T400 - Mouse LOGITECH - Free user manual and instructions

Brand	LOGITECH
Model	T400
Category	Mouse
Type	Wireless touch mouse
Connection technology	Logitech Unifying (2.4 GHz)
Range	Approximately 10 m
Sensor	Optical
Resolution	1000 dpi
Number of buttons	3 (left click, right click, scroll wheel)
Touch surface	Yes, touch scroll strip
Power supply	2 AA batteries
Estimated battery life	Up to 6 months
Dimensions (L x W x H)	105 x 65 x 35 mm
Weight (with batteries)	Approximately 100 g
Compatibility	Windows, Mac
Box contents	Mouse, Unifying receiver, 2 AA batteries, documentation
Main features	One-finger scrolling, access to Start screen, customizable gestures
Software	Logitech Options (download at logitech.com)
Care and cleaning	Clean with a soft, dry cloth. Do not use liquids.
Safety	Do not immerse. Replace defective batteries.
Spare parts and repairability	Not available. Contact Logitech support in case of failure.
General information	Uses the Unifying receiver to connect up to 6 compatible devices.

Frequently Asked Questions - T400 LOGITECH

How to connect the T400 mouse to my computer?

Insert the Unifying receiver into a USB port on your computer. The mouse is automatically recognized.

What to do if the mouse does not work?

Restart the mouse by turning the switch to Off then On. Check that the receiver is properly connected. If the LED blinks red, replace the batteries.

Which software is recommended for this mouse?

The Logitech Options software enhances use with additional gestures. Download it at www.logitech.com/download/t400.

How to replace the batteries of the T400 mouse?

Remove the battery compartment cover, insert two AA batteries respecting polarity, then close the cover.

Can I connect multiple devices with a single receiver?

Yes, Logitech Unifying technology allows you to connect up to six compatible keyboards and mice to one receiver.

What does the blinking red LED mean?

The blinking red LED indicates low batteries. Replace the batteries as soon as possible.

How to use the touch strip of the T400?

Slide your finger up, down, or sideways on the touch strip to scroll. Click on the top two-thirds to access the Start screen.

Is the mouse compatible with Mac?

Yes, the T400 mouse is compatible with Windows and Mac systems. Some features may require Logitech Options software.

How to clean the T400 mouse?

Use a soft, dry cloth to clean the surface. Do not use liquid or abrasive products.

Where to find the product page of the T400 mouse?

Visit www.logitech.com and search for 'T400' or go directly to the dedicated page via the link in Logitech Options software for tutorials and support.

USER MANUAL T400 LOGITECH

1. Plug in the receiver

Plug the Unifying receiver into a USB port.

2. Power on the mouse

Move the power switch to the On position.

Check the battery status light. Red means it's time to change the battery.

Power switch in the On position

3. Software installation

You are prompted to install Logitech software that enhances your Touch Mouse experience with additional gestures, smoother performance, and personalized settings.

Follow the onscreen instructions to complete installation.

No prompt?

Download the software from:

www.logitech.com/download/t400

Visit the Product Page

While you're online, check out the Zone Touch Mouse T400 Product Page, your destination for world-class support.

www.logitech.com/support/t400

In addition to software, you'll find tutorials, troubleshooting tips, and guidelines for using your new Touch Mouse.

The Product Page is also home to live forums that connect you to a global community of knowledgeable users.

Using the mouse

One finger scrolling

Swipe up, down, or sideways on the touch strip.

Clicking

The Touch Mouse provides full 3-button operation. Click the left, right, or middle area of the mouse surface.

Click the top 2/3 of the touch strip to go to the Windows Start screen.

Replace batteries

Remove the battery cover and insert new batteries into the compartment.

Unifying

Logitech Unifying technology connects up to six compatible Logitech mice and keyboards to the same receiver, using only one USB port for multiple devices. To learn more, visit:

www.logitech.com/support/unifying

unifying

Troubleshooting

Touch Mouse not working?

• Restart the mouse by turning it off and then back on.
• Check if your Unifying receiver is properly connected to a USB port.
• Move the Unifying receiver to another USB port on your computer. (Try connecting directly to your computer instead of using a USB hub.)
• Remove any metallic objects near the mouse.
• If the status light blinks red, replace the battery.

www.logitech.com/support/unifying

www.logitech.com/support/unifying

www.logitech.com/support/unifying

www.logitech.com/support/unifying

unifying

www.logitech.com/support/unifying

unifying

www.logitech.com/support/unifying

unifying

Troubleshooting

3. Software installation

www.logitech.com/support/unifying

unifying

Troubleshooting

Your Zone Touch Mouse T400

Your Zone Touch Mouse T400

Install your mouse

1. Plug in the receiver

Connect the Unifying receiver to a USB port.

2. Turn on the mouse

The power switch should be set to "On".

www.logitech.com/support/unifying

unifying

Troubleshooting

Is your Touch Mouse not working?

www.logitech.com/support/unifying

unifying

Troubleshooting

Is your Touch Mouse not working?

• Restart the mouse by turning it off and on again.
• Make sure the Unifying receiver is properly connected to a USB port.
• Move the Unifying receiver to another USB port on your computer. (Try connecting directly to the computer instead of using a USB hub.)
• Remove metal objects near the mouse.
• If the status light blinks red, you must replace the battery.

Setting up the mouse

www.logitech.com/support/unifying

Troubleshooting

www.logitech.com/support/unifying

unifying

www.logitech.com/support/unifying

unifying

Troubleshooting