FS-C8520MFP - FS-C8525MFP - Color multifunction printer KYOCERA - Free user manual and instructions

USER MANUAL FS-C8520MFP - FS-C8525MFP KYOCERA

Exterior view of a white ECOSYS P2040dw printer (no visible text or symbols on body)

Préface

Diagram showing barcode scanner with a barcode symbol and an asterisk pointing to it, indicating a specific barcode.

Safety Instructions Regarding the Disconnection of Power 1-7

Compliance and Conformity 1-7

Other precautions (for users in California, the United States) 1-7

EN ISO 7779 1-7

EK1-ITB 2000 1-8

Wireless Connection (Mexico only) 1-8

Programme Energy Star (ENERGY STAR®) 1-14

Configuration Wi-Fi Direct 2-24

Command Center RX 2-44

Ajuster/Maintenance 6-23

État filaire 6-23

Etat Wi-Fi 6-23

Wi-Fi Direct 6-24

Simple diagram showing a storage unit and a speaker icon with sound waves (no text or symbols)

Diagram showing a computer with signal waves and a document icon above a file folder, likely illustrating wireless communication or system interaction.

Safety Instructions Regarding the Disconnection of Power 1-7

Compliance and Conformity 1-7

Other precautions (for users in California, the United States) 1-7

EN ISO 7779 1-7

EK1-ITB 2000 1-8

Wireless Connection (Mexico only) 1-8

Programme Energy Star (ENERGY STAR®) 1-14

Avis

CLASS 1 LASER PRODUCT

KLASSE 1 LASER PRODUKT

SAFETY OF LASER BEAM (USA)

1. Safety of laser beam

This machine has been certified by the manufacturer to Class 1 level under the radiation performance standards established by the U.S.DHHS (Department of Health and Human Services) in 1968. This indicates that the product is safe to use during normal operation and maintenance. The laser optical system, enclosed in a protective housing and sealed within the external covers, never permits the laser beam to escape.

2. The CDRH Act

A laser-product-related act was implemented on Aug. 2, 1976, by the Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration (FDA). This act prohibits the sale of laser products in the U.S. without certification, and applies to laser products manufactured after Aug. 1, 1976. The label shown below indicates compliance with the CDRH regulations and must be attached to laser products marketed in the United States. The position of the rating label is show below.

ECOSYS xxxxxxxx

3. Maintenance

For safety of the service personnel, follow the maintenance instructions in the other section of this manual.

4. Safety switch

The power to the laser unit is cut off when the front cover is opened.

Safety Instructions Regarding the Disconnection of Power

Caution: The power plug is the main isolation device! Other switches on the equipment are only functional switches and are not suitable for isolating the equipment from the power source.

Compliance and Conformity

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- The use of a non-shielded interface cable with the referenced device is prohibited.

CAUTION — The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of FCC Rules.

Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter.

* The above statements are valid only in the United States of America and Canada.

NOTE — Use shielded interface cables.

Other precautions (for users in California, the United States)

Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.

EN ISO 7779

Wireless Connection (Mexico only)

The operation of this equipment is subject to the following two conditions:

(1) it is possible that this equipment or device may not cause harmful interference, and (2) this equipment or device must accept any interference, including interference that may cause undesired operation.

Copyright (c) 1998-2006 OpenSSL Project. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact [e-mail].
5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Original SSLeay License

This package is an SSL implementation written by Eric Young ([e-mail]). The implementation was written so as to conform with Netscapes SSL.

This library is free for commercial and non-commercial use as long as the following conditions are adhered to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, Ihash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson ([e-mail]).

Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed.

If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used.

This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgement: "This product includes cryptographic software written by Eric Young ([e-mail])" The word 'cryptographic' can be left out if the routines from the library being used are not cryptographic related :-).
4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: "This product includes software written by Tim Hudson ([e-mail])"

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The licence and distribution terms for any publicly available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.]

Monotype Imaging License Agreement

1 Software shall mean the digitally encoded, machine readable, scalable outline data as encoded in a special format as well as the UFST Software.
2 You agree to accept a non-exclusive license to use the Software to reproduce and display weights, styles and versions of letters, numerals, characters and symbols (Typefaces) solely for your own customary business or personal purposes at the address stated on the registration card you return to Monotype Imaging. Under the terms of this License Agreement, you have the right to use the Fonts on up to three printers. If you need to have access to the fonts on more than three printers, you need to acquire a multiuser license agreement which can be obtained from Monotype Imaging. Monotype Imaging retains all rights, title and interest to the Software and Typefaces and no rights are granted to you other than a License to use the Software on the terms expressly set forth in this Agreement.
3 To protect proprietary rights of Monotype Imaging, you agree to maintain the Software and other proprietary information concerning the Typefaces in strict confidence and to establish reasonable procedures regulating access to and use of the Software and Typefaces.
4 You agree not to duplicate or copy the Software or Typefaces, except that you may make one backup copy. You agree that any such copy shall contain the same proprietary notices as those appearing on the original.
5 This License shall continue until the last use of the Software and Typefaces, unless sooner terminated. This License may be terminated by Monotype Imaging if you fail to comply with the terms of this License and such failure is not remedied within thirty (30) days after notice from Monotype Imaging. When this License expires or is terminated, you shall either return to Monotype Imaging or destroy all copies of the Software and Typefaces and documentation as requested.
6 You agree that you will not modify, alter, disassemble, decrypt, reverse engineer or decompile the Software.
7 Monotype Imaging warrants that for ninety (90) days after delivery, the Software will perform in accordance with Monotype Imaging-published specifications, and the diskette will be free from defects in material and workmanship. Monotype Imaging does not warrant that the Software is free from all bugs, errors and omissions.
The parties agree that all other warranties, expressed or implied, including warranties of fitness for a particular purpose and merchantability, are excluded.
8 Your exclusive remedy and the sole liability of Monotype Imaging in connection with the Software and Typefaces is repair or replacement of defective parts, upon their return to Monotype Imaging.
In no event will Monotype Imaging be liable for lost profits, lost data, or any other incidental or consequential damages, or any damages caused by abuse or misapplication of the Software and Typefaces.
9 Massachusetts U.S.A. law governs this Agreement.

10 You shall not sublicense, sell, lease, or otherwise transfer the Software and/or Typefaces without the prior written consent of Monotype Imaging.
11 Use, duplication or disclosure by the Government is subject to restrictions as set forth in the Rights in Technical Data and Computer Software clause at FAR 252-227-7013, subdivision (b)(3)(ii) or subparagraph (c)(1)(ii), as appropriate. Further use, duplication or disclosure is subject to restrictions applicable to restricted rights software as set forth in FAR 52.227-19 (c)(2).
12 You acknowledge that you have read this Agreement, understand it, and agree to be bound by its terms and conditions. Neither party shall be bound by any statement or representation not contained in this Agreement. No change in this Agreement is effective unless written and signed by properly authorized representatives of each party. By opening this diskette package, you agree to accept the terms and conditions of this Agreement.

Programme Energy Star (ENERGY STAR®)

ENERGY STAR

Configuration Wi-Fi Direct 2-24

Command Center RX 2-44

Line drawing of a 3D printer or printer casing with visible door, ventilation slots, and top cover (no text or symbols)

Line drawing of a printer with visible internal components and a numbered label '8' (no text or symbols on the device itself)

Exploded view diagram of a printer showing internal structure and labeled parts from 3 to 9

Diagram showing connection between a server and a device with a highlighted internal component, including an outlet cable.

Diagram showing connection between a printer and a device with an attached port, highlighting a specific port symbol.

Illustration of a printer with a highlighted power button (no text or symbols present)

Mise hors tension

1 Mettre la machine hors tension.

Illustration of a printer with a power button icon and directional arrow (no text or symbols)

Illustration of a hand holding a CD to open a laptop screen (no text or symbols present)

REMARQUE

Illustration of a hand holding a CD to open a laptop screen (no text or symbols visible)

REMARQUE

Illustration of a hand holding a CD to open a laptop screen (no text or symbols visible)

REMARQUE

Illustration of a hand holding a CD to open a laptop screen (no text or symbols present)

REMARQUE

Illustration of a hand holding a CD to open a laptop screen (no text or symbols present)

Illustration showing two hands exchanging a stack of papers and a closed book, with arrows indicating motion (no text or symbols)

Diagram showing a printer casing being inserted into a plastic housing, with an arrow indicating the process (no text or symbols present)

REMARQUE

Illustration of a hand placing a blue plastic component into a mechanical device (no text or symbols visible)

Technical diagram showing a device's internal structure with labeled parts and an inset view of the component being inserted.

Diagram showing a mechanical component with labeled parts and an inset view highlighting a circular feature, marked as (1) and (2).

Technical diagram of a device's internal structure with labeled parts and an inset view showing component details.

Technical diagram showing assembly of a device with labeled components and directional arrows indicating process flow

IMPORTANT

3D diagram of a blue plastic container with an arrow pointing to the side (no text or symbols)

IMPORTANT

Diagram showing a printer with a blue liquid level inside a paper box, connected to a paper holder and pointing at a button.

6 Afficher l'écran.

Touche [Menu] > Touche [▲] [▼] > [Param. papier] > Touche [▶] > Touche [▲] [▼] > [Format bac 1 à 3] > Touche [▶]

Line drawing of a printer with a blue arrow indicating a component or operation (no text or symbols present)

0% 98% Papier vide

Illustration of a hand holding a CD to open a laptop screen (no text or symbols visible)

REMARQUE

Illustration of a printer's internal structure with blue plastic casing and a red triangular play button (no text or symbols)

Diagram of a printer's internal structure showing paper feed and paper sheet being inserted (no text or symbols)

A6 | STMT | B5 | A4 | A5 | LTR LGL

Diagram of a printer printer with an arrow indicating direction, showing internal components and a magnified inset (no text or symbols)

graph TD
    A["Printer 1"] --> B["Printer 2"]
    B --> C["Printer 3"]
    C --> D["Printer 4"]

Line drawing of a printer with a close-up inset showing the internal component (no text or symbols)

2 Afficher l'écran.

Touche [Menu] > Touche [▲] [▼] > [Mémoire USB] > Touche [▶]

3 Imprimer le document.

Ajuster/Maintenance 6-23

État filaire 6-23

État Wi-Fi 6-23

Wi-Fi Direct 6-24

Menu Système

Configurer Wi-Fi Direct.

REMARQUE

Card Authentication Kit(B) "Card Authentication Kit" (page 9-2)

Card Authentication Kit(B) "Card Authentication Kit" (page 9-2)

1 Afficher l'écran.

Diagram showing printer internal structure before and after assembly, with numbered annotations indicating component placement.

Technical illustration of two mechanical components with a prohibition symbol (no text or labels present)

IMPORTANT

Technical illustration of two mechanical components with a prohibition symbol (no text or labels)

IMPORTANT

Illustration of a printer's internal structure with a hand inserting a component (no text or symbols visible)

Diagram showing a hand pressing a component on a printer with an inset close-up of the component's internal structure.

IMPORTANT

Illustration of hands installing or adjusting a printer into an open box (no text or symbols visible)

Illustration of hands installing or adjusting a printer into an open circuit board (no text or symbols visible)

3D diagram of an open printer internal structure showing internal components and a blue component, with no visible text or symbols.

10 Refermer le capot avant.

Illustration of a blue printer with an arrow indicating rotation or compression (no text or symbols present)

Illustration of a printer with a paperclip and control panel, showing no text or symbols on the device itself.

Diagram of an HP printer internal structure with numbered components and directional arrows indicating assembly or operation.

Diagram of a printer internal structure with an inset showing a blue circular component and arrows indicating assembly (no text or symbols present)

Interior view of a printer's internal structure showing the blue plastic cover and paper holder (no text or symbols visible)

3 Retirer la cartouche de toner.

Diagram of a printer internal structure showing hands operating the lid and casing (no text or symbols visible)

Diagram of a blue mechanical component being wrapped in a transparent sheet, with an arrow indicating motion (no text or symbols present)

Blue plastic mechanical component with a magnified inset showing a folded paper box (no text or symbols)

IMPORTANT

Diagram of a mechanical device with labeled components and prohibition symbols indicating no protection or disapproval.

6 Agiter la cartouche de toner.

5~6 ...

7 Installer la cartouche de toner.

Diagram of hands operating a printer drawer with a blue plastic component being inserted (no text or symbols visible)

Diagram of a printer internal structure showing internal components and a magnified view of the interior (no text or symbols)

8 Fermer le capot avant.

Illustration of a blue printer with arrows indicating motion or rotation (no text or symbols)

REMARQUE

Diagram showing a printer's internal structure being processed into a blue plastic holder (no text or symbols present)

Diagram of a printer or printer with paper sheet and paper holder, showing no text or symbols

3D diagram of a blue plastic container with an arrow pointing to the bottom side (no text or symbols)

Line drawing of a printer with a blue button and arrow pointing to the top panel (no text or symbols present)

Diagram of an HP printer internal structure showing internal components and a blue cover (no text or labels)

5 Refermer le capot avant.

Illustration of a blue printer with an arrow indicating a loading or movement (no text or symbols present)

Diagram of a printer with an open lid and blue plastic holder, showing internal structure without any text or symbols.

Line drawing of a printer printer with paper being inserted (no text or symbols)

Diagram of a device's internal structure with a blue highlighted component and an arrow indicating direction (no text or symbols)

Line drawing of a printer with a paper outlet and a downward arrow indicating a drop or location (no text or symbols present)

Diagram of an open printer with internal structure and a blue plastic cover, showing no text or symbols.

5 Refermer le capot avant.

Illustration of a blue printer with an arrow indicating a loading or movement (no text or symbols present)

Diagram of a printer with an open lid and a blue plastic holder, showing internal components (no text or symbols)

Diagram of a printer printer with paper being inserted, showing paper flow direction (no text or symbols)

Diagram of a container with blue and gray layers and an arrow indicating direction (no text or symbols)

Line drawing of a printer with a paper outlet and a downward arrow indicating a drop or location (no text or symbols present)

Diagram of an open printer with internal structure and a blue plastic cover, showing no text or symbols.

5 Refermer le capot avant.

Illustration of a blue printer with an arrow indicating the print direction (no text or symbols present)

Line drawing of a printer with paper being inserted, showing internal structure and page loading (no text or symbols)

Diagram of a printer printer with paper sheets and an arrow indicating the printer's internal structure (no text or symbols present)

Illustration of a printer with paper feed and paper output, showing internal components (no text or symbols)

Diagram showing a printer being placed into a blue plastic holder, with an arrow indicating the process (no text or symbols present)

Diagram of a printer paper feeding into a paper holder, showing paper movement (no text or symbols)

Diagram of a blue plastic container with an arrow pointing to the side (no text or symbols present)

Diagram showing a printer's internal structure before and after assembly, with labeled parts and directional arrows.

IMPORTANT

Technical line drawing of two mechanical components with a prohibition symbol (no text or labels present)

IMPORTANT

Technical illustration of two mechanical components with a prohibition symbol (no text or labels present)

IMPORTANT

Diagram showing the internal structure of a printer with labeled parts and a red arrow indicating transformation.

Cross-sectional diagram of an open printer showing internal structure and paper plane (no text or labels)

Interior view of a printer showing internal structure with a blue stripe and arrow indicating a component (no text or symbols present)

Illustration of hands installing or adjusting a blue plastic sheet inside an open printer (no text or symbols visible)

Illustration of a printer's internal structure before and after disassembly, showing blue plastic casing being removed (no text or symbols)

14 Refermer le capot avant.

Illustration of a blue printer with arrows indicating motion or rotation (no text or symbols)

Line drawing of a server rack with a blue mesh component inserted, showing internal structure and a blue mesh outlet (no text or symbols)

Line drawing of a printer with internal circuitry and paper feed, showing no text or symbols

Line drawing of an open industrial machine with internal components and a blue panel on top (no text or symbols)

Diagram of a printer with labeled parts and magnified view showing internal structure

Diagram of an open computer with internal components and a blue arrow indicating a process (no text or symbols present)

Line drawing of a printer with internal components and a paper feed into the cover (no text or symbols)

Diagram showing a printer being inserted into a blue plastic holder, with an arrow indicating the process (no text or symbols present)

Technical line drawing of a printer internal structure (no text or symbols)

Diagram of a printer internal structure showing internal components and a highlighted section (no text or symbols)

Line drawing of a printer or printer with a paper feeding into a slot (no text or symbols present)

Diagram of a printer internal structure showing internal components and a blue arrow indicating a specific part (no text or symbols present)

Diagram of a device's front panel with a blue handle and arrow indicating direction (no text or symbols)

Diagram of a printer or printer with a blue cover and arrow indicating rotation (no text or symbols present)

Line drawing of a printer with a paperclip and arrow indicating a drop or press operation (no text or symbols present)

Diagram of an open printer showing internal structure and a blue cover (no text or symbols)

12 Refermer le capot avant.

Illustration of a blue printer with an arrow indicating a loading or movement (no text or symbols present)

Line drawing of a printer with internal structure and blue plastic film inside (no text or symbols)

Line drawing of an open industrial machine with internal components and ventilation ducts (no text or symbols)

Diagram of a printer or printer with a blue cover and arrow indicating rotation (no text or symbols present)

Diagram showing a printer being placed into a blue plastic holder, with an arrow indicating the process (no text or symbols present)

Technical line drawing of a mechanical device with internal components and no visible text or symbols

Diagram of a device interior showing internal components and a highlighted area with an arrow (no text or symbols)

Line drawing of a printer or printer with visible internal structure and page number (no text or symbols)

Diagram of a printer internal structure showing internal components and a blue arrow indicating a specific part (no text or symbols present)

Diagram of a device's front panel with a blue handle and arrow indicating direction (no text or symbols)

Line drawing of a printer with a paperclip and control panel, no text or symbols present

Diagram of an open printer showing internal structure and a blue cover (no text or symbols)

10 Refermer le capot avant.

Illustration of a blue printer with an arrow indicating a loading or movement (no text or symbols present)

9 Annexe

(1) PF-1100 (2) Card Authentication Kit (B)

Option logicielle

(4) UG-33

(5) SD/SDHC Memory Card

(2) Card Authentication Kit(B) "Card Authentication Kit"

Card Authentication Kit(B) Operation Guide

(3) UG-33 "Option ThinPrint"

Line drawing of a server rack with internal components and a blue mesh component being inserted (no text or symbols)

Diagram showing server rack with labeled components and directional arrows indicating movement or assembly steps

Technical diagram of a computer interface showing internal components and a black arrow indicating a specific area (no text or symbols present)

Diagram showing two views of a server rack with internal components and directional arrows (no text or symbols)

Applications en option

2 Activer/désactiver l'application.

Card Authentication Kit 9-2

Carte SD 9-3

Formater 6-18

Cartouche de toner 2-4

Command Center RX 2-44

Communication

Energy Star (ENERGY STAR®) Programme 1-14

Enhanced WSD

Imprimer Structure Menus 6-4

Monotype Imaging License Agreement 1-12

Mopria 4-10

N

NetBEUI 9-21

Card Authentication Kit 9-2

Carte SD 9-3

Polices contour 9-21

POP3 9-21

Wireless Connection 1-8

This machine has passed all quality controls and final inspection.

KYOCERA Document Solutions America, Inc.

Headquarters

225 Sand Road,

Fairfield, New Jersey 07004-0008, USA

Phone: [phone]

Fax: [phone]

Latin America

8240 NW 52nd Terrace Dawson Building, Suite 100

Miami, Florida 33166, USA

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Canada, Ltd.

6120 Kestrel Rd., Mississauga, ON L5T 1S8, Canada

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions

Mexico, S.A. de C.V.

Calle Arquimedes No. 130, 4 Piso, Colonia Polanco

Chapultepec, Delegacion Miguel Hidalgo,

KYOCERA Document Solutions Brazil, Ltda.

Alameda África, 545, Pólo Empresarial Consbrás, Tamboré, Santana de Parnaíba, State of São Paulo, CEP 06543-306, Brazil

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Chile SpA

Jose Ananias 505, Macul. Santiago, Chile

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions

Australia Pty. Ltd.

Level 3, 6-10 Talavera Road North Ryde N.S.W, 2113, Australia

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions

New Zealand Ltd.

Ground Floor, 19 Byron Avenue, Takapuna, Auckland, New Zealand

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Asia Limited

Unit 3 & 5, 16/F., Mita Centre, 552-566, Castle Peak Road

Tsuen Wan, New Territories, Hong Kong

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions

(China) Corporation

8F, No. 288 Nanjing Road West, Huangpu District,

Shanghai,200003, China

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions

(Thailand) Corp., Ltd.

335 Ratchadapisek Road, Wongsawang, Bangsue, Bangkok 10800, Thailand

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions

Singapore Pte. Ltd.

12 Tai Seng Street #04-01A,

Luxasia Building, Singapore 534118

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions

Hong Kong Limited

Unit 1,2,4,6,8 & 10, 16/F., Mita Centre, 552-566, Castle

Peak Road Tsuen Wan, New Territories, Hong Kong

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions

Taiwan Corporation

6F., No.37, Sec. 3, Minquan E. Rd.,

Zhongshan Dist., Taipei 104, Taiwan R.O.C.

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Korea Co., Ltd.

3F Daewoo Foundation Bldg 18, Toegye-ro, Jung-gu, Seoul, Korea

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions

India Private Limited

Second Floor, Centrum Plaza, Golf Course Road,

Sector-53, Gurgaon, Haryana 122002, India

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Europe B.V.

KYOCERA Document Solutions (U.K.) Limited

Eldon Court, 75-77 London Road,

Reading, Berkshire RG1 5BS,

United Kingdom

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Italia S.p.A.

Via Monfalcone 15, 20132, Milano, Italy,

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Belgium N.V.

Sint-Martinusweg 199-201 1930 Zaventem,

Belgium

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions France S.A.S.

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Espana, S.A.

South Africa (Pty) Ltd.

KYOCERA House, Hertford Office Park,

90 Bekker Road (Cnr. Allandale), Midrand, South Africa

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Russia LLC.

Building 2, 51/4, Schepkina St., 129110, Moscow, Russia

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Middle East

Dubai Internet City, Bldg. 17,

Office 157 P.O. Box 500817, Dubai,

United Arab Emirates

Phone: [phone]

KYOCERA Document Solutions Inc.

2-28, 1-chome, Tamatsukuri, Chuo-ku

Osaka 540-8585, Japan

Phone: [phone]

http://www.kyoceradocumentsolutions.com