DC20002 - Dust extractor Vevor - Free user manual and instructions
Find the device manual for free DC20002 Vevor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Dust extractor |
| Brand | Vevor |
| Model | DC20002 |
| Recommended use | Workshop, woodworking, DIY |
| Supply voltage | 230 V / 50 Hz |
| Motor power | 1500 W (2 HP) |
| Maximum air flow | 2400 m³/h |
| Tank capacity | 50 L |
| Filtration type | Felt bag, 1 micron filtration |
| Connection diameter | 100 mm (4 inches) |
| Included flexible hose length | 2 m |
| Dimensions (L x D x H) | 65 x 45 x 95 cm |
| Net weight | 32 kg |
| Noise level | Approximately 75 dB |
| Maintenance and cleaning | Empty and clean the bag after each use |
| Safety | Motor thermal protection against overloads |
| Spare parts and repairability | Spare bags and filters available |
| Warranty | 1-year manufacturer warranty |
| General information | Instruction manual included |
Frequently Asked Questions - DC20002 Vevor
What is the power of the VEVOR DC20002 dust extractor?
The VEVOR DC20002 is equipped with a 1500 W (2 HP) motor that provides sufficient power to suck up wood shavings and workshop dust.
How to install the VEVOR DC20002 dust extractor?
Install the extractor on a flat and stable surface. Connect the flexible hose to the 100 mm connection and attach the other end to your machine. Make sure the ventilation is sufficient.
What is the diameter of the DC20002 suction connection?
The suction connection has a diameter of 100 mm (4 inches), compatible with most woodworking machines.
How to maintain the VEVOR DC20002 filtration bag?
The filtration bag must be emptied after each use. For deeper maintenance, dust it off with a soft brush or air blower. Wash it with water if necessary, but let it dry completely before reinstalling it.
Can I use the VEVOR DC20002 extractor to vacuum water?
No, this device is designed only for dry use. Vacuuming water can damage the motor and the filtration.
What to do if the extractor motor does not start?
Check the thermal protection (the button may have tripped). Let it cool down then reset the circuit breaker. Also check the power outlet and the cable.
How to replace the DC20002 collection bag?
Unclip the collection bag located under the outlet, then replace it with a new one. To disassemble, open the clamps and remove the bag. Make sure it is properly secured before restarting.
Is this model suitable for professional use?
Yes, the VEVOR DC20002 is suitable for intensive use in professional workshops, thanks to its power and 50 L collection capacity. It is robust and reliable.
What safety precautions should be observed?
Wear protective equipment such as safety glasses and a mask. Do not use the appliance without the filtration bag. Keep children and animals away, and turn off the power before any cleaning operation.
What is the collection capacity of the DC20002 tank?
The tank has a capacity of 50 L, allowing prolonged work without having to empty the bag too often.
User questions about DC20002 Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dust extractor in PDF format for free! Find your manual DC20002 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DC20002 by Vevor.
USER MANUAL DC20002 Vevor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vevor
Model : DC20002
Category : Dust extractor