55EC930V - OLED TV LG - Free user manual and instructions

USER MANUAL 55EC930V LG

LG LED TVs are LCD TVs with LED backlighting. Click! User Guide Please read this manual carefully before operating your set and retain it for future reference. UB85** UB93** UB95** UB98** UC97** *MFL68066604* www.lg.com P/NO : MFL68066604 (1408-REV04) Printed in Korea A-2

A-3 SETTING UP THE TV

A-3 Attaching the stand A-8 Tidyng cables A-10 Assembling the AV cover

Image shown may differ from your TV. Attaching the stand UB85**-ZA, UB93**, UB95**-ZA

Stand Base 1 Attach the stand to the TV using the upper mounting hole on the back of the TV. 2 Attach the stand to the TV using the lower connection on the back of the TV. M4 x L20 4EA

1 Attach the stand to the TV using the upper mounting hole on the back of the TV. 2 Attach the stand to the TV using the lower connection on the back of the TV.

4EA M4 x L10 NOTE y Be sure to check the Stand Body (L), (R), when installing on the stand base. M4 x L20 4EA

Wrench Stand Base 4EA

4EA (Insulation Holder) A-6

CAUTION y Make sure that the screws are inserted correctly and fastened securely. (If they are not fastened securely enough, the TV may tilt forward after being installed.) 98UB98**

Mold M6 x L47 6EA NOTE y The stand screws are already attached at the back of the TV. Please use these attached screw to assemble the TV and stand. (Only 98UB98**)

1 When assembling the stand, lay the front screen protective package included in the product box on a table or flat surface and then place the TV screen face down on the protective package. 2 Attach the stand to the TV using the upper mounting hole on the back of the TV. 3 Attach the stand to the TV using the lower connection on the back of the TV. A-8

Image shown may differ from your TV. 1 Gather and bind the cables with the Cable Holder and the Cable Management. 2 Fix the Cable Management firmly to the TV. (Only UB85**-ZA, UB93**, UB95**-ZA) M4 x L20 4EA Cable Holder CAUTION y When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. (Only UB85**, UB93**, UB95**, UB98**) y Make sure that the screws are inserted correctly and fastened securely. (If they are not fastened securely enough, the TV may tilt forward after being installed.) Do not use too much force and over tighten the screws; otherwise screw may be damaged and not tighten correctly. Cable management (Only UB85**-ZD, UB95**-ZB) NOTE y Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse. y Remove the protective film from the stand base and then attach the stand body to the stand base. (Only UC97**) Cable Holder Cable management

(Only UC97**) A-9 1 Gather and bind the cables with the Cable Holder. (Only 65/79/84UB98**) Cable Holder Cable Holder Cable management (Only 98UB98**) CAUTION y Do not move the TV by holding the cable holders, as the cable holders may break, and injuries and damage to the TV may occur. Cable management Cable Holder Cable management A-10

SETTING UP THE TV / MAKING CONNECTIONS

Assembling the AV cover (Only 98UB98**) 1 Insert the cover holder attached to the AV port cover into the hole of the main body of the product as illustrated. 2 Attach the port cover onto the AV port part. (The cover remains attached through the use of a magnet.) MAKING CONNECTIONS This section on MAKING CONNECTIONS mainly uses diagrams for the UB85** models. Antenna Connection

(*Not Provided) ANTENNA / CABLE Wall Antenna Socket Cover Holder English Connect the TV to a wall antenna socket with an RF FDEOH Ÿ

1) HDMI specifications may be different for each input

port, so make sure to check the device specifications before connecting.

2) The HDMI IN 3 port is especially suitable for the

specifications to enjoy UHD Video (4:4:4, 4:2:2) of 4K @ 50/60 Hz. However, video or audio may not be supported depending on the specifications of the external equipment. In that case, use any other HDMI IN port.

3) Contact customer service for more information on

the HDMI specifications of each input port. 4K @ 50/60 Hz Support Format Resolution Frame rate (Hz) Colour Depth / Chroma Sampling 8 bit YCbCr 4:2:0 3840 x 2160p 4096 x 2160p

ODKNRUD]OLNXMHMR]DWRMLKSUHYHULWHSUHGSULNOMXþLWYLMR

transmitting digital audiovisual signals from mobile phones to television sets. NOTE y Connect the mobile phone to the HDMI(4K @ 60 Hz)/DVI IN 4(MHL) port to view the phone screen on the TV. y The MHL passive cable is needed to connect the TV and a mobile phone. y This only works for the MHL-enabled phone. y Some applications can be operated by the remote control. y For some mobile phones supporting MHL, you can control with the magic remote control. y Remove the MHL passive cable from the TV when: » the MHL function is disabled » your mobile device is fully charged in standby mode MAKING CONNECTIONS Deutsch

LG LED TVs are LCD TVs with LED backlighting. Click! User Guide Please read this manual carefully before operating your set and retain it for future reference. www.lg.com

How to use Magic Remote

Precautions to Take when Using the Magic Remote

- Viewing 3D Imaging (Only 3D models)

ASSEMBLING AND PREPARING

Lifting and moving the TV

Using Built-in Camera

- Preparing Built-in Camera

- Name of Parts of Built-in Camera

SPECIFICATIONS WARNING y If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death. CAUTION y If you ignore the caution message, you may be slightly injured or the product may be damaged. NOTE y The note helps you understand and use the product safely. Please read the note carefully before using the product. LICENSES / OPEN SOURCE SOFTWARE NOTICE / EXTERNAL CONTROL DEVICE SETUP

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the product.

EXTERNAL CONTROL DEVICE SETUP

To obtain the external control device setup information, please visit www.lg.com. ENGLISH ENG LICENSES

SAFETY INSTRUCTIONS ENGLISH ENG SAFETY INSTRUCTIONS Please read these safety precautions carefully before using the product. WARNING y Do not place the TV and/or remote control in the following environments: - A location exposed to direct sunlight - An area with high humidity such as a bathroom - Near any heat source such as stoves and other devices that produce heat - Near kitchen counters or humidifiers where they can easily be exposed to steam or oil - An area exposed to rain or wind - Near containers of water such as vases

2WKHUZLVHWKLVPD\UHVXOWLQ¿UHHOHFWULFVKRFNPDOIXQFWLRQRUSURGXFWGHIRUPDWLRQ

y Do not place the product where it might be exposed to dust. This may cause a fire hazard. y Mains Plug is the TV connecting/disconnecting device to AC mains electric supply. This plug must remain readily attached and operable when TV is in use. y Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off. You may be electrocuted due to excess moisture. y Make sure to connect Mains cable to compliant AC mains socket with Grounded earth pin. (Except for devices which are not grounded on earth.) Otherwise possibility you may be electrocuted or injured. y Insert power cable plug completely into wall socket otherwise if not secured completely into socket, fire ignition may break out. y Ensure the power cord does not come into contact with hot objects such as a heater. This may cause a fire or an electric shock hazard. y Do not place a heavy object, or the product itself, on power cables. Otherwise, this may result in fire or electric shock. SAFETY INSTRUCTIONS y When mounting TV onto wall make sure to neatly install and isolate cabling from rear of TV as to not create possibility of electric shock/fire hazard. y Do not plug too many electrical devices into a single multiple electrical outlet. Otherwise, this may result in fire due to over-heating. y Do not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product. Desic cant y Keep the anti-moisture packing material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children. y Do not let your children climb or cling onto the TV. Otherwise, the TV may fall over, which may cause serious injury. y Dispose of used batteries carefully to ensure that a small child does not consume them. Please seek Doctor- Medical Attention immediately if child consumes batteries. y Do not insert any metal objects/conductors (like a metal chopstick/cutlery/screwdriver) between power cable plug and input Wall Socket while it is connected to the input terminal on the wall. Additionally, do not touch the power cable right after plugging into the wall input terminal. You may be electrocuted. (Depending on model) y Do not put or store inflammable substances near the product. There is a danger of combustion/explosion or fire due to careless handling of the inflammable substances. y Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inflammable objects such as paper and matches. Children must pay particular attention. Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and contact the service centre. ENGLISH ENG y Bend antenna cable between inside and outside building to prevent rain from flowing in. This may cause water damaged inside the Product and could give an electric shock.

SAFETY INSTRUCTIONS ENGLISH ENG y Do not spray water on the product or scrub with an inflammable substance (thinner or benzene). Fire or electric shock accident can occur. y Do not allow any impact, shock or any objects to fall into the unit, and do not drop anything onto the screen. You may be injured or the product can be damaged. y Never touch this product or antenna during a thunder or lighting storm. You may be electrocuted. y Never touch the wall outlet when there is leakage of gas, open the windows and ventilate. It may cause a fire or a burn by a spark. y Do not disassemble, repair or modify the product at your own discretion. Fire or electric shock accident can occur. Contact the service centre for check, calibration or repair. y If any of the following occur, unplug the product immediately and contact your local service centre. - The product has been impacted by shock - The product has been damaged - Foreign objects have entered the product - The product produced smoke or a strange smell This may result in fire or electric shock. y Unplug the TV from AC mains wall socket if you do not intend to use the TV for a long period of time. Accumulated dust can cause fire hazard and insulation deterioration can cause electric leakage/shock/fire. y Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. y Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall. SAFETY INSTRUCTIONS y Install the product where no radio wave occurs. y There should be enough distance between an outside antenna and power lines to keep the former from touching the latter even when the antenna falls. This may cause an electric shock. y Do not install the product on places such as unstable shelves or inclined surfaces. Also avoid places where there is vibration or where the product cannot be fully supported. Otherwise, the product may fall or flip over, which may cause injury or damage to the product. y If you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury. y If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop. y Only use the attachments / accessories specified by the manufacturer. y When installing the antenna, consult with a qualified service technician. If not installed by a qualified technician, this may create a fire hazard or an electric shock hazard. y We recommend that you maintain a distance of at least 2 to 7 times the diagonal screen size when watching TV. If you watch TV for a long period of time, this may cause blurred vision. y Only use the specified type of battery. This could cause damage to the remote control. y Do not mix new batteries with old batteries. This may cause the batteries to overheat and leak. y Batteries should not be exposed to excessive heat. For example, keep away from direct sunlight, open fireplace and electric heaters . y Do not place non-rechargeable batteries in charging device. ENGLISH ENG CAUTION

SAFETY INSTRUCTIONS ENGLISH ENG y Make sure there are no objects between the remote control and its sensor. y Signal from Remote Control can be interrupted due to external/internal lighting eg Sunlight, fluorescent lighting. If this occurs turn off lighting or darken viewing area. y When connecting external devices such as video game consoles, make sure the connecting cables are long enough. Otherwise, the product may fall over, which may cause injury or damage the product. y Do not turn the product On/Off by plugging-in or unplugging the power plug to the wall outlet. (Do not use the power plug for switch.) It may cause mechanical failure or could give an electric shock. y Please follow the installation instructions below to prevent the product from overheating. - The distance between the product and the wall should be more than 10 cm. - Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a cupboard). - Do not install the product on a carpet or cushion. - Make sure the air vent is not blocked by a tablecloth or curtain. Otherwise, this may result in fire. y Take care not to touch the ventilation openings when watching the TV for long periods as the ventilation openings may become hot. This does not affect the operation or performance of the product. y Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. y Prevent dust collecting on the power plug pins or outlet. This may cause a fire hazard. y Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. y Do not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it, as it may cause damage to screen. SAFETY INSTRUCTIONS y When cleaning the product and its components, unplug the power first and wipe it with a soft cloth. Applying excessive force may cause scratches or discolouration. Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the product and its panel. Otherwise, this may result in fire, electric shock or product damage (deformation, corrosion or breakage). y As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by SWITCH. y When unplugging the cable, grab the plug and unplug it, by pulling at the plug. Don’t pull at the cord to unplug the power cord from the power board, as this could be hazardous. y When moving the product, make sure you turn the power off first. Then, unplug the power cables, antenna cables and all connecting cables. The TV set or power cord may be damaged, which may create a fire hazard or cause electric shock. y When moving or unpacking the product, work in pairs because the product is heavy. Otherwise, this may result in injury. y Contact the service centre once a year to clean the internal parts of the product. Accumulated dust can cause mechanical failure. y Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. y If the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with product. y The panel is a high technology display product with resolution of two million to six million pixels. You may see tiny black dots and/or brightly coloured dots (red, blue or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not affect the performance and reliability of the product. This phenomenon also occurs in third-party products and is not subject to exchange or refund. ENGLISH ENG y Avoid touching the screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary or permanent distortion/damage to screen.

SAFETY INSTRUCTIONS ENGLISH ENG y You may find different brightness and colour of the panel depending on your viewing position(left/right/top/down). This phenomenon occurs due to the characteristic of the panel. It is not related with the product performance, and it is not malfunction. y Displaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video game) for a prolonged time may cause damage to the screen, resulting in retention of the image, which is known as image sticking. The warranty does not cover the product for image sticking. Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours for LCD, 1 or more hours for Plasma). Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of the panel. This phenomenon also occurs in third-party products and is not subject to exchange or refund. y Generated Sound “Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to tempera-ture and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a highspeed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product. This generated sound does not affect the performance and reliability of the product. y Do not use high voltage electrical goods near the TV (e.g. electric mosquito-swatter). This may result in product malfunction. SAFETY INSTRUCTIONS

WARNING Viewing Environment y Viewing Time - When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain. Those that have a photosensitive seizure or chronic illness y Some users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D contents. y Do not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as epilepsy, cardiac disorder, or blood pressure disease, etc. y 3D Contents are not recommended to those who suffer from stereo blindness or stereo anomaly. Double images or discomfort in viewing may be experienced. y If you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have trouble sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than the average adult. y If your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D contents. Symptoms which require discontinuation or refraining from watching 3D contents y Do not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking. y When these symptoms are experienced, stop using/watching 3D contents and get enough rest until the symptom subsides. - Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain, dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue. ENGLISH ENG Viewing 3D Imaging (Only 3D models)

SAFETY INSTRUCTIONS ENGLISH ENG CAUTION Viewing Environment y Viewing Distance - Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV. Viewing Age y Infants/Children - Usage/ Viewing 3D contents for children under the age of 6 are prohibited. - Children under the age of 10 may overreact and become overly excited because their vision is in development (for example: trying to touch the screen or trying to jump into it. Special monitoring and extra attention is required for children watching 3D contents. - Children have greater binocular disparity of 3D presentations than adults because the distance between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic depth compared to adults for the same 3D image. y Teenagers - Teenagers under the age of 19 may react with sensitivity due to stimulation from light in 3D contents. Advise them to refrain from watching 3D contens for a long time when they are tired. y Elderly - The elderly may perceive less 3D effect compared to the youth. Do not sit closer to the TV than the recommended distance. Cautions when using the 3D glasses

Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly. Do not use 3D glasses instead of your normal glasses, sunglasses or protective goggles. Using modified 3D glasses may cause eye strain or image distortion. Do not keep your 3D glasses in extremely high or low temperatures. It will cause deformation. The 3D glasses are fragile and are easily scratched. Always use a soft, clean piece of cloth when wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with chemicals.

Image shown may differ from your TV. Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. The available menus and options may differ from the input source or product model that you are using. New features may be added to this TV in the future. The TV can be placed in standby mode in order to reduce the power consumption. And the TV should be turned off if it will not be watched for some time, as this will reduce energy consumption. y The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost. INSTALLATION PROCEDURE

Open the package and make sure all the accessories are included. Attach the stand to the TV set. Connect an external device to the TV set. Make sure the network connection is available. You can use the TV network functions only when the network connection is made.

• If the TV is turned on for the first time after it was shipped from the factory, initialization of the TV may take a few minutes.

ASSEMBLING AND PREPARING

Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item. CAUTION y Do not use any unapproved items to ensure the safety and product life span. y Any damages or injuries by using unapproved items are not covered by the warranty. y Some models have a thin film attached on to the screen and this must not be removed. NOTE y The items supplied with your product may vary depending on the model. y Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions. y For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port.

ASSEMBLING AND PREPARING

ENGLISH ENG NOTE How to use the ferrite core (Depending on model) y Use the ferrite core to reduce the electromagnetic interference in the LAN cable. Wind the LAN cable once on the ferrite core. Place the ferrite core close to the TV. [Cross Section of Ferrite Core] [to the TV] [to an External device] Ferrite core

ASSEMBLING AND PREPARING

ENGLISH ENG Tag On Remote Control, Batteries (AAA) (Depending on model) The remote control will not be included for all sales market. (See p. 27, 28) Magic remote, batteries (AA) (Only UB85**, UB93**, UB95**, UB98**, UC97**) (See p. 29) Owner’s manual Tag on (Depending on model) Power Cord (Depending on model) Cable holder (Depending on model) (See p. A-8, A-9) Cinema 3D Glasses The number of 3D glasses may differ depending on the model or country. (Only UB85**, UB95**, UB98**, UC97**) Video call camera (Depending on model) Component gender cable (See p. A-21) Composite gender cable (See p. A-21, A-23) Scart gender cable (Depending on model) (See p. A-36) HDMI cable (Depending on model) (See p. A-13) Stand Body / Stand Base (Only UB85**-ZA, UB93**, UB95**-ZA) (See p. A-3) Stand Body / Stand Base (Only UB85**-ZD, UB95**-ZB) (See p. A-4) Stand Base (Only 65/79/84UB98**) (See p. A-5) Stand Base (Only 98UB98**) (See p. A-7)

ASSEMBLING AND PREPARING

ENGLISH ENG Stand Body / Stand Base (Only UC97**) (See p. A-7, A-8) Stand Screws 8EA, M4 x L20 (Only UB85**-ZA, UB93**, UB95**-ZA) 4EA, M4 x L20 (Only UB85**-ZD, UB95**-ZB, UC97**) (See p. A-3, A-4, A-8) Stand Screws 4EA, M4 x L10 (Only UB85**-ZD, UB95**-ZB, UC97**) (See p. A-4, A-7) Stand Screws 4EA, M6 x L47 (Only 65UB98**) (See p. A-5) Stand Screws 4EA, M6 x L52 (Only 79/84UB98**) (See p. A-5) Ferrite core (Depending on model) Cable Managements 2EA (Only UB85**-ZA, UB93**, UB95**-ZA) (See p. A-8) Cable Managements 2EA (Only UB85**-ZD, UB95**-ZB, UC97**) (See p. A-8, A-9) Cable Management 1EA (Only 98UB98**) (See p. A-9) Cable Management 1EA (Only 98UB98**) (See p. A-9) Wrench (Only UB98**) (See p. A-5, A-6, A-7) Insulation Holders 4EA (Only 84UB98**) (See p. A-5) Wall Mount Inner Spacers 4EA (Only UC97**) (See p. 24) AV Port Cover / Screw 1EA, M3 x L8 (Only 98UB98**) (See p. A-10)

ASSEMBLING AND PREPARING

ENGLISH ENG Separate purchase

2SWLRQDOH[WUDVFDQEHFKDQJHGRUPRGL¿HGIRUTXDOLW\LPSURYHPHQWZLWKRXWDQ\QRWL¿FDWLRQ

Contact your dealer for buying these items. These devices only work with certain models. AG-F***DP Dual play glasses AG-F*** Cinema 3D glasses LG Audio Device Tag on Compatibility UB85**, UB95**, UC97** AN-MR500 Magic Remote AN-VC5** Video call camera UB93**

UB98** AG-F***DP Dual play glasses

AG-F*** Cinema 3D glasses

The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies.

ASSEMBLING AND PREPARING

ENGLISH ENG Parts and buttons B type : UB85**-ZD A type : UB85**-ZA Screen Screen Speakers Speakers Remote control and Intelligent1 sensors Power Indicator Joystick Button2 Remote control and Intelligent1 sensors Power Indicator D type : UB95**-ZB C type : UB93**, UB95**-ZA Screen Screen Speakers Speakers Remote control and Intelligent1 sensors LG Logo light Joystick Button2 Joystick Button3 Remote control and Intelligent1 sensors LG Logo light Joystick Button3

ASSEMBLING AND PREPARING

Remote control and Intelligent1 sensors LG Logo light Joystick Button3 H type : UC97** Built-in camera Screen Screen Speakers Remote control and Intelligent1 sensors LG Logo light Sliding Speaker Joystick Button3 Remote control and Intelligent1 sensors LG Logo light Joystick Button2 ENGLISH ENG Built-in camera Built-in camera Remote control and Intelligent1 sensors LG Logo light

ASSEMBLING AND PREPARING

ENGLISH ENG 1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment. 2 Joystick Button - This button is located behind the TV screen. 3 Joystick Button - This button is located below the TV screen. NOTE y You can set the LG Logo Light or power indicator light to on or off by selecting General in the main menus. (Depending on model) Using the joystick button You can operate the TV by pressing the button or moving the joystick left, right, up, or down. Basic Functions Power On

:KHQWKH79LVWXUQHGRIISODFH\RXU¿QJHURQWKHMR\VWLFNEXWWRQDQG

press it once and release it. Power Off

:KHQWKH79LVWXUQHGRQSODFH\RXU¿QJHURQWKHMR\VWLFNEXWWRQDQG

press it once for a few seconds and release it. Volume Control

,I\RXSODFH\RXU¿QJHURYHUWKHMR\VWLFNEXWWRQDQGPRYHLWOHIWRU

right, you can adjust the volume level you want. Programmes Control

,I\RXSODFH\RXU¿QJHURYHUWKHMR\VWLFNEXWWRQDQGSXVKLWWRWKHXS

or down, you can scrolls through the saved programmes what you want. NOTE y When your finger over the joystick button and push it to the up, down, left or right, be careful not to press the joystick button. If you press the joystick button first, you may not be able to adjust the volume level and saved programmes. Adjusting the Menu When the TV is turned on, press the joystick button one time. You can adjust the Menu items (

) moving the joystick button left or right. TV OFF Turns the power off. CLOSE Clears on-screen displays and returns to TV viewing. INPUT Changes the input source.

ASSEMBLING AND PREPARING

Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. y When transporting a large TV, there should be at least 2 people. y When transporting the TV by hand, hold the TV as shown in the following illustration. CAUTION y Avoid touching the screen at all times, as this may result in damage to the screen. y It is recommended to move the TV in the box or packing material that the TV originally came in. y Before moving or lifting the TV, disconnect the power cord and all cables. y When holding the TV, the screen should face away from you to avoid damage. y When transporting the TV, do not expose the TV to jolts or excessive vibration. y When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right. y Do not apply excessive pressure to cause flexing / bending of frame chassis as it may damage screen. Mounting on a table y Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area. 1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (minimum) space from the wall for proper ventilation. 10 cm 10 cm

10 c 10 cm 2 Connect the power cord to a wall outlet. CAUTION y Do not place the TV near or on sources of heat, as this may result in fire or other damage. ENGLISH ENG Lifting and moving the TV

ASSEMBLING AND PREPARING

Using the Kensington security system ENGLISH ENG (This feature is not available for all models.) y Image shown may differ from your TV. Securing the TV to a wall (This feature is not available for all models.) The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www. kensington.com. (Only 105UC9*) (Only 98UB98**) Connect the Kensington security system cable between the TV and a table. 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. - If there are bolts inserted at the eye-bolts position, remove the bolts first. 2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eyebolts on the rear of the TV. 3 Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface. CAUTION y Make sure that children do not climb on or hang on the TV. NOTE y Use a platform or cabinet that is strong and large enough to support the TV securely. y Brackets, bolts and ropes are not provided. You can obtain additional accessories from your local dealer.

ASSEMBLING AND PREPARING

Wall mount bracket 10 cm 10 cm 10 cm 10 cm Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table. Separate purchase (Wall Mounting Bracket) Model 49/55UB85** 55UB95** 55UC97** VESA (A x B) Standard screw Number of screws 400 x 400

LSW440B LSW440B MSW240

LSW640B ENGLISH ENG Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a

VROLGZDOOSHUSHQGLFXODUWRWKHÀRRU:KHQ\RXDWWDFK

the TV to other building materials, please contact quali¿HGSHUVRQQHO LG recommends that wall mounting be performed by a TXDOL¿HGSURIHVVLRQDOLQVWDOOHU We recommend the use of LG’s wall mount bracket. When you do not use LG’s wall mount bracket, please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices.

ASSEMBLING AND PREPARING

ENGLISH ENG Sliding speaker CAUTION y Disconnect the power first, and then move or install the TV. Otherwise electric shock may occur. y If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. y Do not over tighten the screws as this may cause damage to the TV and void your warranty. y Use the screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty. (Only 98UB98**) Sliding speaker NOTE y Use the screws that are listed on the VESA standard screw specifications. y The wall mount kit includes an installation manual and necessary parts. y The wall mount bracket is not provided. You can obtain additional accessories from your local dealer. y The length of screws may differ depending on the wall mount. Make sure to use the proper length. y For more information, refer to the manual supplied with the wall mount. y When attaching a third-party wall mounting bracket to the TV, insert the wall mount inner spacers into the TV wall mount holes to move your TV in vertical angle. Please make sure not to use the spacers for LG wall mounting bracket. (Only UC97**) Wall Mount Inner Spacer 1 When TV is turned ON - the hidden speaker slides out from inside the TV. 2 Go to Settings঎ Sound঎ Sound Out ঎Sliding speaker to set Sliding Speaker. - Please Do Not use excessive force during operation of internal sliding Speaker as it may cause it to malfunction. - Make sure Speaker is in OPEN position when viewing TV as sound will be abnormal or distorted. 3 When transporting the TV, make sure that the Sliding Speaker is closed. If the Sliding Speaker is open when being transported, it may become damaged, resulting in malfunction. - To close the Sliding Speaker, go to Sound঎ Sound Out ঎Sliding speaker, select 'Opens when TV is turned on' and press the POWER button.

ASSEMBLING AND PREPARING

y When the Sliding speaker is operating (when the TV is turned on/off), ensure that children do not put their hands near the operating part of the speaker (at the bottom of the TV) and that they do not crawl into the space below the TV. - Their hands may get caught and injured due to the operation of the speaker. Using Built-in Camera (Only UB98**) You can make a Skype video call or use the motion recognition function using the built-in camera of the TV. This TV does not support the use of an external camera. NOTE y Do not store objects below the TV. - This may cause a problem in the operating part of the speaker. y Before using the built-in camera, you must recognize the fact that you are legally responsible for the use or misuse of the camera by the relevant national laws including the criminal law. y The relevant laws include the Personal Information Protection law which regulates the processing and transferring of personal information and the law which regulates the monitoring by camera in a workplace and other places. y When using the built-in camera, avoid questionable, illegal, or immoral situations. Other than at public places or events, consent to be photographed may be required. We suggest avoiding the following situations : (1) Using the camera in areas where the use of camera is generally prohibited such as restroom, locker room, fitting room and security area. (2) Using the camera while causing the infringement of privacy. (3) Using the camera while causing the violation of the relevant regulations or laws. ENGLISH ENG CAUTION

ASSEMBLING AND PREPARING

3 Push down the built-in camera when you are not using it. Preparing Built-in Camera ENGLISH ENG (This feature is not available for all models.) 1 Pull up the slide at the back of the TV. Angle Adjustment Lever Slide Name of Parts of Built-in Camera Protective Film Camera Lens Microphone NOTE y Remove the protective film before using the builtin camera. 2 You can adjust the angle of the camera with the angle adjustment lever on the back of the built-in camera. <Side View> (Only 65/79/84UB98**) Lever

Lens (Only 98UB98**) Lever Lens Microphone Checking the Camera’s Shooting Range 1 Press the (Home) button to access the Home menu. Camera and then press the Wheel(OK) 2 Select button. NOTE y The optimal distance from the camera to use the motion recognition function is between 1.5 m and

The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse.

CAUTION y Do not mix old and new batteries, as this may damage the remote control. y The remote control will not be included for all sales market. Make sure to point the remote control toward the remote control sensor on the TV. (Depending on model) INPUT Q.MENU SETTINGS

(POWER) Turns the TV on or off. INPUT Changes the input source. Q. MENU Accesses the quick menus. SETTINGS Accesses the main menus. INFO Views the information of the current programme and screen. (User Guide) Sees User Guide. Q.VIEW GUIDE Shows programme guide. (Space) Opens an empty space on the screen keyboard. Q.VIEW Returns to the previously viewed programme. FAV Accesses your favourite programme list. Uses for viewing 3D video. (Depending on model) MUTE Mutes all sounds. - Adjusts the volume level. 廞P廟Scrolls through the saved programmes. PAGE Moves to the previous or next screen. FAV

RECENT Shows the previous history. SMART Accesses the Home menus. MY APPS Shows the list of Apps. Navigation buttons (up/down/left/right) Scrolls through menus or options.

OK 6HOHFWVPHQXVRURSWLRQVDQGFRQ¿UPV\RXULQSXW

BACK Returns to the previous level. LIVE MENU Shows the list of Recommended, Programmes, Search and Recorded. EXIT Clears all on-screen display and returns to TV viewing.

REC/ (POWER) Turns the TV on or off. TV/RAD Selects Radio, TV and DTV programme. INPUT Changes the input source. SETTINGS Accesses the main menus. Q. MENU Accesses the quick menus. INFO Views the information of the current programme and screen. SUBTITLE Recalls your preferred subtitle in digital mode. GUIDE Shows programme guide. (Space) Opens an empty space on the screen keyboard. Q.VIEW Returns to the previously viewed programme. FAV Accesses your favourite programme list. Uses for viewing 3D video. (Depending on model) MUTE Mutes all sounds. - Adjusts the volume level. 廞P廟Scrolls through the saved programmes. 廞PAGE廟 Moves to the previous or next screen. RECENT Shows the previous history. SMART Accesses the Home menus. LIVE MENU Shows the list of Recommended, Programmes, Search and Recorded. TELETEXT BUTTONS These buttons are used for teletext. Navigation buttons (up/down/left/right) Scrolls through menus or options.

When the message “Magic Remote battery is low. Change the battery.” is displayed, replace the battery. To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching and ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control toward the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse. CAUTION y Do not mix old and new batteries, as this may damage the remote control. (Only UB85**, UB93**, UB95**, UB98**, UC97**) (BACK) Returns to the previous level. (POWER) Turns the TV on or off. Navigation buttons (up/down/left/right) Press the up, down, left or right button to scroll the menu. If you press buttons while the pointer is in use, the pointer will disappear from the screen and Magic Remote will operate like a general remote control. To display the pointer on the screen again, shake Magic Remote to the left and right. Wheel(OK) Press the center of the Wheel button to select a menu. You can change programmes by using the Wheel button. Coloured buttons These access special functions in some menus.

: Red, : Yellow, : Green, : Blue) Adjusts the volume level. (Home) Accesses the Home menu. (EXIT to LIVE) Switches among broadcast (antenna) and various inputs. (Voice recognition)

Scrolls through the saved programmes. /INPUT Displays the Screen Remote.

• Accesses the Universal Control Menu. (Depending on model)
• Pressing and holding the button will display a menu to select an external device that is connected to the TV. Used for viewing 3D video. (Depending on model) (MUTE) Mutes all sounds.
• By Pressing and holding the button, audio descriptions function will be enabled. ENGLISH ENG

ENGLISH ENG Voice recognition Network connection is required to use the voice recognition function.

1. Press the Voice recognition button.

2. Speak when the voice display window appears

on the left of the TV screen. ‡ The voice recognition may fail when you speak too fast or too slow. ‡ Use the Magic remote control no further than 10 cm from your face. ‡ The recognition rate may vary depending on the user’s characteristics (voice, pronunciation, intonation and speed) and the environment (noise and TV volume). Registering Magic Remote How to register the Magic Remote (Wheel)

7RXVHWKH0DJLF5HPRWH¿UVWSDLULW

with your TV. 1 Put batteries into the Magic Remote and turn the TV on. 2 Point the Magic Remote at your TV and press the Wheel (OK) on the remote control.

• If the TV fails to register the Magic Remote, try again after turning the TV off and back on. How to de-register the Magic Remote (BACK) (Home) Press the (BACK) and (Home) EXWWRQVDWWKHVDPHWLPHIRU¿YH seconds, to unpair the Magic Remote with your TV.
• Pressing and holding the (EXIT to LIVE) button will let you cancle and re-register Magic Remote at once. How to use Magic Remote y Shake the Magic Remote slightly to the right and left or press (Home), buttons to make the pointer appear on the screen. (In some TV models, The pointer will appear when you turn the Wheel button.) y If the pointer has not been used for a certain period of time or Magic Remote is placed on a flat surface, then the pointer will disappear. y If the pointer is not responding smoothly, you can reset the pointer by moving it to the edge of the screen. y The Magic Remote depletes batteries faster than a normal remote due to the additional features.

MAGIC REMOTE FUNCTIONS

y Use the Magic Remote within the maximum communication distance (10 m). Using the Magic Remote beyond this distance, or with an object obstructing it, may cause a communication failure. y A communication failure may occur due to nearby devices. Electrical devices such as a microwave oven or wireless LAN product may cause interference, as these use the same bandwidth (2.4 GHz) as the Magic Remote. y The Magic Remote may be damaged or may malfunction if it is dropped or receives a heavy impact. y Take care not to bump into nearby furniture or other people when using the Magic Remote. y Manufacturer and installer cannot provide service related to human safety as the applicable wireless device has possibility of electric wave interference. y It is recommended that an Access Point (AP) be located more than 1 m away from the TV. If the AP is installed closer than 1 m, the Magic Remote may not perform as expected due to frequency interference. ENGLISH ENG Precautions to Take when Using the Magic Remote

User Guide allows you to more easily access the detailed TV information. 1 Press the (Home) button to access the Home menu. 2 Select User Guide and press Wheel(OK). MAINTENANCE Cleaning your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION y Make sure to turn the power off and disconnect the power cord and all other cables first. y When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges.

NOTE y You can also access the User Guide by pressing (User Guide) in the remote control. (Depending on model) Screen, frame, cabinet and stand y To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth. y To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a dry cloth. CAUTION y Avoid touching the screen at all times, as this may result in damage to the screen. y Do not push, rub, or hit the screen surface with your fingernail or a sharp object, as this may result in scratches and image distortions. y Do not use any chemicals as this may damage the product. y Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or malfunction. Power cord Remove the accumulated dust or dirt on the power cord regularly. TROUBLESHOOTING / SPECIFICATIONS

Problem Solution Cannot control the TV with the remote control. No image display and no sound is produced. The TV turns off suddenly. When connecting to the PC (HDMI/DVI), ‘No signal’ or ‘Invalid Format’ is displayed. y Check the remote control sensor on the product and try again. y Check if there is any obstacle between the product and the remote control. y Check if the batteries are still working and properly installed

y Check if the product is turned on. y Check if the power cord is connected to a wall outlet. y Check if there is a problem in the wall outlet by connecting other products. y Check the power control settings. The power supply may be interrupted. y Check if the Automatic Standby (Depending on model) / Sleep Timer / Timer Power Off feature is activated in the Timers settings. y If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity. y Turn the TV off/on using the remote control. y Reconnect the HDMI cable. y Restart the PC with the TV on. SPECIFICATIONS (Only UB85**, UB93**, UB95**, UC97**) Wireless module (LGSBW41) specification Wireless LAN Bluetooth Standard IEEE 802.11a/b/g/n Standard Bluetooth Version 3.0 Frequency Range 2400 to 2483.5 MHz 5150 to 5250 MHz 5725 to 5850 MHz (for Non EU) Frequency Range 2400 to 2483.5 MHz Output Power (Max.) 802.11a: 13 dBm 802.11b: 15 dBm 802.11g: 14 dBm 802.11n - 2.4GHz: 16 dBm 802.11n - 5GHz: 16 dBm Output Power (Max.) 10 dBm or lower y Because band channel used by the country could be different, the user can not change or adjust the operating frequency and this product is set for the regional frequency table. y This device should be installed and operated with minimum distance 20 cm between the device and your body. And this phrase is for the general statement for consideration of user environment.

Standard IEEE 802.11a/b/g/n/ac 2400 to 2483.5 MHz 5150 to 5250 MHz 5725 to 5850 MHz (for Non EU) Frequency Range 802.11a: 14.5 dBm 802.11b: 16 dBm 802.11g: 13.5 dBm 802.11n - 2.4GHz: 14 dBm 802.11n - 5GHz: 15.5 dBm 802.11ac - 5GHz : 16 dBm Output Power (Max.) y Because band channel used by the country could be different, the user can not change or adjust the operating frequency and this product is set for the regional frequency table. y This device should be installed and operated with minimum distance 20 cm between the device and your body. And this phrase is for the general statement for consideration of user environment.

LSW440B LSW440B MSW240

LSW440B MSW240 LSW640B

BEDIENING EXTERN APPARAAT

6(67$9/-$1-(,11$0(âý$1-(

6DPRPRGHOL UB85**='8% =%

6DPRPRGHOL UB85**='8% =%

6DPRPRGHOL UB85**='8% =%

*OHMWHVWUDQ$$ 9LMDNL]DVWRMDOR ($0[/ 6DPRPRGHOL *OHMWHVWUDQ$ 9LMDNL]DVWRMDOR ($0[/ 6DPRPRGHOL *OHMWHVWUDQ$ )HULWQRMHGUR RGYLVQRRGPRGHOD 1DSHOMDYDNDEORY 2EA 6DPRPRGHOL UB85**=$8% 8% *OHMWHVWUDQ$ 1DSHOMDYDNDEORY 2EA

6DPRPRGHOL UB85**='8% =%

$19& .DPHUD]DYLGHRNOLFH

VHPRUDWH]DYHGDWLGDVWHYVNODGX]XVWUH]QR

RGYLVQRRGPRGHOD INPUT Q.MENU SETTINGS

1DYLJDFLMVNLJXPEL JRUGROOHYRGHVQR

B-3 Please contact LG First. If you have any inquiries or comments, please contact LG customer information centre. LG Customer Information Centre Country Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. Country Service