EWH 30 VR1.5 - Water heater TEKA - Free user manual and instructions
Find the device manual for free EWH 30 VR1.5 TEKA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Water Heater (Storage) |
| Brand | Teka |
| Model | EWH 30 VR1.5 |
| Capacity | 30 Litres |
| Rated Power | 1.5 kW (1500 W) |
| Voltage | 220-240 V AC, 50 Hz |
| Heating Element | Stainless steel immersion heater |
| Temperature Range | 35°C to 75°C |
| Thermostat | Adjustable thermostat with temperature control |
| Mounting Type | Vertical wall-mounted |
| Water Connection | 1/2" BSP inlet/outlet |
| Maximum Operating Pressure | 0.8 MPa (8 bar) |
| Inner Tank Material | Enamelled carbon steel |
| Corrosion Protection | Magnesium anode |
| Insulation | High-density polyurethane foam |
| Weight | Approx. 17 kg |
| Dimensions (H x D) | 650 mm x 360 mm |
| Ingress Protection | IPX4 |
| Safety Features | Pressure relief valve, overheat sensor, dry-firing protection |
| Included Accessories | Safety valve, mounting kit, user manual |
| Maintenance | Annual drain and anode check |
| Repairability | Replaceable heating element and thermostat; spare parts available |
Frequently Asked Questions - EWH 30 VR1.5 TEKA
How do I install the Teka EWH 30 VR1.5 water heater?
Installation must be carried out by a qualified professional. Ensure the wall can support the weight and that water and electrical connections are properly made. Follow the dimensions in the manual.
Can I adjust the water temperature?
Yes, the thermostat allows you to set the temperature between 35°C and 75°C. Turn the knob to your desired setting.
How long does it take to heat 30 litres of water?
With a 1.5 kW element, heating from 15°C to 65°C takes approximately 60-70 minutes, depending on ambient temperature and insulation.
How do I drain the water heater?
Switch off power and close the inlet valve. Connect a hose to the drain valve at the bottom and open it to release water completely.
What safety devices are included?
The unit includes a temperature and pressure relief valve, overheat thermostat, and dry-heating protection to ensure safe operation.
Does it need a power connection with a plug?
The heater is usually designed for a fixed wired connection. If a plug is included, it should match local standards; otherwise, a qualified electrician must connect it via a suitable isolator.
What does 'EWH 30 VR1.5' stand for?
It indicates an Electric Water Heater with a 30-liter capacity, vertical design, and 1.5 kW heating power.
How often should I maintain the heater?
We recommend checking the magnesium anode and draining the tank at least once a year to prevent sediment build-up and extend lifespan.
Is the tank corrosion-resistant?
The inner tank is made of enamelled carbon steel and is protected by a magnesium anode, which anti-corrosion protection for years of service.
Where can I get spare parts?
Spare parts such as thermostats, heating elements, and anodes are available through authorized Teka service centers or online spare parts retailers.
User questions about EWH 30 VR1.5 TEKA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual EWH 30 VR1.5 - TEKA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EWH 30 VR1.5 by TEKA.
USER MANUAL EWH 30 VR1.5 TEKA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TEKA
Model : EWH 30 VR1.5
Category : Water heater