ALBRECHT AE 600 - Motorcycle intercom ALBRECHT - Free user manual and instructions

Product type	Motorcycle intercom driver-passenger
Brand	ALBRECHT
Model	AE 600
Purpose	Voice communication between driver and passenger
Power supply	2 AAA batteries (alkaline or rechargeable)
Battery life	40 to 50 hours with alkaline batteries
Main functions	Duplex intercom, MP3/CD/DVD/NAVI audio input, sensitivity adjustment
Intercom settings	3 levels: high speed, medium, low
Connectivity	3.5 mm jack for external sources
Included components	2 headset sets (ultra-flat speakers, microphone, push-to-talk button), adhesive strips, Velcro strap
Installation	Installation in full-face helmet, without modifying ECE approval
Push-to-talk button	Waterproof, can be mounted on handlebar or glove (optional)
Standards	CE, electromagnetic compatibility EN 55022/55024, safety EN 60065
Maintenance	Clean with a soft dry cloth; do not use solvents
Safety	Do not completely cover the ears; obey traffic laws
Batteries	Do not mix types; recycle at collection points
Dimensions (central unit)	Approximately 60 x 40 x 20 mm (estimated)
Weight	Approximately 30 g (without batteries, estimated)
Repairability	Spare parts available from manufacturer
Customer service	ALAN France: 01 34 21 46 92

Frequently Asked Questions - ALBRECHT AE 600 ALBRECHT

How to install the speakers in the helmet?

Attach the ultra-flat speakers inside the helmet using the adhesive Velcro strips. Make sure not to completely cover the ears to hear traffic sounds. Clean the surface before sticking and press firmly.

What type of batteries to use?

Use two AAA alkaline or rechargeable batteries. Do not mix rechargeable and non-rechargeable batteries, nor full and empty batteries. Observe polarity.

How to adjust the music volume?

Use the 'Volume MP3' dial on the left side of the central unit to adjust the volume of the CD/MP3 player or GPS navigator.

How does the intercom work?

The intercom establishes a duplex connection between driver and passenger. A 4-position push button allows choosing among three sensitivity settings adapted to the motorcycle speed.

Can I use a GPS with this intercom?

Yes, you can connect an external GPS navigator via the 3.5 mm jack. The volume is adjusted with the 'Volume MP3' dial.

How to attach the push-to-talk button?

The push-to-talk button can be mounted on the handlebar or glove using the adjustable Velcro strap provided. If space is limited, you can glue it directly with adhesive strips.

What is the battery life of the device?

With alkaline batteries, the battery life can reach 40 to 50 hours of operation. Power consumption is very low.

Can I use earphones that completely cover the ears?

No, according to traffic regulations, it is forbidden to use earphones that completely cover the ears as this may prevent hearing sound signals. Place the speakers so that there is a small lateral gap.

How to clean the device?

Clean the central unit and accessories with a soft dry cloth. Never use solvents or abrasive products.

Where to find spare parts?

Contact ALAN France technical service at 01 34 21 46 92 or visit www.alanfrance.fr to obtain spare parts and assistance.

USER MANUAL ALBRECHT AE 600 ALBRECHT

[e-mail],

06103 9481-22

Operating manual / Hints for connection Motorbike communication system

AE600

Purpose for use

The communication system AE 600 has been designed for speech communication between motorbike driver and passenger. To achieve this you use the supplied helmet speaker sets OHS 500 which have to be fitted into already existing closed or open helmets (the microphone with it's thin and flexible boom can be installed at both kinds of helmets). As optional solution, also a version with velcro-type microphone (CHS300), only for closed helmets, is available.

The set gives you the opportunity for a real full- duplex communication between driver and passenger and vice versa.

The talking connection can be adjusted in 3 steps according to the surrounding noise.

The following equipment can be connected:

external MP-3 or CD/DVD player or navigator voice output via 3.5mm standard stereo plug

The set is being operated with 3 × AAA size Alkaline or rechargeable NiCd/ NiMH batteries independent from vehicle power supply (not supplied with the intercom).

Declaration of Conformity:

The motorbike communication system fits in conformity with the European EMC directive 2004/108/EG, European EMC standards EN 50 022:2006, EN 55024:1998 with A1 and A2 (2003), EN 60065: 2002 + A1 (2006) (electrical safety) and WEEE / RoHS, and it carries the CE- mark. The actual EC declaration of conformity can be downloaded from www.hobbyradio.de

Conditions for accessory connection

MP-3/Music CD or Navigator voice announcements:

3.5 mm stereo plug (3). To enjoy music in stereo is not possible, the ear-phones get the same signal (mono). The volume is adjustable by the volume control (4).

Hints for installation and connection

Fitting of helmet sets:

The two helmet sets consist of two flat padded ear sets to be inserted in the helmet, a microphone with a flexible thin boom to be installed close to your mouth and a waterproof transmit talk button which can be fixed within reach of the handle-bar or at your glove.

Supplied are two self-adhesive pads for fitting the earphones in the helmet and a velcro tape adjustable in length to install the talk button. These adhesive pads do have an adhesive surface on one side (remove protective foil), on the other side there is a velcro clasp so that ear sets can be easily installed or removed for adjustment or cleaning. Bikers with only limited space to install the talk button i. e. on a metal plate at the handle bars may remove the velcro tape and stick the talk button with adhesive pads directly to the desired location.

Please fix the ear sets with still a small gap between the ears and the helmet. Your ears should not be completely covered by the ear set because then you might not be able to listen to the surrounding noise of traffic (due to Road Traffic Act you may not use headsets that completely cover your ears because you might overhear honking or other signals).

Please do not carry out any technical modifications at the helmet before installing the headset. The ECE standard for motorbike helmets does not permit to flatten the material inside the helmet i.e. to make space for the ear set. Fix the microphone so that it is always close to your mouth with the supplied adhesive pad. Before fixing the adhesive pads thoroughly clean the desired location (i.e. with alcohol, but do not use any solvent). Press tightly and remember that it takes several hours until the final strength has been achieved. The basic installation is very simple- just plug in the 2 headphones (2), and that's it!

Where to locate the central unit

The best place for location of the central unit is inside or close to the tank knap sack or in the outside-pocket of your biker-suit.

Power supply / Inserting of batteries

Open the battery lid at the bottom of the central unit. Insert 3 batteries or rechargeable batteries size AAA (Micro). Pay attention to the correct position of the battery poles.

Warning:

Never use batteries and rechargeable batteries mixed in the battery compartment. Only use batteries or rechargeable batteries of the same kind, and never mix full and empty batteries. Dispose of used batteries only at the authorized collecting points at special dealers. Pay attention to the different containers for batteries and rechargeable batteries. Batteries and rechargeable batteries are special waste, they may not be disposed of with household garbage. Never throw batteries or rechargeable batteries into any fire, never short-circuit the poles of batteries or rechargeable batteries: Danger of fire, explosion or injury may occur!

Operation

Intercom:

The intercom communication quality between driver and pillion depends on the environmental noise and the correct sensitivity adjustment. The AE 600 has a special noise reduction electronic filter that improve the sound quality.

AE 600 has a 4 position slide switch (1). The intercom enables a full duplex conversation: from driver's mic to pillion's headphones and vice versa. You may select 3 different settings:

• Position L (Low): For high speed motorbike driving. The mic sensitivity is rather low to avoid excessive noise pick-up. The setting is adjusted to normal biker's talking behaviour: You speak automatically louder if you are in a noisy, high speed environment.

• Position M (Medium): For medium speed. The mic is now more sensitive, but may react to wind and engine noise in higher speed situations.

• Position H (High): High sensitivity, for low speed and other applications. The mic reacts to normal voice volume.

The audio output of the navigator or Music player is mixed to the headphone audio of driver and passenger and can be adjusted by the VOLUME potentiometer (4) on the left side of the unit.

Electronic Waste Disposal: If you should not need the Intercom any more or if it should become defective and cannot be repaired, the new European WEEE directive does not allow any more to dispose it via your household trash bin. Please dispose electronic items only at the local electronic waste collecting stations, and remove batteries before disposal.

2008

Alan UK Ltd

Unit 2, Callenders,

Paddington Drive,

Swindon, Wiltshire.

SN5 7YW

Telephone:

0044(0)1793882431

Fax :

0044(0)1793882432

For technical assistance contact:

[e-mail]

Position Bas L (Low):

Position Medium M (Medium):

Position Haute H (High):