49UM7390 - Téléviseur LG - Free user manual and instructions
Find the device manual for free 49UM7390 LG in PDF.
Download the instructions for your Téléviseur in PDF format for free! Find your manual 49UM7390 - LG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 49UM7390 by LG.
USER MANUAL 49UM7390 LG
100,0 mm x 55,0 mm x 5,0 mm
Le nom du modèle et le numéro de série sont indiqués à l'arrière et sur le côté du produit. Inscrivez-les ci-dessous pour référence ultérieure. Modèle Nº de série
SMART TV Quick Setup Guide * Image shown may differ from your TV. * Image shown on a PC or mobile phone may vary depending on the OS(Operating System). * App icon positions may vary on the platform, depending on the software version.
Network Settings 1 Press the (Settings) on the remote to access the settings menu. Point the ( ) [All Settings] icon and select by pressing the Wheel (OK) button on the remote.
4 If the connection is successful, the "[Connected to Internet]" is displayed. Picture
Wired Connection (Ethernet) Not Connected
Wi-Fi Connection Connected to Internet
Device Connector Mobile TV on
2 Select the [Connection] → [Wired Connection(Ethernet)] or [Wi-Fi Connection]. Picture Sound Programmes
Wired Connection (Ethernet)
Wi-Fi Connection Connection
Device Connector Mobile TV on
WI-FI CONNECTION Connection /
HDMI Device Settings
You can check the status of connection in [Advanced Wi-Fi settings].
CONNECTION Not Connected
Connect via WPS PBC Screen Share Settings Safety
HDMI Device Settings
Connect via WPS PIN Advanced Wi-Fi Settings
Accessibility Accessibility
3 The device automatically tries to connect to the network available (wired network first). When you select the [Wi-Fi Connection], the network list available is displayed. Choose the network you wish to use. Picture
WI-FI CONNECTION Connection /
Sound Programmes Connection General
Add a Hidden Wireless Network
Connect via WPS PBC Safety
Connect via WPS PIN Advanced Wi-Fi Settings
For wireless AP (Router) that have the you need to enter the security key.
Troubleshooting Network Problems 1 Press the (Settings) on the remote to access the settings menu. Point the ( ) [All Settings] icon and select by pressing the Wheel (OK) button on the remote.
Check the AP (Router) or consult your Internet service provider.
When X appears next to Gateway:
1 Unplug the power cord of the AP (Router) and try to connect after 5 seconds.
2 Initialize (Reset) the AP (Router).
2 Select the [Connection] → [Wired Connection (Ethernet)] or [Wi-Fi Connection] → [Advanced Wi-Fi Settings]. Picture
3 Contact internet service provider or AP (Router) company.
WI-FI CONNECTION Connection /
Wired Connection (Ethernet) Not Connected
When X appears next to DNS:
Connect via WPS PBC Safety
Screen Share Settings
Connect via WPS PIN Advanced Wi-Fi Settings
Add a Hidden Wireless Network
Follow the instructions below that correlate to your network status. Check the TV or the AP (Router).
1 Unplug the power cord of the AP (Router) and try to connect after 5 seconds. 2 Initialize (Reset) the AP (Router). 3 Check that the MAC address of the TV/AP (Router) is registered with your Internet service provider. (The MAC address displayed on the right pane of the network status window should be registered with your Internet service provider.) 4 Check the AP (Router) manufacturer’s website to make sure your router has the latest firmware version installed.
When X appears next to TV: 1 Check the connection status of the TV, AP (Router). 2 Power off and power on the TV, AP (Router). 3 If you are using a static IP, enter the IP directly. 4 Contact internet service provider or AP (Router) company.
SmartShare Connection to Smartphone 1 Check that Wi-Fi is enabled on your smartphone. To use SmartShare, both devices must on the same local network. 2 Install/run the app for sharing content on your smartphone (It's called LG TV Plus on LG phones). 3 Enable your smartphone to share content files with other devices. 4 Select the file type you want to play (movie, audio or photo). 5 Select a movie, music or photo file to play on the TV. 6 Play the media file to view and enjoy it on your TV.
Updating the TV Firmware * If the TV is turned on for the first time after it was shipped from the factory, initialization of the TV may take a few minutes. 1
[General] → [About This TV] → [CHECK FOR UPDATES]
2 After checking the version of the software, update it. If you check the "[Allow Automatic Updates]", you can update the software automatically. Picture Sound Programmes
GENERAL AI Service General Safety Accessibility
Location Timers Account Management Eco Mode About This TV Additional Settings
Safety Accessibility
User Guide Quick Help
Please call LG Customer Service if you experience any problems.
ManualGo.com