28016 - UNOLD - Free user manual and instructions

Find the device manual for free 28016 UNOLD in PDF.

Page 11
Manual assistant
Powered by ChatGPT
Waiting for your message
Product information

Brand : UNOLD

Model : 28016

Download the instructions for your in PDF format for free! Find your manual 28016 - UNOLD and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 28016 by UNOLD.

USER MANUAL 28016 UNOLD

Toaster Big Toaster Duplex Multi 3 in 1

Button STD HOURS Bouton

HEURES Toets STD UREN Pulsante STD Ore

Taste MIN MINUTEN Button MIN Minutes

instructions for use

Technical specification Model 28016 Power Rating:

1.000 W, 230 V~, 50 Hz

Stainless steel, brushed,

Plastic parts black, textured

Plastic, semi-transparent, with water level indicator

Glass carafe with insulated plastic handle

approx. 1,5 l, 10 – 15 cups

Approx. 90 cm, firmly mounted

Electronic display with

• Timer function (24 hrs preset) • Clock Automatic disconnection after 2 hours Warming plate Swing-out folter with removable filter holder and drip stop Permanent filter

Glass carafe with lid

Filter holder with drip stop Permanent filter

Subject to technical modifications.

Important safeguards

1. Please read the following information and keep it for future reference. 2. This appliance is not intended for use by persons (including children) with limited physical, sensory or mental abilities or with lack of experience or lack of knowledge, unless they are supervised by a person who is responsible for their safety or have been instructed on how to use the appliance. 3. Children should be supervised in order to ensure that they do not play with the appliance. 4. Keep the appliance out of the reach of children. 5. Connect appliance only to an AC power supply with voltage corresponding to the voltage on the rating plate. 6. Do not operate this appliance with an external timer or remote control system.

7. For reasons of electrical safety, never immerse the appliance or the power cord in water or other liquids.

8. For reasons of electrical safety, do not clean the appliance in the dishwasher. 9. The switch and power cord should never come into contact with water or other liquids. In case this ever happens, all parts must be completely dry before operating the appliance again. 10. Never touch the appliance or power cord with wet hands. 11. This appliance is intended to be used in household and similar applications such as: ƒƒ staff kitchen areas in shops, offices and other working environments; ƒƒ farm houses; ƒƒ by client in hotels, motels and other working environments; ƒƒ bed and breakfast type environments.

12. For safety reasons, never place the app-liance on hot surfaces, a metal tray or a wet surface.

13. Do not place the appliance or power cord near open flames during operation. 14. Always use the coffeemaker on a level, uncluttered and heatresistant surface. 15. The appliance is approved for household use only and may be used only for brewing coffee, never for heating milk or other liquids or keeping them warm. 16. Make sure that the power cord does not hang over the edge of the countertop or table, since this can cause accidents, for example if small children pull on the cord. 17. Route the power cord so that there is no possibility of the cord being pulled or tripped over. 18. Do not wrap the power cord around the appliance and avoid kinking of the power cord to prevent damage. 19. Use the coffeemaker only indoors. 20. When in use, never cover the coffeemaker, since this could cause the appliance to overheat. 21. Only use fresh, cold water to brew coffee. Fill the water container at least up to the lowest marking (2 cups) and do not overfill. 22. Do not switch on the appliance until after you have filled the water tank with water.

23. In case of repeated use, allow the appliance to cool off at least 5 minutes between use.

24. Never use the coffee pot in the microwave; it is not suitable for such use. 25. Do not move the appliance as long as it is in operation, to prevent injuries. 26. Make sure that all users, especially children, are aware of the danger of injury from emerging steam and hot splashing water – danger of burns! 27. Do not use the appliance with accessories of other manufacturers or brands, to prevent damage. 28. Unplug the appliance from the power supply after use and prior to cleaning. Never leave the appliance unattended when it is plugged in to the power supply. 29. Check the appliance, the plug and the power cord regularly for wear or damage. In case of damage to the power cord or other parts, please send the appliance or the power cord for inspection and repair to our after sales service. Unauthorized repairs can result in serious risks to the user and void the warranty. 30. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

The manufacturer will not be liable in the event of incorrect assembly, improper or incorrect use or if repairs are carried out by unauthorized third parties.

tips for a perfect coffee

1. Keep your coffeemaker always clean and free from calcium (see chapter Cleaning and Descaling). 2. Keep coffee beans and powder in well closed box and in a dark and fresh place, but not in the refrigerator.

3. For optimum coffee taste we recommend to grind the coffee beans immediately before use and to use fresh water.

4. Freshly brewed coffee is best. If it is kept warm for a certain time, coffee be comes bitter. 5. To pour out the coffee, the lid of the carafe must not be opened.

before using the appliance

1. Carefully unpack your coffee maker. 2. Check if all parts as per description are contained. 3. Clean the carafe, the complete water tank, and the filter cone in warm soapy water, rinse them with clear water and dry them thoroughly. 4. Wipe the surface of the appliance with a damp cloth and dry it.

5. Remove the water tank and fill it up to the MAX marking with fresh cold water. Close the lid and place the tank on the housing.

6. Put the plug into the socket. 7. Before using the appliance for the first time or after a longer period, fill the water container up to the maximum with clear cold water and run it two or three times with water only.

presetting of the clock

1. After connection the appliance witht the power socket, the display shows 12:00 . 2. Press once the button PROG. The display gets lighted. 3. In the upper right corner of the display CLOCK is shown.

4. Press the buttons STD and MIN until the correct time is shown.

5. After approx. 10 seconds without operating any key, the display returns into the basic dialogue, the lighting is switched off.

The coffeemaker from allows to prepare coffee either manually or with the timer function which can be preset 24 hours in advance.

preparation of coffee without timer function

1. Take out the water tank (open the lid and use the integrated handle to pull it out) and fill it with the desired volume of cold water. The marking refers to the number of cups. Place the water tank on the machine. Attention: For safety reasons, the water tank has an overflow opening at the back. Please observe the MAX mark and do not overfill the tank, as water may flow out. 2. Please keep in mind that a certain portion of the water may evaporate during brewing. 3. For filling in ground coffee, open the swingout filter. Insert the filter holder. Take care that the projection of the filter holder fits into the recesses of the swing out filter. If not placed correctly, the filter cannot be closed. 4. Insert the permanent filter into the filter holder. 5. Optionally you can also use filter paper (size 1x4, 0994) after having folded the edges. The filter paper must not project over the filter holder.

6. Add the desired amount of ground coffee, depending on your taste 5-7 g (max. 1 measuring spoon) of medium ground coffee. If the coffee is ground too fine, the filter paper may be clogged up and the coffee may overflow.

7. Close the swing filter, until it clicks into place. 8. Place the carafe with lid on the warming plate. 9. Press the button EIN/AUS (On/OFF). The red control light EIN (ON) will turn on and brewing starts. 10. After the end of brewing you can switch off the appliance pressing twice the button EIN/AUS (On/OFF). 11. If the appliance is not switched off, the warming plate keeps warm. Two hours after beginning of the brewing, the appliance will switch off automatically. 12. If the appliance is switched off earlier the appliance can be scaled. In this case please follow the instructions of the chapter Cleaning and Descaling.

preparation of coffee with timer function

1. Please follow steps 1-8 of the previous chapter Preparation of coffee without timer function. 2. Then press the PROG button once and check, if the clock has been set correctly (see chapter Presetting of the clock). 3. Then press again the button PROG to preset the brewing. The display shows TIMER in the upper left corner.

Press the buttons STD and MIN until the required time is preset.

4. Then press twice the EIN/AUS button (on/off) to activate the AUTO function.

5. The green control light AUTO turns on and keeps on lighting. 6. To check the preset time, press the PROG button twice. The display shows TIMER and the preset time. If necessary you can change the time. 7. If not button is pressed, the display will return to the actual settings after approx. 10 seconds and the lighting turns out. 8. You can stop the AUTO-function at any time by pressing the EIN/AUS button twice. 9. When reaching the preset time, the green control light turns out and the red one turns on, brewing starts.

10. After the end of brewing you can switch off the appliance pressing twice the button EIN/AUS

(On/OFF). 11. If the appliance is not switched off, the warming plate keeps warm. Two hours after beginning of the brewing, the appliance will switch off automatically. 12. If the appliance is switched off earlier the appliance can be scaled. In this case please follow the instructions of the chapter Cleaning and Descaling. 13. The preset time is kept and can be reactivated by pressing the EIN/AUS button twice. 14. If you want to change the time presetting, just restart as described above.

1. Unplug the coffeemaker before cleaning and wait until it is completely cool. 2. Never immerse the appliance into water or any other liquid. 3. Open the swing filter and take out the permanent filter or the used paper filter and dispose it. 4. If any condensation water has occurred above the filter, just wipe it with a cloth. 5. The removable parts such as water tank, glass carafe with lid, filter holder and permanent fil-

ter can be cleaned in warm soapy water.

6. For easy cleaning the lid of the carafe can be opened by pressing the key on top of the handle. 7. Wipe the appliance and the warming plate with a damp cloth. 8. Do not use strong detergents or abrasive cloths/ liquid, as this will damage the surface. 9. Ensure that all parts have been thoroughly dried before using.

1. Regular descaling increases the lifetime and the performance of your coffeemaker 2. If the appliance switches off before the end of the keep-warm period of 2 hours or if water stays in the water tank after brewing, the appliance should be descaled. 3. We recommend to us a commercial descaler according to the instructions of the respective manufacturer. 4. Fill the water tank up to the MAX mark with the descaler solution. 5. Optionally you can use citric acid. Use 25-50 g per liter water. 6. Place the carafe on the warming plate.

7. Press the EIN/AUS button and let about 1/3 of the solution flow through.

8. Then switch off the appliance and leave it for at least 15-30 minutes. In case of strong calclim deposits you can also leave it overnight. 9. Then press the EIN/AUS button again to empty the water tank. 10. Pour away the descaler solution and rinse the appliance two to three times with fresh cold water.

Environ 1,5 l, 10 – 15 tasses

Guarantee Conditions

We grant a 24 months guarantee, and in case of commercial use a 12 months guarantee, starting from the date of purchase for any damage demonstrably due to manufacturing defects and when the appliance has been used according to its intended use. Within the warranty period we will remedy defective materials or workmanship through repair or replacement, at our option. Our warranty terms apply only to appliances sold in Germany and Austria. For other countries, please contact the responsible importer. In the event of a claim for remedy of defects, please send the appliance to our after sales service, properly packaged and postage paid, together with a copy of the automatically generated sales receipt, which must show the date of purchase, and a description of the defect. If the defect is covered by the warranty, the customer will be reimbursed for the shipping costs. The warranty does not cover damage from normal wear, improper handling and failure to comply with the maintenance and care instructions. The warranty is void if repairs or modifications are made to the appliance by third parties. Any claims of the end consumer vis-à-vis the retailer are not limited by this warranty.

Waste Disposal / Environmental Protection

Our appliances are produced on a high quality level for a long lifetime. Regular maintenance and expert repairs by our aftersales service can extend the useful life of the appliance. If an appliance is defective and repair is not possible we ask you to follow the following instructions for disposal. Do not dispose this appliance together with your standard household waste. Please bring this product to an approved collection point for recycling of electric and electronic products. By separate collection and disposal of waste products you help to protect natural resources and ensure, that the product is disposed in an adequate way to protect health and environment.