LEXMARK CS310DN - Laser printer

CS310DN - Laser printer LEXMARK - Free user manual and instructions

Find the device manual for free CS310DN LEXMARK in PDF.

📄 201 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice LEXMARK CS310DN - page 191
View the manual : Français FR English EN
Pick your language and provide your email: we'll send you a specifically translated version.
Product typeColor laser printer
BrandLexmark
ModelCS310DN
WeightMore than 18 kg (40 lb)
Supported paper sizesA4, A5, A6, Letter, Legal, Executive, Oficio, Folio, Statement, Universal, Envelopes (7 3/4, 9, 10, DL, C5, B5)
Paper input capacityStandard tray 250 sheets, multipurpose feeder (100 sheets), manual feeder (1 sheet)
Output capacityStandard output bin (approx. 150 sheets)
Duplex printingAutomatic (built-in duplex)
Network connectivityEthernet 10/100 Base-TX, USB 2.0 High Speed, optional Wi-Fi (MarkNet N8352 adapter)
Control panelLCD display, Menu, Select, Arrow, Stop, Sleep, Back buttons
Status indicatorsGreen (ready/processing), Red (intervention required)
Management softwareEmbedded Web Server, browser-based configuration
ConsumablesToner cartridge, toner waste bottle, imaging kit, maintenance kit
CleaningExterior and interior of printer (unplug before)
SafetyClass 1 laser, non-replaceable lithium battery, hot surface inside, weight >18 kg requiring 2 people
Operating temperature15.6 to 32.2 °C (60 to 90 °F)
Relative humidityRecommended 40-60% for storage
NoiseSound emission level (see manual)
Power consumptionNot specified (see manual)

Frequently Asked Questions - CS310DN LEXMARK

How to load paper in the standard tray?
Pull the tray out, adjust the width and length guides according to the size, fan and align the stack, load paper with printable side facing up, then insert the tray. Then set the paper size and type in the Paper menu on the control panel.
How to clear a paper jam?
Locate the jam message on the display (e.g., 'Jam, front door [20y.xx]'). Open the front door or indicated cover, gently remove the jammed paper following the release direction. Close all covers. If the jam persists, refer to the Clearing jams section of the manual.
How to replace the toner cartridge?
Open the front door, remove the old cartridge by pulling it toward you. Unpack the new cartridge, shake it gently to distribute toner, then insert it until it clicks. Close the door. The status indicator should turn green. Refer to the 'Replace cartridge [color]' message to know which color to replace.
How to connect the printer to the Ethernet network?
Plug an Ethernet cable between the printer's Ethernet port and your router/switch. From the control panel, print a network setup page (menu Reports > Network Setup Page) to obtain the IP address. Then install the print driver on your computer using the CD or Lexmark website.
How to set up wireless printing?
You must first install an optional MarkNet N8352 wireless network adapter. Use the Wireless Setup Assistant (Mac) or Wireless Setup Utility (Windows) provided with the software. You can also configure via the Embedded Web Server by temporarily connecting via Ethernet. Enter your network's SSID and security key.
What to do if the printer displays an error message?
Note the error code (e.g., [31.xy], [88.xy]). Refer to the Printer messages section in the manual to identify the cause (missing cartridge, jam, low level, etc.). Follow the instructions: replace the consumable, clear the jam, or contact Lexmark support if the problem persists.
How to clean the printer?
Caution: Unplug the power cord before any cleaning. Use a soft dry cloth for the exterior. For the interior, open the front door and gently remove dust with a vacuum or lint-free cloth. Avoid touching rollers and electrical components. Refer to the Cleaning the printer section for more details.
How to enable duplex printing?
In the print driver, select the Duplex or Print on both sides option. You can also set the default duplex mode via the Settings > Finishing menu on the control panel. Ensure the paper supports duplex (weight 60-105 g/m²).
How to check the status of consumables?
On the control panel, go to Reports > Menu settings page to view estimated levels. You can also use the Embedded Web Server by typing the printer's IP address in a browser, then click on Supplies status. Warning messages (e.g., 'Cartridge low') also display on the screen.
How to download the full manual?
Go to the Lexmark support site: http://support.lexmark.com. Select your country/region, then enter the model CS310DN. In the Documentation section, download the user's guide in PDF format. You can also scan the QR code on the packaging or use the provided CD.

User questions about CS310DN LEXMARK

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Laser printer in PDF format for free! Find your manual CS310DN - LEXMARK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CS310DN by LEXMARK.

USER MANUAL CS310DN LEXMARK

Type(s) de machine(s):

5027

Modèle(s):

210, 230

Contenu

[59] Tiroir incompatible [x]

© 2013 Lexmark International, Inc.

DANGER - Invisible laser radiation when cartridges are removed and interlock defeated. Avoid exposure to laser beam.

Industry Canada compliance statement

This Class B digital apparatus meets all requirements of the Canadian Interference-Caising Equipment Standard ICES-003.

Industry Canada (Canada)

This device complies with Industry Canada specification RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This device has been designed to operate only with the antenna provided. Use of any other antenna is strictly prohibited per regulations of Industry Canada.

To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.

The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF fields in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada's Web site www.hc-sc.gc.ca/rpb.

The term "IC:" before the certification/registration number only signifies that the Industry Canada technical specifications were met.

Industry Canada (Canada)

Lexmark International, Inc., Lexington, KY

This limited warranty applies to the United States and Canada. For customers outside the U.S., refer to the country-specific warranty information that came with your product.

This limited warranty applies to this product only if it was originally purchased for your use, and not for resale, from Lexmark or a Lexmark Remarketer, referred to in this statement as "Remarketer."

Garantie limitée

Lexmark warrants that this product:

—Is manufactured from new parts, or new and serviceable used parts, which perform like new parts

—Is, during normal use, free from defects in material and workmanship

If this product does not function as warranted during the warranty period, contact a Remarketer or Lexmark for repair or replacement (at Lexmark's option).

If this product is a feature or option, this statement applies only when that feature or option is used with the product for which it was intended. To obtain warranty service, you may be required to present the feature or option with the product.

If you transfer this product to another user, warranty service under the terms of this statement is available to that user for the remainder of the warranty period. You should transfer proof of original purchase and this statement to that user.

The warranty period starts on the date of original purchase as shown on the purchase receipt and ends 12 months later provided that the warranty period for any supplies and for any maintenance items included with the printer shall end earlier if it, or its original contents, are substantially used up, depleted, or consumed. Fuser Units, Transfer/Transport Units, Paper Feed items, if any, and any other items for which a Maintenance Kit is available are substantially consumed when the printer displays a "Life Warning" or "Scheduled Maintenance" message for such item.

To obtain warranty service you may be required to present proof of original purchase. You may be required to deliver your product to the Remarketer or Lexmark, or ship it prepaid and suitably packaged to a Lexmark designated location. You are responsible for loss of, or damage to, a product in transit to the Remarketer or the Lexmark designated location.

When warranty service involves the exchange of a product or part, the item replaced becomes the property of the Remarketer or Lexmark. The replacement may be a new or repaired item.

The replacement item assumes the remaining warranty period of the original product.

Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a repair not included in warranty service, damaged beyond repair, or if the product is not free of all legal obligations, restrictions, liens, and encumbrances.

Before you present this product for warranty service, remove all print cartridges, programs, data, and removable storage media (unless directed otherwise by Lexmark).

For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area contact Lexmark on the World Wide Web.

Remote technical support is provided for this product throughout its warranty period. For products no longer covered by a Lexmark warranty, technical support may not be available or only be available for a fee.

Lexmark does not warrant uninterrupted or error-free operation of any product or the durability or longevity of prints produced by any product.

Warranty service does not include repair of failures caused by:

—Modification or unauthorized attachments
—Accidents, misuse, abuse or use inconsistent with Lexmark user's guides, manuals, instructions or guidance
—Unsuitable physical or operating environment
—Maintenance by anyone other than Lexmark or a Lexmark authorized servicer
Operation of a product beyond the limit of its duty cycle
—Use of printing media outside of Lexmark specifications
—Refurbishment, repair, refilling or remanufacture by a third party of products, supplies or parts
—Products, supplies, parts, materials (such as toners and inks), software, or interfaces not furnished by Lexmark

TO THE EXTENT PERMITTED BY APPLICABLE LAW, NEITHER LEXMARK NOR ITS THIRD PARTY SUPPLIERS OR REMARKETERS MAKE ANY OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER EXPRESS OR IMPLIED, WITH

RESPECT TO THIS PRODUCT, AND SPECIFICALLY DISCLAIM THE IMPLIED WARRANTYES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND SATISFACTORY QUALITY. ANY WARRANTYES THAT MAY NOT BE DISCLAIMED UNDER APPLICABLE LAW ARE LIMITED IN DURATION TO THE WARRANTY PERIOD. NO WARRANTYES, EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. ALL INFORMATION, SPECIFICATIONS, PRICES, AND SERVICES ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE.

Your sole remedy under this limited warranty is set forth in this document. For any claim concerning performance or nonperformance of Lexmark or a Remarketer for this product under this limited warranty, you may recover actual damages up to the limit set forth in the following paragraph.

Lexmark's liability for actual damages from any cause whatsoever will be limited to the amount you paid for the product that caused the damages. This limitation of liability will not apply to claims by you for bodily injury or damage to real property or tangible personal property for which Lexmark is legally liable. IN NO EVENT WILL LEXMARK BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGE, OR OTHER ECONOMIC OR CONSEQUENTIAL DAMAGES.

This is true even if you advise Lexmark or a Remarketer of the possibility of such damages. Lexmark is not liable for any claim by you based on a third party claim.

This limitation of remedies also applies to claims against any Suppliers and Remarketers of Lexmark. Lexmark's and its Suppliers' and Remarketers' limitations of remedies are not cumulative. Such Suppliers and Remarketers are intended beneficiaries of this limitation.

Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion or limitation of incidental or consequential damages, so the limitations or exclusions contained above may not apply to you.

This limited warranty gives you specific legal rights. You may also have other rights that vary from state to state.

Patent acknowledgment

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Elliptic Curve Cryptography (ECC) Cipher Suites for Transport Layer Security (TLS) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Cercicom Corp. at the IETF for TLS Elliptic Curve Cipher Suites with SHA-256/382 and AES Galois Counter Mode (GCM) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for TLS Suite B Profile for Transport Layer Security (TLS) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Centicom Corp. at the IETF for Addition of the Camellia Cipher Suites to Transport Layer Security (TLS) implemented in the product or service.

The use of certain patents in this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for AES-CCM ECC Cipher Suites for TLS implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for IKE and IKEv2 Authentication Using the Eliptic Curve Digital Signature Algorithm (ECDSA) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Suite B Cryptographic Suites for IPSec implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Cercicom Corp. at the IETF for Algorithms for Internet Key Exchange version 1 (IKEv1) implemented in the product or service.

Index

[

Bac incompatible [x] [59] 138

bacs

(Push Button Configuration,

(Personal Identification Number,

fournitures, commande

Bac incompatible [x] [59] 138

Bourrage, bac [x] [24y.xx] 135

notifications de fournitures

configuration 122

0

option

cartemémoire 13

option interne disponible 13

options

cartemémoire 13

Wireless Setup Utility 26

Wireless Setup Utility

utilisation 26

X

XPS, menu 85

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : LEXMARK

Model : CS310DN

Category : Laser printer