TONE ULTRA HBS-800 - Wireless Headphones LG - Free user manual and instructions

Product Type	Bluetooth Wireless Headset
Model	LG TONE ULTRA HBS-800
Weight	Approximately 50 g
Power Supply	Rechargeable lithium-ion battery
Talk Time	Up to 10 hours
Standby Time	Up to 300 hours
Charging Time	Approximately 2 hours
Connectivity	Bluetooth, hands-free and headset profiles
Bluetooth Version	Bluetooth 2.0 (compatible with later versions)
Bluetooth Range	Up to 10 meters
Main Functions	Answer/end call, call reject, voice dial, audio transfer, microphone mute
Display	LCD screen with connection, battery, volume, caller ID indicators
Volume Control	+ and - keys (levels 1 to 5)
LED Indicator	LED for charging status, pairing, low battery
Care and Cleaning	Clean with a soft, dry cloth. Do not use chemicals.
Safety	Do not expose to water or moisture. Use only the provided charger.
Spare Parts and Repairability	Parts not available individually. Contact LG customer service for repairs.
General Information	Compliant with FCC and CE standards. Brand LG.

Frequently Asked Questions - TONE ULTRA HBS-800 LG

How to turn the headset on and off?

To turn on, press and hold the Power/call key for more than 3 seconds. To turn off, press and hold it for more than 5 seconds.

How to pair the headset with my phone?

Simultaneously press the Power/call key and the Volume down key for at least 3 seconds. The headset will emit a melody and the LED will blink. Activate Bluetooth on your phone and select 'HBM-510' (or the headset name). Once paired, a melody sounds and the screen displays 'Connected'.

How long does it take to fully charge the headset?

Full charging takes about 2 hours. When the battery is full, the LED turns off.

How to answer an incoming call?

Press the Power/call key when the headset rings. The conversation starts automatically.

How to reject an incoming call?

Press and hold the Volume down key while ringing. The call is rejected.

How to use voice dialing?

Press the Power/call key twice until you hear a double beep. The headset activates the voice command of your phone.

How to transfer a call from the headset to the phone?

During a call, press and hold the Power/call key for 2 seconds. To switch back to the headset, press this key again.

How to mute the microphone during a call?

Press and hold the Volume down key for 2 seconds. 'Mic. Muted' appears and your caller cannot hear you. To unmute, press Volume down again.

What to do if the headset does not connect automatically?

Make sure Bluetooth is enabled on your phone. Press the Power/call key to connect the last paired device. If that does not work, re-enter pairing mode.

How to save battery?

The LCD screen turns off automatically after 20 seconds of inactivity. You can also turn off the headset when not in use by pressing and holding the Power/call key.

USER MANUAL TONE ULTRA HBS-800 LG

IX. Handsfree Profile Related Functions 6

1. Incoming Call 6
2. Picking up a Call 6
3. Making a Call 6
4. Terminating a Call 6
5. Audio Transfer 6
6. Call Reject 6
7. Microphone Mute 6

X. LCD ON / OFF 7
XI. LED ON / OFF 7

[ LCD Display ]

ICON	Discription
	Indicates Bluetooth connection status
	Microphone activity(Mute/UnMute)
	Call status
VOL-	Volume level
	Battery remain
1234567890	Displays caller id, Bluetooth status.

[ KEY Display ]

I. Booting

• Press and the Hold Power/call key for more than 3 seconds.
• LED indicates the "LG Electronics", and then "HBM-510".
  LCD will be Off and enter the Power saving Mode after 20 seconds without pressing any key.

II. Shut down

• Press and the Hold Power /call key for more than 5 seconds.
• LED indicates the "POWER OFF".

III. Charging

Before using your HBM-510, you need to charge it fully by plugging the charger into the DC jack outlet. When fully charged, LED lights will be turned off.

IV. Pairing

• Press the power/call button and Volume down button at the same time for at least 3 seconds.
• The headset will notify you it is in pairable mode with a melody.
• Flickering LED periodically for one or two second means that the headset is waiting for pairing with other Bluetooth enabled devices.
• Pair the headset to the Bluetooth enabled phone while the headset is in pairable mode.
• When pairing has been completed, a melody will be played. If pairing is successful, LCD is displayed "connected", and then "HBM- 510".

V. Waiting

• The connecting mode from the registered Phone to the Bluetooth Headset.
• Press the Headset button to connect to the registered device

VI. Connect

• Even if the headset is not connected to any Bluetooth device, pressing the power/call button will automatically connect it to the last device connected. The connection supports both the handsfree profile and headset profile.

If the sign 'Connected' does not appear, try connecting again after switching the headset to Pairing Mode.

(In case of pairing of bluetooth with headset)

For last number redial, press the Power/call Button once until a short beep is heard. LED indicates the "Voice Command"

With certain types of Bluetooth handsets, the user may need to press the Power/call Button twice.

To activate Voice dialing, press the talk Button until it beeps twice. LED indicates the "Last Number Dial".

When the "call ended" is displayed in the LED, the call will be terminated.

VII. Disconnect

Cancel the connection operating the phone menu to disconnect the Bluetooth.

VIII. Volume Up and Down

Press the Volume (+) Button to increase the speaker sound, and the Volume (-) Button to lower the sound.

The volume level can be adjusted from 1 to 5.

VOL4.11

• The volume is made up to correspond with the volume level of the connected phone.

IX. Handsfree Profile Related Functions

All functions in this section should premise that the Handsfree profile of the Headset connect to the phone.

1. Incoming Call

• On a phone, which supports the handsfree profile: Press the power/call key if you want to answer the call.
• Some phones support automatic answering. Please refer to your Handset Guide for information on this feature.

2. Picking up a Call

• Press the Power/call button in the front of the Headset in the state of Ring Alerting to pick up a call.
• The phone Icon in the top of the LCD is indicated when start talking.

3. Making a Call

• If you make a call from the Headset, the call will (subject to phone settings) be automatically transferred to the Headset, If not automatically transfer the call manually by pressing the Power/call button.

4. Terminating a Call

Press the Power/call button when ringing with headset.

5. Audio Transfer

• To transfer a call from the Headset to the HBM-500, press the Power/call button at least 2seconds while answering.
• To transfer a call back to the Headset, Just press the Power/call button again.

6. Call Reject

• Press and hold the "Volume down" button when ringing.

7. Microphone Mute

• Press the Volume Down button 2 seconds during the talking using the Headset.

• "Mic. Muted" will be displayed and the Mic. Icon will be disappeared after the Beep sound.

• Using this function, the other party can not hear my voice.

X. LCD ON / OFF

In order to save power, the LCD automatically switches off if the headset does not receive any input or event (e.g. pairing request, incoming call, etc.) for 20 seconds.

• Note that when the LCD is turned off, it does not necessarily mean that the headset is turned off.
• When the user presses on any key, the LCD lits up. Note however that during battery charging the headset power is off and only the LED is on.

XI. LED ON / OFF

Headset status	LED indication
Power on, Power off	LED light flashes on five times quickly
Pairing mode	LED light remains on until paired successful. ( In the case of pass the 60 seconds-> off )
Low battery	LED light flashes on three times per 10 seconds
Charging	Until finish the charging
Press the any button	LED light remains on 1 second

CE0197 FCC Bluetooth®

>

* Section 15.19 Labelling requirements

This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may cause undesired operation.

* Section 15.21 Information to user

The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

• IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user's authority to operate the device.