ECOSYS P3060DN - Monochrome laser printer KYOCERA - Free user manual and instructions

Product type	Monochrome laser printer
Brand	Kyocera
Model	ECOSYS P3060DN
Print speed	Up to 60 ppm (A4)
Resolution	1200 x 1200 dpi
Standard paper capacity	Tray 1: 500 sheets, MF tray: 100 sheets
Duplex printing	Automatic (built-in)
Connectivity	Ethernet 10/100/1000, USB 2.0, optional Wi-Fi
Page description languages	PCL 6, KPDL (PostScript 3), XPS
Memory	512 MB (expandable up to 2.5 GB)
Processor	PowerPC 750CXr 800 MHz
Display	Backlit LCD 5 lines
Weight	Approx. 21 kg
Dimensions (W x D x H)	404 x 430 x 370 mm
Power consumption	Printing: 615 W, Standby: 49 W, Energy-saving: 0.9 W
Operating temperature	10 to 32.5 °C
Operating humidity	15 to 80% RH
Noise level	Printing: 52 dB(A), Standby: 30 dB(A)
Toner capacity	Black cartridge: 30,000 pages (average yield)
Waste toner bottle	Capacity: 30,000 pages
Maintenance	Replace toner cartridge and waste toner bottle, regular cleaning
Safety	Class 1 laser, auto-off, network security (SSL, IPSec)
Available spare parts	Original toner cartridges, waste toner bottle, network interface kits, memory modules
Warranty	1 year (parts and labor)

Frequently Asked Questions - ECOSYS P3060DN KYOCERA

How to install the toner cartridge on the ECOSYS P3060DN?

Open the top cover, remove the used cartridge, insert the new cartridge by sliding it until it clicks, then close the cover. Refer to chapter 7 of the manual for more details.

How to clear a paper jam?

Identify the jam location (MF tray, cassette, interior, or duplex unit). Open the relevant covers, gently remove the jammed paper following instructions in chapter 8. Refer to the diagrams in the manual.

How to connect the printer to Wi-Fi?

The ECOSYS P3060DN requires an optional wireless network interface kit (IB-36 or IB-51). Once installed, configure Wi-Fi from the control panel via Network > Wi-Fi Settings, or use the Wi-Fi Configuration Tool on the provided DVD. See section 2 of the manual.

How to print automatic duplex?

In the printer driver settings, select the 'Duplex' or 'Two-sided' option. The printer has a built-in duplex unit. Make sure the paper type supports duplex printing (avoid envelopes).

How to change the display language?

Press the Menu key, use the arrows to select 'Paper Setup' or 'Adjust/Maint.', then 'Language'. Choose the desired language (French, English, etc.) and confirm with OK.

What to do if the Attention indicator is lit?

The Attention indicator indicates an error. Check the message on the display. Common causes include: paper jam, open cover, empty toner, full waste toner bottle. Refer to the 'Error Messages' section (chapter 8) for corrective actions.

How to reduce the printer's power consumption?

The printer automatically enters standby mode after 1 minute of inactivity. You can adjust the standby delay in the 'Adjust/Maint.' menu > 'Timer Settings' > 'Standby Timer'. Enable Energy-Saving mode for minimal consumption.

What paper types are recommended?

Use paper from 64 to 120 g/m² for the standard tray and MF tray. For envelopes, labels, and transparencies, use the MF tray exclusively. Certified recycled papers EN 12281 are compatible. See the 'Paper' appendix.

How to reset network settings to default?

Go to the 'Network' menu > 'Reset Network'. Confirm with Yes. This restarts the network card and restores default IP settings (DHCP enabled). For a full reset, use 'Adjust/Maint.' > 'Reset'.

Can I print from a smartphone or tablet?

Yes, via Wi-Fi Direct (with optional kit) or AirPrint (iOS compatible). Configure Wi-Fi Direct on the printer, connect your device to the 'Direct-KM...' network and print. Also supports Google Cloud Print.

USER MANUAL ECOSYS P3060DN KYOCERA

Exterior view of a Kyocera ECOSYS P3060dn printer (no visible text or symbols on body)

Préface

Configuration Wi-Fi Direct 2-13

Command Center RX 2-30

Copyright © 1998-2006 OpenSSL Project. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1 Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2 Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3 All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)
4 The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact [e-mail].
5 Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project.
6 Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)"

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Original SSLeay License

Copyright © 1995-1998 Eric Young ([e-mail]) All rights reserved.

This package is an SSL implementation written by Eric Young ([e-mail]). The implementation was written so as to conform with Netscapes SSL.

This library is free for commercial and non-commercial use as long as the following conditions are adhered to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, Ihash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson ([e-mail]).

Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed.

If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used.

This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1 Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.

2 Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

3 All advertising materials mentioning features or use of this software must display the following acknowledgement: "This product includes cryptographic software written by Eric Young ([e-mail])"

The word 'cryptographic' can be left out if the rouines from the library being used are not cryptographic related :-).

4 If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement:

"This product includes software written by Tim Hudson ([e-mail])"

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The licence and distribution terms for any publicly available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.]

Monotype Imaging License Agreement

1 Software shall mean the digitally encoded, machine readable, scalable outline data as encoded in a special format as well as the UFST Software.
2 You agree to accept a non-exclusive license to use the Software to reproduce and display weights, styles and versions of letters, numerals, characters and symbols (Typefaces) solely for your own customary business or personal purposes at the address stated on the registration card you return to Monotype Imaging. Under the terms of this License Agreement, you have the right to use the Fonts on up to three printers. If you need to have access to the fonts on more than three printers, you need to acquire a multi-user license agreement which can be obtained from Monotype Imaging. Monotype Imaging retains all rights, title and interest to the Software and Typefaces and no rights are granted to you other than a License to use the Software on the terms expressly set forth in this Agreement.
3 To protect proprietary rights of Monotype Imaging, you agree to maintain the Software and other proprietary information concerning the Typefaces in strict confidence and to establish reasonable procedures regulating access to and use of the Software and Typefaces.
4 You agree not to duplicate or copy the Software or Typefaces, except that you may make one backup copy. You agree that any such copy shall contain the same proprietary notices as those appearing on the original.
5 This License shall continue until the last use of the Software and Typefaces, unless sooner terminated. This License may be terminated by Monotype Imaging if you fail to comply with the terms of this License and such failure is not remedied within thirty (30) days after notice from Monotype Imaging. When this License expires or is terminated, you shall either return to Monotype Imaging or destroy all copies of the Software and Typefaces and documentation as requested.
6 You agree that you will not modify, alter, disassemble, decrypt, reverse engineer or decompile the Software.
7 Monotype Imaging warrants that for ninety (90) days after delivery, the Software will perform in accordance with Monotype Imaging-published specifications, and the diskette will be free from defects in material and workmanship. Monotype Imaging does not warrant that the Software is free from all bugs, errors and omissions.
The parties agree that all other warranties, expressed or implied, including warranties of fitness for a particular purpose and merchantability, are excluded.
8 Your exclusive remedy and the sole liability of Monotype Imaging in connection with the Software and Typefaces is repair or replacement of defective parts, upon their return to Monotype Imaging.
In no event will Monotype Imaging be liable for lost profits, lost data, or any other incidental or consequential damages, or any damages caused by abuse or misapplication of the Software and Typefaces.
9 Massachusetts U.S.A. law governs this Agreement.
10 You shall not sublicense, sell, lease, or otherwise transfer the Software and/or Typefaces without the prior written consent of Monotype Imaging.
11 Use, duplication or disclosure by the Government is subject to restrictions as set forth in the Rights in Technical Data and Computer Software clause at FAR 252-227-7013, subdivision (b)(3)(ii) or subparagraph (c)(1)(ii), as appropriate. Further use, duplication or disclosure is subject to restrictions applicable to restricted rights software as set forth in FAR 52.227-19 (c)(2).
12 You acknowledge that you have read this Agreement, understand it, and agree to be bound by its terms and conditions. Neither party shall be bound by any statement or representation not contained in this Agreement. No change in this Agreement is effective unless written and signed by properly authorized representatives of each party. By opening this diskette package, you agree to accept the terms and conditions of this Agreement.

Energy Star (ENERGY STAR®)

Wireless Connection (Mexico only)

The operation of this equipment is subject to the following two conditions:

1. Safety of laser beam

This machine has been certified by the manufacturer to Class 1 level under the radiation performance standards established by the U.S.DHHS (Department of Health and Human Services) in 1968. This indicates that the product is safe to use during normal operation and maintenance. The laser optical system, enclosed in a protective housing and sealed within the external covers, never permits the laser beam to escape.

2. The CDRH Act

A laser-product-related act was implemented on Aug. 2, 1976, by the Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration (FDA). This act prohibits the sale of laser products in the U.S. without certification, and applies to laser products manufactured after Aug. 1, 1976. The label shown below indicates compliance with the CDRH regulations and must be attached to laser products marketed in the United States. On this machine, the label is on the inside of the top cover.

3. Maintenance

For safety of the service personnel, follow the maintenance instructions in the other section of this manual.

4. Safety switch

The power to the laser unit is cut off when the top cover is opened.

Safety Instructions Regarding the Disconnection of Power (USA)

Caution: The power plug is the main isolation device! Other switches on the equipment are only functional switches and are not suitable for isolating the equipment from the power source.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• The use of a non-shielded interface cable with the referenced device is prohibited.

CAUTION — The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules.

Operation is subject to the following two conditions; (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

* The above warning is valid only in the United States of America.

Other precautions (for users in California, the United States)

Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.

CLASS 1 LASER PRODUCT

KLASSE 1 LASER PRODUKT

Illustration of a hand holding a CD on a laptop screen (no text or symbols present)

Illustration of a hand holding a CD next to a laptop displaying a simple diagram (no text or symbols present)

Illustration of a hand holding a CD on a laptop screen, with no visible text or symbols.

Illustration of a hand holding a CD to open a laptop screen (no text or symbols present)

Illustration of a hand holding a CD to open a laptop screen (no text or symbols present)

Illustration showing two hand gestures: one pointing at a stack of papers, the other holding a closed book with arrows indicating motion (no text or symbols)

Technical line drawing of a printer or printer with an inset showing a printer's view and a warning symbol (no text or labels present)

Line drawing of a printer with an arrow pointing to the front panel (no text or symbols present)

Illustration showing two hand-drawn steps of handling a stack of papers, with arrows indicating motion (no text or symbols present)

Line drawing of a printer's internal structure showing paper feed, paper tray, and control panel (no text or symbols)

Illustration of two hands holding a device with a vertical panel and an upward arrow, no text or symbols present

Line drawing of a printer with a paper airplane being inserted, showing internal components and a hand holding the blade (no text or symbols)

Simple geometric diagram with four directional arrows inside a rounded rectangle (no text or symbols)

Two identical rectangular shapes with vertical lines above each, no text or symbols present.

Envelop. Monarch
Envelope #10
Envelope DL
Envelope C5
Executive
Letter
A4
B5
A5-R 

A6
B6
Enveloppe #9
Enveloppe #6
ISO B5
Perso
Hagaki Oufuku
Hagaki 16K
Statement
Youkei 2
Youkei 4 

PCL6
IBM Proprinter
EPSON LQ-850
Line Printer
KPDL
KPDL (Auto) 

Orientation Portrait

Orientation Paysage

Configurer Wi-Fi Direct.

Wi-Fi Direct (activer/désactiver Wi-Fi Direct)

Wi-Fi (activer/désactiver le Wi-Fi)

Ouvert
WPA2/WPA-PSK
WPA2-PSK
WPA2/WPA-EAP
WPA2-EAP 

TCP/IP (Activer/désactiver TCP/IP)

TCP/IP (Activer/désactiver TCP/IP)

TCP/IP (Activer/désactiver TCP/IP)

AppleTalk (Paramètres AppleTalk)

Mechanical assembly diagram showing a device with an arrow indicating motion or force (no text or symbols present)

graph TD
    A["Raw Material Inspection"] --> B{Packaging}
    B --> C["Product"]
    C --> D["Final Packaging"]

Technical illustration of an open industrial machine with a black arrow indicating a component (no text or symbols present)

Line drawing of a printer with a black arrow indicating the paper direction (no text or symbols present)

Line drawing of a printer with front panel and internal components (no text or symbols)

Technical line drawing of an open industrial machine with internal components (no text or symbols)

Technical line drawing of a printer with two red-circled ports indicating internal components (no text or symbols present)

Line drawing of a printer with a red circle highlighting the internal structure (no text or symbols present)

Pure technical line drawing of a mechanical assembly without any text, numbers, or symbols

Line drawing of a printer with an open paper feeding into a slot (no text or symbols)

Line drawing of a printer with an open lid and internal structure, showing no text or symbols.

Technical line drawing of a printer or printer with an open lid and internal structure, showing no text or symbols.

Line drawing of a printer with an arrow pointing to the front panel (no text or symbols present)

Technical illustration of a printer holder and its internal structure, showing assembly and mounting (no text or symbols)

Diagram showing a device interior with internal components and a downward arrow indicating a process (no text or symbols present)

Diagram of a printer internal structure showing internal components and a black arrow indicating a component (no text or symbols present)

Line drawing of a printer with an arrow pointing to the base (no text or symbols present)

Technical illustration of a printer internal structure with an inset magnified view showing internal components (no text or symbols)

Technical line drawing of an open industrial machine with internal components (no text or symbols)

Line drawing of a printer with an open circuit board and a hand inserting a cable (no text or symbols)

Diagram showing two views of a printer's internal structure with cable routing (no text or symbols)

Line drawing of a printer with cable inserted, showing internal components and a black arrow indicating a location (no text or symbols present)

Illustration of a printer being inserted into a paper airplane, showing mechanical components and a hand inserting a paper airplane (no text or symbols present)

Illustration of a hand inserting a component into a computer case (no text or symbols visible)

Illustration of a printer being inserted into a rack, showing mechanical components and a hand interacting with it (no text or symbols present)

Line drawing of a mechanical device with an open lid and internal components, showing no text or symbols.

Technical illustration of a printer's internal structure and external assembly (no text or symbols)

Diagram showing a device interior with internal components and directional arrows indicating movement (no text or symbols present)

Technical line drawing of a mechanical device with no visible text or symbols

Wireless LAN Interface Kit (IB-51)

Wireless LAN Interface Kit (IB-36)

Technical line drawing showing a device with an attached component and its side view (no text or symbols)

Technical line drawing of a wooden frame component with internal structure and mounting bracket (no text or symbols)

Technical line drawing of a printer's front panel with internal components and mounting bracket (no text or symbols)

Data Security Kit (E)

Card Authentication Kit (B)

Diagram of a printer with an arrow pointing to the paper area, no text or symbols present

Diagram of a printer or printer mechanism with an upward arrow indicating motion (no text or symbols present)

DHCP (Dynamic Host Configuration Protocol)

NetBEUI (NetBIOS Extended User Interface)

SSD (Solid State Drive)

Mémoire USB ...... A-8

Imprimer 4-23

Retirer 4-32

Card authentication kit A-5

Carte mémoire SD/SDHC A-7

Expansion memory module ..... A-5

Faceup output tray A-5

Network interface kit A-5

Paper feeder A-5

Parallel interface kit A-5

SD card A-5

SSD A-5

USB flash memory A-5

Wireless network interface kit A-5

Option ThinPrint A-10

Orientation 4-63

P

Page d'état 4-13

Mess.conf.papier 4-48

Type de support ..... 4-35, 4-41, 4-42, 4-43

Enhanced WSD(SSL) 4-86

EnhancedWSD 4-86

FTP (Serveur) 4-86

HTPPS 4-86

HTTP 4-86

Impression WSD 4-86

IPP 4-86

IPP Over SSL 4-86

IPSec 4-86

LDAP 4-86

LPD 4-86

NetBEUI 4-86

Nom d'hôte 4-68

Paramètres Wi-Fi Direct 4-68

POP3 4-86

Port Raw 4-86

SMTP 4-86

SNMP 4-86

SNMPv3 4-86

ThinPrint 4-86

Wireless Connection ....-xii

QUALITY CERTIFICATE

This machine has passed all quality controls and final inspection

KYOCERA Document Solutions America, Inc.

Headquarters

225 Sand Road,

Fairfield, New Jersey 07004-0008, USA

Phone: [phone]

Fax: [phone]

Latin America

8240 NW 52nd Terrace Dawson Building, Suite 100

Miami, Florida 33166, USA

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Canada, Ltd.

6120 Kestrel Rd., Mississauga, ON L5T 1S8, Canada

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions

Mexico, S.A. de C.V.

Calle Arquimedes No. 130, 4 Piso, Colonia Polanco

Chapultepec, Delegacion Miguel Hidalgo,

KYOCERA Document Solutions Brazil, Ltda.

Alameda África, 545, Pólo Empresarial Consbrás, Tamboré, Santana de Parnaíba, State of São Paulo, CEP 06543-306, Brazil

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Chile SpA

Jose Ananias 505, Macul. Santiago, Chile

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions

Australia Pty. Ltd.

Level 3, 6-10 Talavera Road North Ryde N.S.W, 2113, Australia

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions

New Zealand Ltd.

Ground Floor, 19 Byron Avenue, Takapuna, Auckland, New Zealand

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Asia Limited

Unit 3 & 5, 16/F., Mita Centre, 552-566, Castle Peak Road

Tsuen Wan, New Territories, Hong Kong

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions

(China) Corporation

8F, No. 288 Nanjing Road West, Huangpu District,

Shanghai,200003, China

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions

(Thailand) Corp., Ltd.

335 Ratchadapisek Road, Wongsawang, Bangsue, Bangkok 10800, Thailand

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions

Singapore Pte. Ltd.

12 Tai Seng Street #04-01A,

Luxasia Building, Singapore 534118

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions

Hong Kong Limited

Unit 1,2,4,6,8 & 10, 16/F., Mita Centre, 552-566, Castle

Peak Road Tsuen Wan, New Territories, Hong Kong

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions

Taiwan Corporation

6F., No.37, Sec. 3, Minquan E. Rd.,

Zhongshan Dist., Taipei 104, Taiwan R.O.C.

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Korea Co., Ltd.

3F Daewoo Foundation Bldg 18, Toegye-ro, Jung-gu, Seoul, Korea

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions

India Private Limited

Second Floor, Centrum Plaza, Golf Course Road,

Sector-53, Gurgaon, Haryana 122002, India

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Europe B.V.

KYOCERA Document Solutions (U.K.) Limited

Eldon Court, 75-77 London Road,

Reading, Berkshire RG1 5BS,

United Kingdom

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Italia S.p.A.

Via Monfalcone 15, 20132, Milano, Italy,

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Belgium N.V.

Sint-Martinusweg 199-201 1930 Zaventem,

Belgium

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions France S.A.S.

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Espana, S.A.

KYOCERA Document Solutions South Africa (Pty) Ltd.

KYOCERA House, Hertford Office Park,

90 Bekker Road (Cnr. Allandale), Midrand, South Africa

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Russia LLC.

Building 2, 51/4, Schepkina St., 129110, Moscow, Russia

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Middle East

Dubai Internet City, Bldg. 17,

Office 157 P.O. Box 500817, Dubai,

United Arab Emirates

Phone: [phone]

KYOCERA Document Solutions Inc.

2-28, 1-chome, Tamatsukuri, Chuo-ku

Osaka 540-8585, Japan

Phone: [phone]

http://www.kyoceradocumentsolutions.com