GE-CC 18/110 Li E - Uncategorized EINHELL - Free user manual and instructions
Find the device manual for free GE-CC 18/110 Li E EINHELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Battery grass trimmer |
| Brand | EINHELL |
| Model | GE-CC 18/110 Li E |
| Power supply | 18 V lithium-ion battery |
| Battery type | Power X-Change |
| Nominal voltage | 18 V |
| Battery capacity | Compatible with all 18 V Power X-Change batteries (e.g., 2.0 Ah) |
| Approximate runtime | Up to 30 min with a 2.0 Ah battery depending on usage |
| Charging time | Approximately 90 min with a standard 2 A charger |
| Cutting width | 110 mm |
| Blade type | Stainless steel cutting blade |
| No-load speed | 1,200 rpm |
| Weight | Approximately 1.5 kg |
| Dimensions | Approximately 40 x 12 x 12 cm |
| Handle | Ergonomic non-slip handle |
| Noise level | Approximately 74 dB (A) |
| Maintenance | Sharpen the blades and lubricate the moving parts regularly |
| Cleaning | Clean with a soft brush and a damp cloth after each use |
| Safety | Safety lock, blade guard, disconnect the battery before maintenance |
| Spare parts | Spare blades, screws, batteries and charger available |
| Repairability | Repairable with EINHELL original parts, simple diagnostics |
| General information | Cordless device compatible with the Power X-Change system from the EINHELL range |
Frequently Asked Questions - GE-CC 18/110 Li E EINHELL
What is the cutting width of the GE-CC 18/110 Li E grass trimmer?
The cutting width is 110 mm, as indicated in the reference. This allows for precise cutting along borders and under bushes.
Can I use an existing Einhell Power X-Change 18 V battery with this device?
Yes, the GE-CC 18/110 Li E is compatible with all Power X-Change 18 V batteries from the Einhell range. You can therefore use batteries from other tools in the same range.
How do I replace the blade on the GE-CC 18/110 Li E?
Remove the battery, unscrew the central screw holding the blade, then remove the old blade. Place the new blade respecting the cutting direction and tighten the screw firmly. Wear protective gloves.
How do I clean the device after use?
After removing the battery, remove grass residue with a soft brush. Wipe the blades and housing with a damp cloth, then dry them. Do not use aggressive solvents.
What is the runtime of the grass trimmer with a 2.0 Ah battery?
The runtime depends on the battery condition and grass density. With a charged 2.0 Ah battery, expect around 20 to 30 minutes in normal use.
Is the GE-CC 18/110 Li E noisy?
The noise level is approximately 74 dB(A). It is recommended to wear hearing protection during prolonged use.
What safety precautions should I take?
Wear safety glasses and protective gloves, make sure the battery is properly locked, do not cut near stones or cables, and store the device out of reach of children.
Can you cut wet grass with this device?
Yes, but wet grass tends to clump and slow down the work. It is better to wait until the lawn is dry for a cleaner result.
How do I maintain the blades to keep them effective?
Check the condition of the blades regularly, clean them and have them sharpened if they are dull. Apply a drop of lubricating oil to the blade after cleaning.
Where can I find spare parts for the GE-CC 18/110 Li E?
Parts such as blades, screws, batteries and the charger are available from the EINHELL after-sales service and authorized dealers. Always indicate the exact model.
User questions about GE-CC 18/110 Li E EINHELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual GE-CC 18/110 Li E - EINHELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GE-CC 18/110 Li E by EINHELL.