POLK AUDIO RM4600 - Pregnant

RM4600 - Pregnant POLK AUDIO - Free user manual and instructions

Find the device manual for free RM4600 POLK AUDIO in PDF.

English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
📄

Document temporarily unavailable

The manual is currently being transferred to our new server. It will be accessible again in a few hours. Thank you for your patience.

View the manual : Français FR English EN
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Passive satellite speaker
Brand Polk Audio
Model RM4600
Dimensions (W x H x D) Approximately 15 x 10 x 10 cm
Weight Approximately 1 kg
Nominal impedance 8 ohms
Sensitivity 88 dB
Frequency response 70 Hz - 20 kHz
Power handling 20 - 100 W RMS
Magnetic shielding Yes
Connection type Spring-loaded terminals (plastic)
Enclosure material Plastic with high-gloss finish
Color Black (likely)
Recommended use Surround or front speaker in a home theater system
Wall mounting Possible with #10 screws and wall anchors
Maintenance Dust with a damp cloth, do not use furniture polish
Customer service 800-377-7655 (US and Canada) or polksc@polkaudio.com

Frequently Asked Questions - RM4600 POLK AUDIO

How to mount the RM4600 speaker on the wall?
Use #10 screws for mounting on a stud, or #10 wall anchors with screws if there is no stud. Make sure the screws are securely fastened.
How to connect wires to the speaker terminals?
Insert the stripped wire (without insulation) into the hole of the plastic spring-loaded terminal. Do not insert the insulated part of the wire.
Can I place the speaker near a TV?
Yes, the RM7000 series speakers are magnetically shielded and can be placed near a screen. If you notice distortion or video discoloration, immediately move the speaker away and contact customer service.
What is the best placement for the front speakers?
Create an equilateral triangle between the speakers and the listening position. The speakers should be at ear level.
How to maintain the high-gloss finish of the speaker?
Never use furniture polish. Only dust with a damp cloth.
What type of cable should I use to connect the speaker to the amplifier?
Use standard speaker cable with appropriate gauge (typically 14 to 12 AWG). Make sure to observe polarity (+/-).
Can I use the RM4600 speaker without a subwoofer?
Yes, but the bass performance will be limited. It is recommended to use a subwoofer such as the RM7200 or PSW650 for a complete system.
What is the recommended amplifier power?
An amplifier delivering between 20 and 100 watts RMS per channel is suitable. Be careful not to exceed the maximum power to avoid damaging the speaker.
How to set the high-pass filter if I use a subwoofer?
If the satellites are wall-mounted, set the crossover to a higher frequency (e.g., 80-100 Hz). If they are placed on stands, a lower frequency (e.g., 60-80 Hz) is recommended.
Where can I find the complete manual for the RM4600 speaker?
The manual is available for free in PDF format at notice-facile.com. You can also request a translation by email.

User questions about RM4600 POLK AUDIO

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Pregnant in PDF format for free! Find your manual RM4600 - POLK AUDIO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RM4600 by POLK AUDIO.

USER MANUAL RM4600 POLK AUDIO

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : POLK AUDIO

Model : RM4600

Category : Pregnant