TP-AG 230/2400 - Grinders EINHELL - Free user manual and instructions
Find the device manual for free TP-AG 230/2400 EINHELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Angle grinder |
| Brand | EINHELL |
| Model | TP-AG 230/2400 |
| Category | Grinder |
| Disc diameter | 230 mm |
| Power | 2400 W |
| No-load speed | 6500 rpm |
| Spindle thread | M14 |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Weight | 5.8 kg |
| Protection class | II (double insulated) |
| Tool mounting | Bolt-on with flange |
| Cutting capacity | Cutting and grinding metal, stone, concrete |
| Applications | Cutting, grinding, rough sanding |
| Safety features | Guard, safety switch, anti-restart protection |
| Ergonomics | Rear handle and side handle for two-handed control |
| Maintenance | Brush replacement, cleaning of vents |
| Spare parts | Carbon brushes, disc flanges, switching mechanism available |
| Included accessories | Protection guard, side handle, wrench |
Frequently Asked Questions - TP-AG 230/2400 EINHELL
What type of disc can be used with the EINHELL TP-AG 230/2400?
The EINHELL TP-AG 230/2400 uses 230 mm cut-off or grinding discs with a 22.2 mm bore and M14 spindle thread.
How do I change the disc on this angle grinder?
To change the disc, first unplug the grinder. Press the spindle lock, use the supplied wrench to loosen the flange nut, remove the old disc, and place the new one. Retighten the nut firmly and release the lock.
Can the TP-AG 230/2400 be used for cutting concrete?
Yes, with a suitable diamond cutting disc for concrete, the TP-AG 230/2400 can effectively cut concrete and masonry. Always follow safety guidelines and use the protective guard.
What safety precautions should I take while using this grinder?
Always wear eye protection and gloves, use the protective guard, keep the work area clear, check the disc for damage before use, and ensure the grinder is unplugged when changing parts or performing maintenance.
Does the grinder have restart protection?
Yes, the TP-AG 230/2400 is equipped with anti-restart protection to prevent accidental start-up after a power interruption. This ensures the grinder does not restart without being switched off first.
How should I maintain the angle grinder?
Regularly check the carbon brushes and replace them when worn, keep the air vents clean and free of dust, and inspect the power cord for damage. Periodically lubricate the gearbox as described in the manual.
What is the maximum cutting depth?
With a 230 mm disc, the maximum cutting depth is approximately 60 mm. This varies depending on the disc thickness and material being cut.
Can I use it for polishing or sanding?
Yes, you can attach flap discs or sanding pads with the appropriate backing pad for polishing and sanding applications. Make sure the accessory is rated for the grinder's speed and size.
What power outlet does the TP-AG 230/2400 require?
The grinder operates on 230 V and 50 Hz AC power, which is standard in most European household outlets. Always connect it to a suitable grounded or double-insulated rated socket.
Where can I find spare parts for the EINHELL TP-AG 230/2400?
Spare parts such as carbon brushes, flanges, and switches are available through authorized EINHELL service centers or online retailers. Always use original parts for safety and performance.
User questions about TP-AG 230/2400 EINHELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Grinders in PDF format for free! Find your manual TP-AG 230/2400 - EINHELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TP-AG 230/2400 by EINHELL.
USER MANUAL TP-AG 230/2400 EINHELL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EINHELL
Model : TP-AG 230/2400
Category : Grinders