DW6010 ECO INTELLIGENCE - Iron ROWENTA - Free user manual and instructions

Product type	Steam iron
Brand	ROWENTA
Model	DW6010 ECO INTELLIGENCE
Power supply	220-240 V ~ 50-60 Hz
Power	2400 W
Tank capacity	300 ml
Soleplate type	Ceramic soleplate
Weight	1.5 kg
Cord length	2 m
Steam functions	Spray, Steam burst, Vertical steam burst, ECO steam, BOOST steam
Anti-drip system	Yes
Auto shut-off	Yes, 30 s on soleplate or side, 8 min on heel
Self-cleaning	Yes, Self Clean function
Anti-scale filter	Yes, integrated non-replaceable cartridge
Ergonomic handle	Yes, with integrated iron rest
Maintenance	Clean the soleplate with a damp cloth, use Self Clean every 2 weeks
Warranty	2 years, spare parts available at authorized service center

Frequently Asked Questions - DW6010 ECO INTELLIGENCE ROWENTA

What water to use in the ROWENTA DW6010 iron?

Use tap water up to 17° dH. For harder water, mix 50% tap water and 50% distilled water. Never use dryer water, scented water, softened water, or battery water.

How to perform self-cleaning (Self Clean)?

Fill the tank to max, set the thermostat to max, unplug the iron, hold it horizontally over the sink, set the steam control to SELF CLEAN and shake gently. After 1 minute, return to DRY position, plug back in and let the water evaporate.

Why is no steam coming out?

Check that the steam control is not on DRY. Fill the tank if necessary. If the soleplate is not hot enough, wait until the light goes off. The anti-drip system blocks steam if the temperature is too low.

What to do if water leaks from the soleplate?

This happens if the temperature is too low or if you press the steam button too often. Increase the thermostat and space out the bursts. If the problem persists, perform a Self Clean.

How to use the vertical steam burst?

Hold the iron vertically, 10-20 cm from the fabric, and press the steam burst control. Suitable for removing creases from hanging garments and curtains. Never direct steam towards people.

The iron turns off by itself, is this normal?

Yes, it is the automatic safety shut-off. It activates after 30 seconds if the iron is resting on the soleplate or side, or after 8 minutes on the heel. Move the iron to reactivate it.

What is the purpose of ECO mode?

ECO mode optimizes the steam flow for each type of fabric while reducing energy consumption. It is ideal for efficient and economical ironing.

How to clean the soleplate?

Let the iron cool down, then wipe the soleplate with a damp cloth. Never use abrasive products or sharp objects. For stubborn dirt, use the Self Clean function.

Can I use demineralized water?

No, pure demineralized water can cause spitting and brown stains. Use tap water or a 50/50 mix with distilled water if your water is very hard.

How to store the iron after use?

Unplug the iron, empty the residual water, set the steam to DRY, let it cool completely (about 1 hour), then store it upright on its heel. Do not wrap the cord around the hot soleplate.

USER MANUAL DW6010 ECO INTELLIGENCE ROWENTA

(with slide-button opening)

3 Eco steam system

a Dry ironing 空 DRY
b ECO position
C BOOST position

4 Self Clean
5 Spray button
6 Shot of steam button

7 Cord
8 Handle
9 Thermostat control light
10 Temperature control dial
11 Water tank
12 Maximum water level indicator
13 Soleplate
14 Auto-Off*
15 High Precision TIP

SAFETY INSTRUCTIONS

This appliance complies with the technical rules and standards for safety currently in force (Electromagnetic Compatibility, Low Voltage, Environnement).

• Please read these instructions carefully and keep them for future reference.

• This appliance is not designed to be used by people (including children) with a physical, sensory or mental impairment, or people without knowledge or experience, unless they are supervised or given prior instructions concerning the use of the appliance by someone responsible for their safety. Children must be supervised to ensure that they do not play with the appliance.

• Warning! The voltage of your electrical installation must correspond to that of the iron (220V-240V or 127V depending on model). Connecting to the wrong voltage may cause irreversible damage to the iron and will invalidate the guarantee.
• This iron must always be plugged into an earthed socket. If using a mains extension lead, ensure that it is correctly rated (16A, depending on model), with an earth connection.
• If the electrical cord becomes damaged, it must be immediately replaced by an Approved Service Centre to avoid any danger.
• The appliance should not be used if it has fallen, if it has obvious damage, if it leaks or has functional anomalies. Never dismantle your appliance : have it inspected by an Approved Service Centre, so as to avoid any danger.
• Never immerse your iron in water!
• Do not unplug your appliance by pulling on the cord. Always unplug your appliance : before filling - fig. 4 or rinsing the water tank, before cleaning it, after each use.
• Never leave the appliance unattended when it is connected to a power source; if it has not cooled down for approximately 1 hour.
• Your appliance gives off steam, which may cause burns, especially when you are ironing close to the edge of your ironing board. Never direct the steam towards people or animals.
• Your iron should be used and placed on a flat, stable, heat-resistant surface. When you put your iron to rest on its heel, make sure that the surface on which you put it is stable.
• This product has been designed for domestic use only. Any commercial use, inappropriate use or failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee will not apply.

Environment protection first !

① Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point.

KEEP THESE INSTRUCTIONS

BEFORE USE

WARNING! Remove any labels from the soleplate before heating up the iron.

EN

WARNING! Before using your iron with the steam function for the first time, we recommend that you operate it in a horizontal position for a few moments, away from your linen, i.e. press the Shot of Steam button a few times.

Upon the first use, you may notice small particles coming out of the soleplate. This is part of manufacturing process and is not harmful to you or your garments. It will disappear after several uses. You may accelerate this by using the self cleaning function (fig 5a - 5b) and shaking the iron gently.

1. What water may be used?

Your iron has been designed to operate using untreated tap water. If in doubt, check with your local water authority. However, if your water is very hard, you can mix 50% untreated tap water with 50% distilled or demineralised water.

IMPORTANT Heat concentrates the elements contained in water during evaporation. The types of water listed below contain organic waste or mineral elements that can cause spitting, brown staining or premature wear of the appliance : water from clothes dryers, scented or softened water, water from refrigerators, batteries or air conditioners, pure distilled or demineralised water or rain water should not be used in your iron. Also do not use boiled, filtered or bottled water.

IRONING BOARD: Due to the powerful steam output, a mesh type ironing board must be used to allow any excess steam to escape and to avoid steam venting sideways.

USE

2 • Filling the water tank

IMPORTANT Before filling the water tank, unplug the iron and set the steam control to dry position.

Tilt the iron. Open the filling inlet (fig.6). Pour in water up to the max mark (fig.7). Close the filler inlet (fig.8) and return the iron to the horizontal.

3 • Temperature and steam adjustment

Set the iron temperature to suit the type of material using the temperature control dial (fig.3).

• depending on model

Temperature control*: The temperature control light indicates that the soleplate is heating up. When the temperature control light goes off (fig.10), the set temperature is reached and you can begin ironing.

	ECO STEAM
	Cotton linen		···	III BOOST/ECO
	Silk, wool		···	III ECO
	Nylon		·	※

IMPORTANT The iron takes longer to cool down than to heat up. We recommend that you start with fabrics to be ironed at a low temperature. For mixed fabrics set the temperature for the most delicate fabric.

TIP Always spray starch onto the reverse side of the fabric to be ironed.

4 • Dry ironing

Set the variable steam control to DRY (fig.11) and set the temperature to suit the type of material (care points , , ).

5·Eco steam system

Your Steam Iron is equipped with the Eco Steam System. This function offers 3 steam settings for optimal ironing:

• DRY position: For an ironing without steam, ideal for delicates or perfect finishes.
• ECO position: For an optimized ironing with a steam output perfectly adapted to all fabric types. This setting ensures qualitative ironing results while saving energy.
• BOOST position: For increased variable steam output to reach perfect result on thickest fabrics.

6·Shot of steam

(from temperature setting · · upwards)

Press the shot of steam button to generate a powerful jet of steam (fig.16).

Wait a few seconds between each shot before pressing the button again.

7 · Vertical shot of steam

(from temperature setting · · upwards)

TIP Hold the iron 10 to 20 centimetres away from the garment to avoid burning delicate fabrics.

Hold the iron to the vertical and press the shot of steam button ( fig.17) to remove creases from suits, jackets, skirts, hanging curtains etc.

Wait a few seconds between each shot before pressing the button again.

IMPORTANT Never direct the steam at persons or animals!

8·Spray

Press the spray button to dampen stubborn creases (fig.18).

9·Anti-Drip system*

This prevents water escaping from the soleplate when the temperature is too low.

10 • Automatic electronic 3-position cut-out*

If, although switched on, the appliance is not moved, it will automatically switch off and the auto off light will blink after the following intervals:

• After 30 sec., if the iron is left resting on the the soleplate or lying on its side.

• After 8 mins., if the iron is left resting on its heel.

To switch the iron back on, move the iron gently.

AFTER USE

11·Emptying

Unplug the iron (fig.4), pour away remaining water (fig.20) and set steam control to x D R Y

Open and close the steam control several times (fig.16) to prevent the valve hole into the steam chamber from scaling or blocking up.

12 • Storing

Allow the appliance to cool down before storing the iron standing on its heel (fig.21).

IMPORTANT Do not wind the cord around the hot soleplate. Never store your iron placed down on the soleplate.

MAINTENANCE AND CLEANING

IMPORTANT Unplug and allow the iron to fully cool down before maintenance and cleaning.

13·Anti-scale system

Your iron contains an anti-scale cartridge to reduce scale deposits. This considerably prolongs the operational life of your iron.

The anti-scale cartridge is an integral part of the water tank and does not need to be replaced.

14 • Self Clean function

(prolongsthe lifeoftheiron)

The Self Clean function flushes dirt and scale particles out of the steam chamber.

IMPORTANT Do not use descending agents, as these damage the lining of the steam chamber and so may impair the steam function.

Fill the water tank with untreated tap water up to the max mark and heat the iron to the temperature. Unplug the iron and hold it over a sink horizontally. Hold the steam control into the Self Clean position (fig.5a-5b) and shake the iron gently : steam will now begin to build up. After a few seconds water will emerge from the soleplate, rinsing dirt and scale particles out of the steam chamber.

• depending on model

Move the steam control to DRY position after approx. 1 minute.

Plug in the iron and allow the iron to heat up again. Wait until the remaining water has evaporated. Unplug from the mains and allow the iron to fully cool down.

When cool, the soleplate can be wiped with a damp cloth.

TIP Use the Self Clean function approx. every 2 weeks. If the water is very hard, clean the iron weekly.

15 · Cleaning the iron

When the appliance has cooled down, wipe it down with a damp cloth or sponge, as required.

Remove the dirt from the soleplate with a damp cloth or sponge.

IMPORTANT Do not use sharp or abrasive cleaning agents or objects to clean soleplate and other parts of the iron.

If the appliance has been standing unused for long periods, use the Self Clean function (see § 14).

PROBLEMS?

Problems	Cause	Solution
The iron is plugged in, but the soleplate of the iron remains cold.	No mains supply.	Check that the mains plug is properly inserted or try plugging the iron into a different socket.
	Temperature control set too low.	Set the temperature control to a higher temperature.
	The automatic electronic cut-out* is active.	Move your iron.
	Steam control set on dry position DRY.	Turn the steam control to the required setting area.
	Not enough water in the water tank.	Fill the water tank.
	Anti-Drip* is active (§ 11).	Wait for the soleplate to reach the correct temperature.
Brown streaks come through the holes inthe soleplate and stain the linen.	Residues in the steam chamber or on the soleplate.	Use the Self Clean function then clean your iron.
	Use of chemical descaling agents.	Do not add any descaling agents to the water in the water tank. Use the Self Clean function and clean your iron.
	Fabric fibres have accumulated in the holes of the soleplate and are burning.	Clean the soleplate with a non-metallic sponge. Vacuum the holes of the soleplate from time to time.
	Your linen is not rinsed sufficiently or you have ironed a new garment before washing it.	Ensure linen is rinsed thoroughly to remove any soap deposits or chemicals on new garments which may be sucked by the iron.
	Use of starch.	Always spray starch onto the reverse side of the fabric to be ironed and clean your iron soleplate.
	Pure distilled / demineralised or softened water is being used.	Only use untreated tap water or mix half tap water with half distilled/demineralised water. Use the Self Clean function and clean your iron.
Iron is leaking.	Overuse of shot of steam button.	Allow more time between each shot.
	Soleplate temperature too low.	Set the temperature control to a higher temperature.

If you have any product problems or queries please contact our Customer Relations Team first for expert help and advice:
0845 602 1454 - UK [phone] - Ireland or consult our wesbite - www(rowenta.co.uk

Subject to modifications!

• depending on model

BESCHRIJVING VAN HET APPARAAT

1 Sproeiopening
2 Vulopening met schuifknop
3 Eco steam system

CTapOMoHeThbI Nep. d.14 cTp.2

01 866 70 299 00

2 Jahre

BOSNAI

HERCEGOVINA

SEB DÉveloppement

Retailer name & address:

/ Nom et adresse du vendeur / Nombre y direccion del minorista / Nome e endereço do revendedor / Nome e indirizzo delnegozio / Name und Anschrift des Handlers / Naam en adres van de dealer / Forhandler navn & adresse / Àterförsäljarens namn och adress / Forhandler navn og adresse / Jällenmyyjän nimi ja osoite / nazwa i adres sprzedawcy / Numele Şi adresa vanzatorului / Parduotuvès pavadinimas ir adresas / Müüja kauplus ja aadress / Naziv in naslov trgovine / Tipusszám / Názov a adresa predajcu / Veikala nosaukums un adrese / Naziv i adresa maloprodaje / Naziv i adresa prodavca / Naziv i adresa prodajnog mjesta / Nume Şi adresa vanzător / Název a adresa prodejce / Nama dan alamat peruncit / Nama Toko Penjual dan alamat / Tên va dja chi cira häng bàn/ Satici firmanin adi ve adresi / HañBaHneи ἀπες προДавца / HañBa i ἀπες προДавцa / TþrɒBKN ΜeBERT / HañNBи ἀπεCaHa προДавицаТa/CatUmbiHnA tbyxmbiHnA tbyxHe MeKeH-xaHbI/ Eπωνμia Kαι διεθυνηκαταστήματος / quxduunnnh uuiuununu huuugbu/ 10000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

Distributor stamp. /Cachet distributor /Sello del distribuidor / Carimbo do revendedor / Timbro del negotzzio / Händlerstempel / Stempel van de dealer / Forhandler stempel / Återförsäljarens stämpel / Forhandler stempel / Jällenmyyjän leima / piecęć sprzedawcy / Štampila vanzātorului / Antspaudas / Tempel / Zig trgovine / Eladó neve, cîme/ Razítko predajcu / Zīmogs / Pečat maloprodaje/ Pečat prodavca / Pečat prodajnog mjesta / Štampila vanzātorului/ Razítko prodejce/ Cap peruncit / Cap dari Toko Penjual / Cúra hang bàn dong dáu/ Satici Firmanin Kasesi / Пechтлprodkа / Пechтka prodkуя / Пechт на тьрвсия обekt / Пechт на пroduвицета / Catушиньн мөрì / Σрайдддддддддддддддддддддддддддддддддддддддддддддддддддддддддддддддддддддддддддддддддддддддддддддддддддд徴/零售商的蓋印/贩壳店印/敞甲醛制职在/鱼子鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼鱼