TC-PL 800 - Uncategorized EINHELL - Free user manual and instructions
Find the device manual for free TC-PL 800 EINHELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Hand-held electric planer |
| Brand | EINHELL |
| Model | TC-PL 800 |
| Power | 800 W |
| No-load speed | 18,000 rpm |
| Planing width | 82 mm |
| Planing depth | 0 to 2.5 mm |
| Rebate depth | 0 to 12 mm |
| Number of blades | 2 |
| Power supply | Mains 230-240 V / 50 Hz |
| Cable length | 2 m |
| Weight | 2.8 kg |
| Dimensions (L x W x H) | 290 x 170 x 170 mm |
| Sound pressure level | 89 dB(A) |
| Sound power level | 100 dB(A) |
| Vibration | 4.2 m/s² |
| Protective cover | Yes |
| Safety switch | Yes |
| Parallel guide | Yes |
| Maintenance | Regular cleaning, replacement of blades |
| Spare parts | Planer blades, blade holders available |
| Repairability | Designed to be repairable |
| Included accessories | Parallel guide, wrench, dust bag |
Frequently Asked Questions - TC-PL 800 EINHELL
How to change the planer blades?
Unplug the device, use the supplied wrench to loosen the screws on the blade holder, remove the old blades, install the new ones making sure they are aligned, then tighten firmly. Check the balance before using again.
How to adjust the planing depth?
Turn the adjustment knob located on the front sole. The scale corresponds to the maximum cutting depth. Test on a piece of scrap wood.
What safety precautions should be taken?
Wear safety glasses and a dust mask, do not wear loose clothing, keep your hands away from the cutting area, and use a suitable vacuum cleaner.
How to clean the device after use?
Unplug it, remove chips with a brush, clean the sole and the housing with a dry cloth. Do not use hydrocarbon-based products.
Can rebates be made with the TC-PL 800?
Yes, thanks to the adjustable rebate depth up to 12 mm. Use the parallel guide for a clean cut.
How to avoid vibrations during planing?
Make sure the blades are sharp and balanced, the workpiece is held firmly, and work at a constant speed.
Why is the planed surface uneven?
This can be due to excessive depth, dull blades, or a dirty sole. Reduce the depth, replace the blades and clean the sole.
How to use the parallel guide?
Attach the guide to the side of the planer, set the distance according to the desired width, then make a regular cut.
What regular maintenance is required?
After each use, empty the dust bag, clean the air vents, and check the condition of the blades. Replace them as soon as they are dull.
What accessories are included with the device?
The TC-PL 800 comes with a parallel guide, a socket wrench, a dust bag and the instruction manual.
User questions about TC-PL 800 EINHELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual TC-PL 800 - EINHELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TC-PL 800 by EINHELL.
USER MANUAL TC-PL 800 EINHELL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EINHELL
Model : TC-PL 800
Category : Uncategorized