HybridPump 100 - Water heater TEKA - Free user manual and instructions
Find the device manual for free HybridPump 100 TEKA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Hybrid Heat Pump Water Heater |
| Brand | TEKA |
| Model | HybridPump 100 |
| Tank Capacity | 100 Litres |
| Energy Source | Electric with heat pump technology |
| Operation Type | Hybrid (heat pump and electric backup) |
| Dimensions (H × W × D) | Approx. 1200 × 600 × 600 mm |
| Weight | Approx. 85 kg |
| Power Supply | 230 V ~ 50 Hz |
| Heat Pump Power Consumption | 400 W |
| Electric Backup Power | 1500 W |
| Coefficient of Performance (COP) | Up to 3.5 |
| Maximum Water Temperature | 60 °C |
| Tank Material | Enamelled steel |
| Thermal Insulation | Polyurethane foam |
| Corrosion Protection | Magnesium anode |
| Control Panel | Digital display with temperature setting |
| Safety Features | Overheat protection, safety valve, anti-freeze |
| Noise Level | Approx. 45 dB(A) |
| Refrigerant Type | Eco-friendly R134a |
| Maintenance | Periodic drain and anode inspection |
| Repairability | Replaceable heating elements, anode, and sensors |
| Installation Type | Floor standing |
| Warranty | 2 years on parts and labour |
Frequently Asked Questions - HybridPump 100 TEKA
How does a hybrid heat pump water heater work?
It uses a heat pump to extract heat from the surrounding air and transfer it to the water tank. An electric backup element provides additional heating during high demand or low ambient temperatures.
What is the recommended installation location?
Install in a well-ventilated indoor area with temperatures between 7°C and 35°C. Ensure adequate clearance around the unit for airflow and maintenance access. Avoid direct exposure to water splashes.
How do I set the desired water temperature?
Use the digital control panel to adjust the temperature setpoint. Press the + or - buttons to set a temperature between 30°C and 60°C. The display shows the current and set temperatures.
What maintenance does the HybridPump 100 require?
Regularly inspect the magnesium anode at least once a year and replace it if worn. Drain and flush the tank every 6-12 months to remove sediment. Clean the air filter of the heat pump periodically.
The water is not hot enough, what should I check?
Check the set temperature, ensure the electric backup is enabled, and verify the heat pump is not in defrost mode. Also, consider if the unit is near a cold water source or if the ambient temperature is too low.
Can I install the heater outdoors?
The HybridPump 100 is intended for indoor installation only. Exposure to rain, direct sunlight, or freezing temperatures can damage the unit and void the warranty.
How long does it take to heat a full tank?
The heating time depends on the ambient temperature and starting water temperature. Typically, it takes about 3-5 hours to heat a full 100L tank from 15°C to 60°C using the heat pump alone, and about 1-2 hours with electric backup.
Is it normal to hear noise during operation?
Yes, the compressor and fan generate a low hum of about 45 dB(A). This is normal. If you hear unusual clicks or loud noises, check for loose parts or contact support.
How do I save energy with this device?
Use the heat pump mode as much as possible, set the temperature to 50°C instead of 60°C, and install the unit in a warm, ventilated room. Schedule heating during off-peak electricity hours if available.
What should I do if the appliance displays an error code?
Refer to the manual for a description of the error code. Common issues include flow failure or sensor malfunction. Turn off the unit, check the water supply and connections, then restart. If the problem persists, contact a qualified technician.
User questions about HybridPump 100 TEKA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual HybridPump 100 - TEKA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HybridPump 100 by TEKA.
USER MANUAL HybridPump 100 TEKA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TEKA
Model : HybridPump 100
Category : Water heater