55C7V - OLED TV LG - Free user manual and instructions

USER MANUAL 55C7V LG

Safety and Reference Please read this manual carefully before operating your set and retain it for future reference. 1 LUNA À acer #MFL69727203%x P/NO : MFL69727203 (1701-REVOO) Printed in Korea

DONOTOPEN CAUTION :TO REDUCETHE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFERTO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to the presence of uninsulated dangerous voltage” within the products enclosure that may be ofsufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARMING :TO REDUCETHE RISK OF FIRE AND ELECTRIC SHOCK, À DO NOT EXPOSETHIS PRODUCT TO RAIN OR MOISTURE. ) 110 PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITMES WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES. + Donot place theTV and/or remote control in the following “environments: = A location exposed to direct sunlight = An area with high humidity such as a bathroom - Nearany heat source such as stoves and ather devices that produce heat = Near kitchen counters or humidifiers where they can easily be exposed to steam or oil - An area exposed to rain or wind - Near containers of water such as vases Otherwise, this may result nr, electric shock, malfunction or product deformation = Do not place the product where t might be exposed to dust This may: use a fie hazard + Mains Plug is the TV connecting/disconnecting device to AC mains electric supply. This plug must remain readil attached and operable when TV is in use. + Do not touch the power plug with wet hands. Additional, ifthe cord pin is wet or covered with dust, dry the power plug completely or wipe dust off. You may be electrocuted due to excess moisture. Make sure to connect Mains cable to compliant AC mains socket with Grounded earth pin. (Except for devices which are not grounded on earth.) Otherwise possibility you may be electrocuted or injured. Insert power cable plug completely into wall socket otherwise if not secured completely into socket, fie ignition may break out. Ensure the power cord does not come into contact with hot objects such as à heater, This may cause a fire or an electric shock hazard. Do not place a heavy object, orthe product itself, on power cables. Otherwise, this may result in fre or electric shock. Bend antenna cable between inside and outside building to prevent rain from flowing in. This may cause water damaged inside the Product and could give an electric Shock. + When mountingTV onto wall make sure to neatiy instal and isolate bling from rear of TV as to not create possibility ofelectric shock / fire hazard. Do not plug too many electrical devices into a single multiple electrical outlet. Otherwise, this may result in fire due to over- heating. Do not drop the product or let it fall over when connecting extemal devices. Otherwise, this may result in injury or damage to the product. + Keepthe anti-moisture packing material or vinyl packing out ofthe reach of children. Ant-moisture material is harmful if swallowed. swallowed by mistake, force the patient to vomit and visit the nearest hospital Additionally, vinyl packing can cause suffocation. Keep tout ofthe reach of children. Do not let our children cimb or ing onto the TV. Otherwise, the TV may fall over which may œuse serious injury. Dispose of used batteries carefully to ensure that a small child does not consume them. Please seek Doctor- Medical Attention immediately f child consumes batteries Do not insert any metal objects/conductors (like a metal chopstick/ cutlery/scewdriven into the end of power cable while the power plugis plugged into wall socket. Additional do not touch the power plug right after unplugging from the wal socket. You may be electrocuted. Do not put or store inflammable substances near the product. There is à danger of combustion/explosion or fire due to careless handling of the inflammable substance.

= Do not drop metal objects such as coins, hair pins, hopsticé or ire into the product, riniammable object such as paper and matches, Children must pay particular attention. Electrical shock, fre orinjury can oceur. a foreign objects dropped into the product, unplug the power cord and contact the service centre. Do not spray water on the product or sarub with an inflammable substance (thinner or benzene) ie or electric shock accident an occur. Do not allow any impact shock or any objects to fall into the uit, and do not drop anything onto the screen. You may beinjured or the product can be damaged Never touch this product or antenna during a thunder or ighting storm. You may be electrocuted. Never touch the wall outlet when there is leakage of gas, open the windows and ventlte. may use a fre ora bu by a spark. Do not disassemble, repair or modif the product at your oun discretion ie or electric shock accident an occur. Contact the service centre for check, calibration or repair. Hany ofthe following occur, unplug the product immediately and contact your local service centre. = The product has been damaged Foreign objects have entered the product = The product produced smoke or a strange smell This may result in fe or electric shock. Unplug the TV from AC mains wall socket f ou do not intend to usethe TV for a long period oftime. Accumulated dust can cause fire hazard and insultion deteriortion can œuse electric eakage/ shodk/fie. Apparatus shall not be exposed to dripping or splashing and no objects filed with liquids, such as vases, shal be placed on the apparatus. Do not install this product on a wal fit could be expased to oi or oi mist.This may damage the product and cause t to fall Ifwater enters or comes into contact with TV, AC adapter or power cord please disconnet the power cord and contact service centre immediately, Otherwise, this may result in electric shock or ire. Oniy use an authorized AC adapter and power cord approved by LG Electronic. Otherwise, this may result in ir, electric shock, malfunction or product deformation. + Never Disassemble the AC adapter or power cord. This may result in fire or electric shock. Be creful in handling the adapter to prevent any external shodks to it. An external shock may cause damage to the adapter. Make sure the power ordis connected securely to the power plug ontheTV. Install the product where no radio wave accus There should be enough distance between an outside antenne and power lines to keep the former from touching the ltter even when he antenna fall. This may cause an electric shock Do not install the product on places such as unstable sheves or indined surfaces Also avoid places where there vibration or where the product cannot be fully supported. Otherwise, the product may: fallorlip ver, which may œuse injury or damage to the product. If you install the TV on a stand, you need to take actions to prevent the product from overturing. Otherwise, the product may fall ave, which may cause injury. If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back ofthe product. When you'install the set to use the wall mounting brackt (optional parts), fit carefll 0 as not to drop. Only use the attachments / accessories specified by the manufacture. \hen instaling the antenne, consult with qualifled service technidan. not installed by a qualfiedtechnician, this may create à fie hazard or an electric shock hazard. We recommend that you maintain a distance of at least 2 to 7 times the diagonal screen size wien vtching TV. you watch TV for long period oftime, this may use blured vision. Onlyuse the speced type of battery. This œould cause damage to the remote control. Do not mix new batteries with old batteries. This may cause the batteries to overheat and leak Batteries should not be expased to excessive heat. Fo example, keep away from direct Sunight, open ieplace and electric heater. Signal from Remote Control can be interrupted due to external/ intemal lighting eg Sunlight, fluorescent ighting. this occurs turn offlighting or darken viewing area. \hen connecting extemal devices such as video game consoles, make sure the connecing cables are long enough. Otherwise, the product may fa over, which may œuse injury or damage the product. Do nottum the product On/Off by plugging-in or unplugging the power plug to the wal outlet. (Do not use the power plug for switch) It may cause mechanical failure or could give an electric shock.

+ Please follow the installation instructions below to prevent the product from overheating. = The distance between the productand the wall should be more than 10 cm. = Donotinstall the product in a place with no ventilation (e.g,, on à bookshelf ar in a cuphoard) - Donotinstall the product on a carpet or cushion. = Make sure the air vent is not blocked by a tablecoth or curtain. This may result in fie. Take care not to touch the ventilation openings when watching the TVforlong period as the ventilation openings may become hot. This does not affect the operation or performance ofthe product. Peiodicll examine the cord of your appliance, and its appearance indicates damage or deteroration, unplug it discontinue use ofthe appliance, and have the cord replaced with an exact replacement part by an authorized service. Prevent dust collecting on the power plug pins or outlet. This may use a fie hazard Protect the pouer cord from physical or mechanical abuse, such as being twisted, kinked, pinched, dosed in door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exts the applance. Do not press stronglyuponthe panel with a hand or sharp object such s nal, pencil or pen, or make a scratch on, as may. cause damage to screen. Avoid touching the screen or holding your fingers) against for long period of time. Doing so may produce some temporary or permanent distortion/damage to screen. As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even you turn ofthis unit by SWITCH. When unplugging the cable, grab the plug and unplug , by puling atthe plug. Dont pull atthe cord to unplug the power cord rom the power board, as this could be hazardous. When moving the product, make sure you turn the power off first. Then, unplug the power cables, antenna cables and ll onnectng abs. The TV setor power cord may be damaged, which may create aire hazard or use electric shock. When moving or unpacking the product, work in air because the product is heauy. Otherwise, this may result in injury. Refer all servicing to qualified service personnel, Servicig is required when the apparatus has been damaged in any way, such s power supply cord or plug is damaged, liquid has een spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normall,or has been dropped. = Do not use high voltage electrical goods near the TV (eg. electric mosquito-swatter). This may result in product malfunction. + When cleaning the product and its components, unplug the power first and wipe with a soft doth, Applying excessive force may use scratches or discolouration. Do not spray with water or wipe with a et doth. Never use glass deaner, car or industrial shine, abrasives orwax, benzene, alcohol etc, which can damage the product and it panel. Othervise, this may result in fire, electric shock or product damage (Deformation, corrosion or breakage) Preparing 2 Hfthe TVis turned on for the frsttime after it was shipped from the factory, initialization of the TV may take a few minutes. 2 Image shown may differ from your TV. 2 YourTV5 05D (On Screen Display) may differ light om that shoun inthis manual. = The available menus and options may diffr from the input source or product model that you are using. 2 New features may be added to this TV in the future. = Theitems supplied with your product may vary depending on the model. = Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions. = Foran optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width, Use an extension able that supports USB 2.0 the USB cable or USB memory stick does not fitinto your TVS USB port.

+ Use a certified cable with the HDMI logo attached. Lifting and moving theTV = Ifyou do not use a certifed HDMI cable, the screen may not display or à connection error may occur. (Recommended HDMI Cable Types) High-Speed HDMI®/TN Cable (3 mor less) High-Speed HDMI®/"# Cable with Ethernet (3m or less) Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardessofts type and size. = Htis recommended to move the TV in the box or packing material that + Do not use any unapproved items to ensure the safety theTV originally came in. and product fe span. + Before moing or lifting the TV, disconnectthe power cord and all = Any damage or injures œaused by using unapproved bles items are not covered by the warranty. = When holding the TV, the screen should face away from you to avoid = Some models have a thin fl attached on tothe damage. screen and this must ot be removed. ‘When attaching the stand to the TV set, place the screen fadng down on a cushioned table or la surface to protect the screen from scratches. Make sure that the screws are fastened completely. (If they are not fastened securely enough, the TV may tilt forward after being installed) Do not use too much force and over tighten the screus; otherwise crew may be damaged and not tighten correctiy. + Hold the top and bottom ofthe TV frame firmly, Make sure not to + Make sure to wring any excess water or deaner from hold the transparent part, speaker, or speaker grill area. the doth. + Do not spray water or cleaner directly onto the TV saeen. ILE 28 KT x Make sure to spray just enough of water or deaner onto a dry doth to wipe the screen. — dr J

Separate purchase 2 When transporting a large TV, there should be at least 2 people. Separate purchase items can be changed or modified for quality + When transporting the TV by hand, hold the TV as shown in the improvement without any notification. Contact your dealer to buy followingillustration. these items, These devices only work with certain models. The model name or design may be changed depending on the upgrade of product functions, manufacturer circumstances or policies. {Depending on model) AN-MR650A Magic Remote + When transporting the TV, do not expose the TV to jols or excessive vibration. + When transporting the TV, keep the TV upright, never turn the TV on its side or it towards the left or right.

= Do not apply excessive pressure to cause flexing/bending of frame Basic functions chassis as it may damage screen. = When handling theTV, be careful not to damage the protruding Se Power On (Press) buttons. 2 Q@ Power Of (Press and hold)" + Avoid touching the screen at all times, as this may resulin damage t the sen, ©- @— one control = Donot move the TV by holding the cable holders, as the able holders may break, and injures and damage totheTV may occur. Programmes Control 1° Allrunning apps will dose, and any recording in progress will stop. Using the button Adjusting the menu When the TV is turned on, press the & button one time. You can adjust {Depending on model) the Menu items using the button. You can simply operate the TV functions, using the button. <hpe> © | Tumsthe power off. X_| Clears on-screen displays and returns to TV viewing. | Changes the input source. #3 | Accesses the settings menu. Mounting on a table CN 1. Liftandtiltthe TV into its upright position on a table. + Leave a 10 cm (minimum) space from the wall for proper ventilation. <Btype>

2. Connectthe power cord to a wall outlet.

+ Do not place the TV near or on sources of heat, as this may result in ie ar other damage. + Donotapphy foreign substances (ils lubricants etc.) to the screw parts when assembling the product. {Doing so may damage the product)

Securing the TV to a wall (This feature is not available for all models.) Insert and tighten the eye-bolts, or TV brackets and bolts on the back ofthe TV. + Ifthere are bols inserted at the eye-bolts position, remove the bots first. Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear oftheTV. Connect the eye-bolts and wall racket tightly with a sturdy rope. Make sure to keep the rope horizontal with the lat surface.

+ Use a platform or cabinet that is strong and large enough to support theTV secure) = Bradkets, bots and ropes are not provided. You can obtain additional accessories from your local dealer. + Make sure that children do not dimb on or hang on theTV. Mounting on a wall Attach an optional wall mount bracketat the rear ofthe TV carefuly and'nstal the wall mount bracket on a solid wall perpendicular to thefioor. When you attachthe TV to other building material, please contact qualifid personnel. LG recommends that wall mounting be performed by à qualified professional instaler. We recommend the use of LG5 all mount racket. LGS wall mount bracktis easy to move with cables connected. When you do not use LGS wall mount brachet, please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices. lt is advised to connect al the cables before instllingfied wall mounts. Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions far the wall mount Kits are descibed in thefollowing table. Separate purchase (Wall mounting bracket) OLED55/6587* Model OLED55/65C7* OLEDS5E7* OLED65E7* VESA(AxB)(mm) | 300x200 400 x200 Standard screw M6 M6 Number ofscrews | 4 4 Wall mount bracket | OTW420B OTW4208

+ Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.

+ To remove the stand, hold the top and bottom of stand, then pull it out while also lowering it as shown below. (Only OLEDSSE7*) = Toinstallthe wall mount, use the stand assembly screus to attach the Wall mount over to the bottom ofthe product as shown the figure below. (Only when the tem ofthe following form is provided) Provided item ‘Wall mount

cover D) Connections (notifications) Connect various external devices to the TV and switch input modes to selectan external device. For moe information of external devices connection, refer to the manual provided with each device. Available extemal devices are: HD recevers, DVD players, VS, audio systems, USB storage devices, PC, gaming devices and other exteral devices. = The external device connection may difer from the model. + Connect extemal devices to the TV regardless ofthe order ofthe TV port. = fyourecord a TV program on à DVD recorder orVCR, make sure to connect the TV signal input cable t the TV through DVD recorder or VCR. For more information of recording, refer to the manual provided with the connected device. + Refer to the external equipment manual for operating instructions. = you connect a gaming device to the TV, use the cable supplied th the gaming deice. = InPC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. Ifnoise is present, change the PCoutput to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is dear. = In PC mode, some resolution settings may not work properly depending on the graphics card. = IFULTRA HD content is played on your PC, video or audio may become disruptedintermittentiy depending on your PC performance. = When connedting via a wired LAN, ii recommended to use à CAT7 cable. Antenna connection Connectthe TV to a wall antenna socket with an RF cable (75 0). + Use a signal spliter to use more than 2 Vs. 2 Hfthe image quality is poor, install a signal amplifier properly to improve the image quality. = Hfthe image quality is poor with an antenna connected, try to realign the antenna in the correct direction. + An antenna cable and converter are not supplied. + Supported DTV Audio: MPEG, Dolby Digital, Dolby Digital Plus, HE-AAC + Fora location thatis not supported with ULTRA HD broadcasting, this TV cannot receive ULTRA HD broadcastsdirecty. (Depending on model) Satellite dish connection (Only satelite models) Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 0). CI module connection {epending on model) View the encrypted (pay) services in digital TV mode. = Checkifthe module is inserted into the PCMCIA card slot in the right direction. the module not inserted proper, this can cause damage to the TV and the PCMCIA card slot. +_Ifthe TV does not display any video and audio when CI+- CAM is connected, please contact to the Terrestrial/Cable/Satelite Service Operator.

USB connection Some USB Hubs may not work. a USB device connected through a USB Hub is not detected, connect it directly to the USB port on the TV. Other connections Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. Some separate cable is not provided. + Lt © > General > HDMI ULTRA HD Deep Colour: On : Support 4K @ 50/60 Hz (4:44, :2:2, 420) Off: Support 4K @ 50/60 Hz 8 bit (4:2: Hfthe device connected to Input Port also supports ULTRA HD Deep Colour, your picture may be deare. However, ifthe device doesn't support it, it may not work properly. In that case, connect the device to a different HDMI port or change the TVS HDMI ULTRA HD Deep Colour setting to Of. = Supported HDMI Audio format: DTS (44.1 kHz, 48 kHz), Dolby Digital / Dolby Digital Plus (32 kHz, 44.1 kHz, 48 kHz), PCM (32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHe) {Depending on model) Magic remote functions Wen the message "Magic remote battery is low. Change the battery” is displayed, replace the battery. To replace batteries, apen the battery cover, replace batteries (1.5 V AA) matching the D) and ©) ends to the label inside the compartment, and dose the battery cover. Be sure to point the magic remote toward the remote control sensor on the TV. To remove the batteries, perform theinstalltion actions in reverse. Itis recommended that an Access Point (AP) be located more than 0.2 m away from theTV.IFthe AP is installed doser than 0.2 m the Magic remote may not work properly due to frequency interference. = Some buttons and services may notbe provided depending on model or regions {epending on model) Babe Six

(POWER) Turmns the TV on or of. STB PWR You can turn your set-top box on or off by adding the set-top box to the universal remote control for your TV. Number buttons Enters numbers. Alphabet buttons Entersleters. L1(Space) Opens an empty space on the screen keyboard. LIST Accesses the saved programmes list. El (Screen Remote) Displays the Screen Remote. Accesses the Universal Control Menu. QUICK ACCESS" You can use the application by selecting the number as you edited while using apps or watching Live TV. AD* Audio descriptions function wil be enabled. +22 Adjusts the volume level. APV Scrolls through the saved programmes. IN (MUTE) Mutes all sounds. Ÿ (Voice recognition) Network connection is required to use the voice recognition function. 1 Press the voice recognition button.

2. Speak when the voice display window appears on the TV screen.

O, (SEARCH)* Search for content such as TV programmes, movies and other videos, or perform a web search by entering text in the search bar.

A (HOME) Accesses the Home menu. RECENTS* Shows the previous history, STB MENU Displays the set-top box Home menu. - When you are not watching via a set-top box: the display changes to the set-top box screen. Wheel (OK) Press the center of the Wheel button to select a menu. You can change programmes by using the Wheel button. AV) Navigation buttons (up/down/left/right) Press the up, down, left or right button to scroll the menu. you press A7 > buttons while the pointer is in use, the pointer will disappear from the screen and Magic Remote will operate like a general remote control. To display the pointer on the screen again, shake Magic Remote to the left and right. BACK Returns to the previous level. EXIT* Gears on-screen displays and returns to las input viewing. GUIDE Shows programmes guide. Streaming Service buttons Connects to the Video Streaming Service. Œ (INPUT) Changes the input source. = Pressing and holding the @ button displays all the lists of extemal inputs. ER X% (0. Settings) Accesses the Quick Settings. - Pressing and holding the $ÿ button displays the AI Settings menu Teletext buttons (TEKT, T.OPT) These buttons are used for teletext. MAGIC LINK® Provides content related to the programme you are currently watching. INFO Views the information of the current programme and screen. Control buttons (D, HE) Controls media contents. LIVE ZOOM By z0oming in on the selected area, you can view tin full screen. FOCUS* You can zoom in on the area where the remote control is pointed. =) These acess special functions in some menus.

&D (POWER) Turns the TV on or off. STB PWR You can turn your set-top box on or off by adding the set-top box to the universal remote control for your TV. Number buttons Enters numbers. Alphabet buttons Enters letters. LIST Accesses the saved programmes ist. LA (Space) Opens an empty space on the screen keyboard. El(Screen Remote) Displays the Screen Remote. - Accsses the Universal Control Menu. QUICK ACCESS* You can use the application by selecting the number as you edited while using apps or watching Live TV. AD* Audio descriptions function will be enabled

(me +22— Adjusts the volume level. AP V Scrolls through the saved programmes IX (MUTE) Mutes all sounds. Ÿ (Voice recognition) Network connection is required to use the voice recognition function. 1 Press the voice recognition button.

2. Speak when the voice display window appears on the TV screen.

OÙ (SEARCH)* Search for content such as TV programmes, movies and other videos, or perform a web search by entering text in the search bar. AT (HOME) Accesses the Home menu. RECENTS* Shows the previous history. A sT8 MENU Displays the set-top box Home menu. = When you are not watching via a set-top box: the display changes to ‘the set-top box screen. OWheel (OK) Press the center ofthe Wheel button to select a menu. You an change programmes by using the Wheel button. AV [> Navigation buttons (up/doun/left/right) Press the up, down, left or right button to scroll the menu. Ifyou press A7 €] C> buttons while the pointer is in use, the pointer will isappear from the screen and Magic Remote will operate like a general remote control. To display the pointer on the screen again, shake Magic Remote to the left and right. BACK Returns to the previous level EXIT* Gears on-screen displays and returns to last input viewing GUIDE Shows programmes guide. ER FA Streaming Service buttons Connects to the Video Streaming Service. ŒUNPUT) Changes the input source. = Pressingand holding the @ button displas all the lists of external inputs. EN $ (0 Settings) Accesses the Quick Settings Pressing and holding the #ÿ button displays the AII Settings menu e.®.S,æ These acess special functions in some menus Teletext buttons (TEXT, T.OPT) These buttons are used for teletext. MAGIC LINK Provides content related to the programme you are currently watching, LIVEZ00M By z00ming in on the selected area, you can view tin full screen FOCUS* You can z00m in on the area were the remote control is pointed.

• To use the button, press and hold for more than 3 seconds. Registering magic remote How to register the magic remote To use the Magic Remote, first pairit with your T. 11 Put batteries into the Magic Remote and turn the TV on.

2. Pointthe Magic Remote at your TV and press the ([) Wheel (OK)

on the remote control.

• IFthe TV fils to register the Magic Remote, try again after tuning the TVoffand back on. How to deregister the magic remote Press the BACK and 4 (HOME) buttons at the same time, for five seconds to unpair the Magic Remote with your TV.

• Pressing'and holding the GUIDE button villlet you cancel and re- register Magic Remote at once.

Licenses Supportedlicenses may differ by model. For more information about: licenses, is wwvg.com. ME = dts/»

ŒIDOLBY AUDIO" ŒIDOLBY VISION

1DOLBY ATMOS" Open source software notice information To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit hitp//opensourc.gecom In addition to the source code, al referred license terms, warranty dislaimers and copyright notices are available for dounload LG Electronics will also provide open source code to you on CD-ROM for charge coweing the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.This offers ali for three (3) years from the date on which you purchased the product. External control device setup To obtain the extemal control device setup information, please visit wwwilg.com. Troubleshooting Cannot control the TV with the remote control. + Checkthe remote control sensor on the product and try again. + Checkifthere is any obstacle between the product and the remote control. = Checkifthe batteries are still working and propeiy installed (to @&0OtvO). No image display and no sound is produced. = Checkifthe product isturned on + Checkifthe power cord is connected to a wall outlet. = Checkifther isa problem in the waloutiet by connecting other products. The TVtums offsuddeniy. = Chedkthe power contrl settings. The power supply may be interrupted. + Check ifthe Sleep Timer / Timer Power Off is activated in the Timers settings. + Check ifthe Auto Power Off is activated in the General -> Eco Mode settings. (Depending on model) + Hthere is no signal while theTV son, the TV will turn off automatically after 15 minutes of inactivity. When connecting to the PC (HDMI) No signal or Invalid Format is displayed. 2 Tum the TV off/on using the remote control. = Reconnect the HDMI cable. + Restartthe PC with the TV on.

Abnormal Display = the product feels cold t the touch, there may be a smallflcker" when itis tumed on. This is normal, there is nothing wrong with product. = This panel is an advanced product that contains milions of pixels. You may see tiny back dots and/or brghtlycoloured dot (white, red, blue or green) at sie of 1 ppm on the panel. This does ot indicate à malfunction and does notafectthe performance and relibility of ‘the product. This phenomenon also occurs in third-party products and not subject to exchange or refund You may find different brightness and color ofthe panel depending on yourviewing poston(left/right/top/doun). This phenomenon oceurs due to the characteristic of the panel. Itis not related with the product performance, and it is not malfunction. Displaying til image or prolonged period oftime may cause image sticking.Avoiddisplying a fixed image on the TV screen for à long period oftime. = Some horizontal lines may appear when the Pixel Refresher feature is performed. ti normal and there i no need to be concemed. Generated Sound = “Cradking' noise: À cading noise that occurs when watching or tuning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common or products where thermal deformation is required. = Electrical drcuit humming/panel buzzing: À low leve noiseis generated from a high-speed switching drcuit, which supplies a large amount of current to operate a product. It varies depending on the product. This generated sound does not affect the performance and reliablity ofthe product. Specifications Wireless module specfiations = A6 band channels cn vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table. 2 For consideration ofthe user this device should be installed and operated ith a minimum distance of 20 cm between the device and the body. Wireless LAN (IEEE 802.11a/b/g/n/ac) Frequency range Output power(Max.) 2400 to 2483.5 MHz Wdëm 5150 to 5725 MHz 16.5 dBm 5725 to 5850 MHz (Not for EU) 11.5 dBm Bluetooth Frequency range Output power(Max.) 2400 to 2483.5 MHz 85 dBm

• "IEEE 802.11ac" is not available in all countries. CModule(WxHxD) | 100.0mmx55.0mmx5.0mm Operating Cto40% Temperature 0*Cto40"c Operating Less than 80% Environment Humidity condition Storage -20°Cto60°C Temperature Storage Less than 85 %

@ LG Life's Good Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service MODEL SERIAL