HybridPump 80 - Water heater TEKA - Free user manual and instructions
Find the device manual for free HybridPump 80 TEKA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Hybrid Heat Pump Water Heater |
| Brand | TEKA |
| Model | HybridPump 80 |
| Capacity | 80 Liters |
| Mounting Type | Floor Standing |
| Dimensions (H x W x D) | 1500 x 600 x 600 mm |
| Weight | 85 kg (approx.) |
| Power Supply | 230 V / 50 Hz |
| Rated Heating Power (Heat Pump) | 800 W |
| Backup Heating Power (Electric Element) | 2000 W |
| Hot Water Flow Rate | 16 L/min at 40°C |
| Energy Efficiency Class | A+ |
| Refrigerant Type | R134a |
| Sound Level | 45 dB(A) |
| Control Type | Digital display with touch controls |
| Functions | Eco mode, Boost mode, Vacation mode, Anti-legionella |
| Frost Protection | Down to -15°C |
| Maintenance | Periodic cleaning of air filter and anode check |
| Safety Features | Pressure relief valve, overheat protection, dry fire protection |
| Included Parts | Installation kit, safety valve, user manual |
| Spare Parts Availability | Genuine TEKA parts available for 10 years |
| Warranty | 5 years on tank, 2 years on parts |
Frequently Asked Questions - HybridPump 80 TEKA
How does the hybrid heat pump system work?
The heat pump extracts heat from the surrounding air and transfers it to the water tank, providing efficient heating. An electric backup element ensures hot water supply even in cold conditions.
What temperature should I set for optimal operation?
Recommended setpoint is 55°C to balance energy savings and comfort. For anti-legionella, periodic heating above 60°C is advised.
How often should I perform maintenance?
Clean the air filter every 3 months and inspect the magnesium anode annually. A qualified technician should check the system every 2 years.
What should I do if the display shows an error code?
Refer to the troubleshooting section of the manual. Common errors relate to water pressure or fan issues. Reset the device by turning it off for 5 minutes; if it persists, contact technical support.
Can the HybridPump 80 be installed outdoors?
Yes, the unit is designed for outdoor installation with IPX4 protection. However, avoid direct rain and ensure proper clearance for airflow.
What is the standby power consumption?
In standby mode, consumption is typically 3-5 watts, maintaining digital controls and sensors without significant energy usage.
How do I clean the air filter?
Turn off the unit, remove the front panel, and gently vacuum or wash the filter with water. Let it dry completely before reinstalling to ensure efficient airflow.
What is the recovery time for a full tank?
Using boost mode with both heat pump and electric element, an 80L tank heats from 15°C to 55°C in about 2.5 hours. Eco mode takes longer but uses less energy.
Is the water heater compatible with solar panels?
Yes, it can be integrated with a solar PV system by programming operation during peak sunlight hours, maximizing self-consumption and reducing grid reliance.
How do I reset the water heater after a fault?
Press and hold the reset button on the control panel for 10 seconds. This clears temporary errors. If the issue recurs, disconnect power for 10 minutes and try again.
User questions about HybridPump 80 TEKA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual HybridPump 80 - TEKA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HybridPump 80 by TEKA.
USER MANUAL HybridPump 80 TEKA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TEKA
Model : HybridPump 80
Category : Water heater