerator compartment	-
Storage time in case of disturbances in hours	21
Freezing capacity in kg / 24 h	10
Climate	N-T
Surrounding temperature range in °C	16 – 43
Noise emission in dB(a)	40
Measurements H × W × D in cm	1252 × 545 × 597
Weight in kg	40,5
Electric data	see rating plate

*) According to ordinance (EU) Nr. 1060/2010 Appendix III
**) The actual consumption depends on the use and the location of the appliance.

SEVERIN

Warning symbol of a flame inside a triangle (no text or numbers)

Technical diagram of a multi-chamber refrigerator with numbered components and internal compartments

Two vertical panels with check and cross symbols, likely indicating approval or rejection status

ok blubb... glubb... Brrr... Brrr...

Technical line drawing showing two views of a mechanical component with a tool inserted (no text or symbols)

Diagram of a mechanical setup with a tool and a magnified inset showing a hand holding a component (no text or symbols)

Simple line drawing of a mechanical clamp or bracket with two pins inserted (no text or symbols)

SEVERIN

Screw 180°

Diagram showing a mechanical or electrical component with labeled parts and directional arrows indicating motion or rotation.

Technical line drawing of a mechanical clamp or tool securing a fin with a triangular base (no text or symbols)

Diagram showing transformation of a device with labeled components before and after, marked by red circles indicating specific areas.

Line drawing of a mechanical component with a hand holding a tool, no text or symbols present

Simple line drawing of a screwdriver inserted into a mechanical component (no text or symbols)

WAARSCHUWING: BRANDGGEVAAR!

Warning symbol of a flame inside a triangle (no text or numbers)

Technical diagram of a multi-chamber refrigerator with numbered components and internal compartments

Two vertical panels with checkmarks and an 'X' symbol, no text or labels present

ok blubb... glubb... Brrr... Brrr...

Line drawings of two different views of a table or stand, showing top and side views with arrows indicating direction (no text or symbols)

Diagram of a mechanical setup with a tool and a magnified inset showing a hand holding a component (no text or symbols)

SEVERIN

Simple line drawing of a mechanical clamp or bracket with two pins inserted (no text or symbols)

Screw 180°

Diagram showing a mechanical or electrical component with labeled parts and directional arrows indicating motion or assembly.

(Onderste deur)

Technical line drawing of a mechanical clamp or tool operating a cutting edge (no text or symbols present)

Diagram showing transformation of a device component with circular holes and red-circled features, likely illustrating a process or labeling.

Line drawing of a wooden bracket with a hand holding a small object, no text or symbols present

Simple line drawing of a screwdriver inserted into a mechanical component (no text or symbols)